[08/11] vexpress64: defconfigs: allow default commands

Message ID	20220304163018.3167841-9-andre.przywara@arm.com
State	Awaiting Upstream
Delegated to:	Tom Rini
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Andre Przywara <andre.przywara@arm.com> To: Liviu Dudau <liviu.dudau@foss.arm.com>, Linus Walleij <linus.walleij@linaro.org> Cc: Peter Hoyes <peter.hoyes@arm.com>, Tom Rini <trini@konsulko.com>, Simon Glass <sjg@chromium.org>, u-boot@lists.denx.de, Sean Anderson <sean.anderson@seco.com> Subject: [PATCH 08/11] vexpress64: defconfigs: allow default commands Date: Fri, 4 Mar 2022 16:30:15 +0000 Message-Id: <20220304163018.3167841-9-andre.przywara@arm.com> In-Reply-To: <20220304163018.3167841-1-andre.przywara@arm.com> References: <20220304163018.3167841-1-andre.przywara@arm.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	vexpress64: OF_CONTROL and ARMv8-R64 support \| expand [00/11] vexpress64: OF_CONTROL and ARMv8-R64 support [01/11] vexpress64: fvp: Fix automatic boot [02/11] vexpress64: Kconfig: move board definitions out of arch/arm [03/11] arm: dts: Add Arm FVP Fastmodel RevC .dts files from Linux [04/11] vexpress64: fvp: enable OF_CONTROL [05/11] vexpress64: config header: unify environment definition [06/11] vexpress64: move hardware setting from defconfig to Kconfig [07/11] vexpress64: fvp: add distro_boot support [08/11] vexpress64: defconfigs: allow default commands [09/11] vexpress64: generalise page table generation [10/11] vexpress64: pick DRAM size from DT [11/11] vexpress64: Add ARMv8R-64 board variant

Message ID

20220304163018.3167841-9-andre.przywara@arm.com

State

Awaiting Upstream

Delegated to:

Tom Rini

Headers

From: Andre Przywara <andre.przywara@arm.com>
To: Liviu Dudau <liviu.dudau@foss.arm.com>,
 Linus Walleij <linus.walleij@linaro.org>
Cc: Peter Hoyes <peter.hoyes@arm.com>, Tom Rini <trini@konsulko.com>,
 Simon Glass <sjg@chromium.org>, u-boot@lists.denx.de,
 Sean Anderson <sean.anderson@seco.com>
Subject: [PATCH 08/11] vexpress64: defconfigs: allow default commands
Date: Fri,  4 Mar 2022 16:30:15 +0000
Message-Id: <20220304163018.3167841-9-andre.przywara@arm.com>
In-Reply-To: <20220304163018.3167841-1-andre.przywara@arm.com>
References: <20220304163018.3167841-1-andre.przywara@arm.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: list
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot" <u-boot-bounces@lists.denx.de>

Series

vexpress64: OF_CONTROL and ARMv8-R64 support | expand

Commit Message

Andre Przywara March 4, 2022, 4:30 p.m. UTC

Right now the defconfig the Arm VExpress64 boards disables quite some
standard commands, for apparently no good reasons (as image size is
hardly a concern here).

Remove the lines explicitly disabling those features, leaving it to
the U-Boot default settings to set them.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/vexpress_aemv8a_juno_defconfig | 8 --------
 configs/vexpress_aemv8a_semi_defconfig | 9 ---------
 2 files changed, 17 deletions(-)

Comments

Tom Rini April 3, 2022, 12:14 a.m. UTC | #1

On Fri, Mar 04, 2022 at 04:30:15PM +0000, Andre Przywara wrote:

> Right now the defconfig the Arm VExpress64 boards disables quite some
> standard commands, for apparently no good reasons (as image size is
> hardly a concern here).
> 
> Remove the lines explicitly disabling those features, leaving it to
> the U-Boot default settings to set them.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Applied to u-boot/next, thanks!

diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig
index b51f946ee1..811f2bae04 100644
--- a/configs/vexpress_aemv8a_juno_defconfig
+++ b/configs/vexpress_aemv8a_juno_defconfig
@@ -13,19 +13,11 @@  CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlycon=pl
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="VExpress64# "
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_ARMFLASH=y
-# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SATA=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_CACHE=y
-# CONFIG_CMD_SLEEP is not set
 CONFIG_CMD_UBI=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig
index abbff36de9..cc39493ec7 100644
--- a/configs/vexpress_aemv8a_semi_defconfig
+++ b/configs/vexpress_aemv8a_semi_defconfig
@@ -12,20 +12,11 @@  CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31 loglevel=9"
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="VExpress64# "
-# CONFIG_CMD_CONSOLE is not set
 CONFIG_CMD_ABOOTIMG=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_ARMFLASH=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_CACHE=y
-# CONFIG_CMD_SLEEP is not set
 CONFIG_CMD_UBI=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y

[08/11] vexpress64: defconfigs: allow default commands

Commit Message

Comments

Patch