diff mbox series

[v2,06/12] configs: stm32f769-disco: Migrate SPL flags to defconfig

Message ID 20220427115401.155400-7-patrice.chotard@foss.st.com
State Accepted
Commit 5ff7f0490d134bc52e8d654d2c4dfadaf60b5b8c
Delegated to: Patrick Delaunay
Headers show
Series stm32: add new board support, defconfig and documentation | expand

Commit Message

Patrice CHOTARD April 27, 2022, 11:53 a.m. UTC 
Migrate SPL flags to stm32f769-disco_spl_defconfig

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 configs/stm32f769-disco_spl_defconfig | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

Comments

Patrice CHOTARD May 10, 2022, 8:46 a.m. UTC | #1 
On 4/27/22 13:53, Patrice Chotard wrote:
> Migrate SPL flags to stm32f769-disco_spl_defconfig
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  configs/stm32f769-disco_spl_defconfig | 25 +++++++++++++++++++++----
>  1 file changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
> index f151dab04f..672c1ec065 100644
> --- a/configs/stm32f769-disco_spl_defconfig
> +++ b/configs/stm32f769-disco_spl_defconfig
> @@ -3,12 +3,19 @@ CONFIG_ARCH_STM32=y
>  CONFIG_SYS_TEXT_BASE=0x08008000
>  CONFIG_SYS_MALLOC_LEN=0x100000
>  CONFIG_SYS_MALLOC_F_LEN=0xE00
> +CONFIG_SPL_GPIO=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_NR_DRAM_BANKS=1
>  CONFIG_ENV_SIZE=0x2000
>  CONFIG_DEFAULT_DEVICE_TREE="stm32f769-disco"
>  CONFIG_SPL_TEXT_BASE=0x8000000
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
>  CONFIG_STM32F7=y
>  CONFIG_TARGET_STM32F746_DISCO=y
> +CONFIG_SPL=y
> +CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>  CONFIG_SYS_LOAD_ADDR=0x8008000
>  CONFIG_DISTRO_DEFAULTS=y
>  CONFIG_BOOTDELAY=3
> @@ -18,6 +25,11 @@ CONFIG_AUTOBOOT_STOP_STR=" "
>  CONFIG_USE_BOOTARGS=y
>  CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>  # CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_MTD_SUPPORT=y
> +CONFIG_SPL_XIP_SUPPORT=y
> +CONFIG_SPL_DM_RESET=y
>  CONFIG_SYS_PROMPT="U-Boot > "
>  CONFIG_CMD_GPT=y
>  # CONFIG_RANDOM_UUID is not set
> @@ -29,15 +41,16 @@ CONFIG_CMD_LINK_LOCAL=y
>  CONFIG_CMD_BMP=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_TIMER=y
> -# CONFIG_SPL_DOS_PARTITION is not set
>  # CONFIG_ISO_PARTITION is not set
> -# CONFIG_SPL_EFI_PARTITION is not set
>  CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_NETCONSOLE=y
> -# CONFIG_SPL_BLK is not set
> -# CONFIG_SPL_DM_MMC is not set
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_SPL_CLK=y
>  CONFIG_ARM_PL180_MMCI=y
>  CONFIG_MTD=y
>  CONFIG_DM_MTD=y
> @@ -51,9 +64,13 @@ CONFIG_DM_ETH=y
>  CONFIG_ETH_DESIGNWARE=y
>  CONFIG_MII=y
>  # CONFIG_PINCTRL_FULL is not set
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_SPL_RAM=y
> +CONFIG_SPECIFY_CONSOLE_INDEX=y
>  CONFIG_SPI=y
>  CONFIG_DM_SPI=y
>  CONFIG_STM32_QSPI=y
> +CONFIG_SPL_TIMER=y
>  CONFIG_DM_VIDEO=y
>  CONFIG_BACKLIGHT_GPIO=y
>  CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
Applied to u-boot-stm32

Thanks
Patrice
diff mbox series

Patch

diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index f151dab04f..672c1ec065 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -3,12 +3,19 @@  CONFIG_ARCH_STM32=y
 CONFIG_SYS_TEXT_BASE=0x08008000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SYS_MALLOC_F_LEN=0xE00
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32f769-disco"
 CONFIG_SPL_TEXT_BASE=0x8000000
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
+CONFIG_SPL=y
+CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
 CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
@@ -18,6 +25,11 @@  CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_XIP_SUPPORT=y
+CONFIG_SPL_DM_RESET=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_CMD_GPT=y
 # CONFIG_RANDOM_UUID is not set
@@ -29,15 +41,16 @@  CONFIG_CMD_LINK_LOCAL=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_ISO_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
-# CONFIG_SPL_BLK is not set
-# CONFIG_SPL_DM_MMC is not set
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SPL_CLK=y
 CONFIG_ARM_PL180_MMCI=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
@@ -51,9 +64,13 @@  CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 # CONFIG_PINCTRL_FULL is not set
+CONFIG_SPL_PINCTRL=y
+CONFIG_SPL_RAM=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_STM32_QSPI=y
+CONFIG_SPL_TIMER=y
 CONFIG_DM_VIDEO=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y