| Message ID | 20220209101042.78036-6-takahiro.akashi@linaro.org |
|---|---|
| State | Accepted, archived |
| Commit | bad58cb308acdf739e855e3336dfdf1a8d7b08a4 |
| Delegated to: | Heinrich Schuchardt |
| Headers | show |
| Series | efi_loader: capsule: improve capsule authentication support | expand |
On 2/9/22 11:10, AKASHI Takahiro wrote: > Add a couple of test cases against capsule image authentication > for capsule-on-disk, where only a signed capsule file with the verified > signature will be applied to the system. > > Due to the difficulty of embedding a public key (esl file) in U-Boot > binary during pytest setup time, all the keys/certificates are pre-created. > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > Reviewed-by: Simon Glass <sjg@chromium.org> > Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> The test is not executed on Gitlab: test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py sss SKIPPED [3] /builds/u-boot/custodians/u-boot-efi/test/py/conftest.py:490: .config feature "efi_capsule_authenticate" not enabled Please, provide a defconfig with CONFIG_EFI_CAPSULE_AUTHENTICATE=y in a follow-up patch. Best regards Heinrich > --- > .../py/tests/test_efi_capsule/capsule_defs.py | 5 + > test/py/tests/test_efi_capsule/conftest.py | 52 +++- > test/py/tests/test_efi_capsule/signature.dts | 10 + > .../test_capsule_firmware_signed.py | 254 ++++++++++++++++++ > 4 files changed, 318 insertions(+), 3 deletions(-) > create mode 100644 test/py/tests/test_efi_capsule/signature.dts > create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > > diff --git a/test/py/tests/test_efi_capsule/capsule_defs.py b/test/py/tests/test_efi_capsule/capsule_defs.py > index 4fd6353c2040..59b40f11bd1d 100644 > --- a/test/py/tests/test_efi_capsule/capsule_defs.py > +++ b/test/py/tests/test_efi_capsule/capsule_defs.py > @@ -3,3 +3,8 @@ > # Directories > CAPSULE_DATA_DIR = '/EFI/CapsuleTestData' > CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule' > + > +# v1.5.1 or earlier of efitools has a bug in sha256 calculation, and > +# you need build a newer version on your own. > +# The path must terminate with '/' if it is not null. > +EFITOOLS_PATH = '' > diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py > index 6ad5608cd71c..27c05971ca32 100644 > --- a/test/py/tests/test_efi_capsule/conftest.py > +++ b/test/py/tests/test_efi_capsule/conftest.py > @@ -10,13 +10,13 @@ import pytest > from capsule_defs import * > > # > -# Fixture for UEFI secure boot test > +# Fixture for UEFI capsule test > # > > - > @pytest.fixture(scope='session') > def efi_capsule_data(request, u_boot_config): > - """Set up a file system to be used in UEFI capsule test. > + """Set up a file system to be used in UEFI capsule and > + authentication test. > > Args: > request: Pytest request object. > @@ -40,6 +40,36 @@ def efi_capsule_data(request, u_boot_config): > check_call('mkdir -p %s' % data_dir, shell=True) > check_call('mkdir -p %s' % install_dir, shell=True) > > + capsule_auth_enabled = u_boot_config.buildconfig.get( > + 'config_efi_capsule_authenticate') > + if capsule_auth_enabled: > + # Create private key (SIGNER.key) and certificate (SIGNER.crt) > + check_call('cd %s; ' > + 'openssl req -x509 -sha256 -newkey rsa:2048 ' > + '-subj /CN=TEST_SIGNER/ -keyout SIGNER.key ' > + '-out SIGNER.crt -nodes -days 365' > + % data_dir, shell=True) > + check_call('cd %s; %scert-to-efi-sig-list SIGNER.crt SIGNER.esl' > + % (data_dir, EFITOOLS_PATH), shell=True) > + > + # Update dtb adding capsule certificate > + check_call('cd %s; ' > + 'cp %s/test/py/tests/test_efi_capsule/signature.dts .' > + % (data_dir, u_boot_config.source_dir), shell=True) > + check_call('cd %s; ' > + 'dtc -@ -I dts -O dtb -o signature.dtbo signature.dts; ' > + 'fdtoverlay -i %s/arch/sandbox/dts/test.dtb ' > + '-o test_sig.dtb signature.dtbo' > + % (data_dir, u_boot_config.build_dir), shell=True) > + > + # Create *malicious* private key (SIGNER2.key) and certificate > + # (SIGNER2.crt) > + check_call('cd %s; ' > + 'openssl req -x509 -sha256 -newkey rsa:2048 ' > + '-subj /CN=TEST_SIGNER/ -keyout SIGNER2.key ' > + '-out SIGNER2.crt -nodes -days 365' > + % data_dir, shell=True) > + > # Create capsule files > # two regions: one for u-boot.bin and the other for u-boot.env > check_call('cd %s; echo -n u-boot:Old > u-boot.bin.old; echo -n u-boot:New > u-boot.bin.new; echo -n u-boot-env:Old -> u-boot.env.old; echo -n u-boot-env:New > u-boot.env.new' % data_dir, > @@ -56,6 +86,22 @@ def efi_capsule_data(request, u_boot_config): > check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --index 1 Test02' % > (data_dir, u_boot_config.build_dir), > shell=True) > + if capsule_auth_enabled: > + # firmware signed with proper key > + check_call('cd %s; ' > + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' > + '--private-key SIGNER.key --certificate SIGNER.crt ' > + '--raw u-boot.bin.new Test11' > + % (data_dir, u_boot_config.build_dir), > + shell=True) > + # firmware signed with *mal* key > + check_call('cd %s; ' > + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' > + '--private-key SIGNER2.key ' > + '--certificate SIGNER2.crt ' > + '--raw u-boot.bin.new Test12' > + % (data_dir, u_boot_config.build_dir), > + shell=True) > > # Create a disk image with EFI system partition > check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' % > diff --git a/test/py/tests/test_efi_capsule/signature.dts b/test/py/tests/test_efi_capsule/signature.dts > new file mode 100644 > index 000000000000..078cfc76c93c > --- /dev/null > +++ b/test/py/tests/test_efi_capsule/signature.dts > @@ -0,0 +1,10 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +/dts-v1/; > +/plugin/; > + > +&{/} { > + signature { > + capsule-key = /incbin/("SIGNER.esl"); > + }; > +}; > diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > new file mode 100644 > index 000000000000..593b032e9015 > --- /dev/null > +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > @@ -0,0 +1,254 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# Copyright (c) 2021, Linaro Limited > +# Author: AKASHI Takahiro <takahiro.akashi@linaro.org> > +# > +# U-Boot UEFI: Firmware Update (Signed capsule) Test > + > +""" > +This test verifies capsule-on-disk firmware update > +with signed capsule files > +""" > + > +import pytest > +from capsule_defs import CAPSULE_DATA_DIR, CAPSULE_INSTALL_DIR > + > +@pytest.mark.boardspec('sandbox') > +@pytest.mark.buildconfigspec('efi_capsule_firmware_raw') > +@pytest.mark.buildconfigspec('efi_capsule_authenticate') > +@pytest.mark.buildconfigspec('dfu') > +@pytest.mark.buildconfigspec('dfu_sf') > +@pytest.mark.buildconfigspec('cmd_efidebug') > +@pytest.mark.buildconfigspec('cmd_fat') > +@pytest.mark.buildconfigspec('cmd_memory') > +@pytest.mark.buildconfigspec('cmd_nvedit_efi') > +@pytest.mark.buildconfigspec('cmd_sf') > +@pytest.mark.slow > +class TestEfiCapsuleFirmwareSigned(object): > + def test_efi_capsule_auth1( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 1 - Update U-Boot on SPI Flash, raw image format > + 0x100000-0x150000: U-Boot binary (but dummy) > + > + If the capsule is properly signed, the authentication > + should pass and the firmware be updated. > + """ > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 1-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'env save']) > + > + # initialize content > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > + % CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10']) > + assert 'Old' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test11' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test11 $filesize' > + % CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test11' in ''.join(output) > + > + # reboot > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > + + '/test_sig.dtb' > + u_boot_console.restart_uboot() > + > + capsule_early = u_boot_config.buildconfig.get( > + 'config_efi_capsule_on_disk_early') > + with u_boot_console.log.section('Test Case 1-b, after reboot'): > + if not capsule_early: > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test11' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'env print -e Capsule0000') > + > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test11' not in ''.join(output) > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot:New' in ''.join(output) > + > + def test_efi_capsule_auth2( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 2 - Update U-Boot on SPI Flash, raw image format > + 0x100000-0x150000: U-Boot binary (but dummy) > + > + If the capsule is signed but with an invalid key, > + the authentication should fail and the firmware > + not be updated. > + """ > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 2-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'env save']) > + > + # initialize content > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > + % CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10']) > + assert 'Old' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test12' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test12 $filesize' > + % CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test12' in ''.join(output) > + > + # reboot > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > + + '/test_sig.dtb' > + u_boot_console.restart_uboot() > + > + capsule_early = u_boot_config.buildconfig.get( > + 'config_efi_capsule_on_disk_early') > + with u_boot_console.log.section('Test Case 2-b, after reboot'): > + if not capsule_early: > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test12' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'env print -e Capsule0000') > + > + # deleted any way > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test12' not in ''.join(output) > + > + # TODO: check CapsuleStatus in CapsuleXXXX > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot:Old' in ''.join(output) > + > + def test_efi_capsule_auth3( > + self, u_boot_config, u_boot_console, efi_capsule_data): > + """ > + Test Case 3 - Update U-Boot on SPI Flash, raw image format > + 0x100000-0x150000: U-Boot binary (but dummy) > + > + If the capsule is not signed, the authentication > + should fail and the firmware not be updated. > + """ > + disk_img = efi_capsule_data > + with u_boot_console.log.section('Test Case 3-a, before reboot'): > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > + 'efidebug boot order 1', > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'env save']) > + > + # initialize content > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > + % CAPSULE_DATA_DIR, > + 'sf write 4000000 100000 10', > + 'sf read 5000000 100000 10', > + 'md.b 5000000 10']) > + assert 'Old' in ''.join(output) > + > + # place a capsule file > + output = u_boot_console.run_command_list([ > + 'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR, > + 'fatwrite host 0:1 4000000 %s/Test02 $filesize' > + % CAPSULE_INSTALL_DIR, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test02' in ''.join(output) > + > + # reboot > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > + + '/test_sig.dtb' > + u_boot_console.restart_uboot() > + > + capsule_early = u_boot_config.buildconfig.get( > + 'config_efi_capsule_on_disk_early') > + with u_boot_console.log.section('Test Case 3-b, after reboot'): > + if not capsule_early: > + # make sure that dfu_alt_info exists even persistent variables > + # are not available. > + output = u_boot_console.run_command_list([ > + 'env set dfu_alt_info ' > + '"sf 0:0=u-boot-bin raw 0x100000 ' > + '0x50000;u-boot-env raw 0x150000 0x200000"', > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test02' in ''.join(output) > + > + # need to run uefi command to initiate capsule handling > + output = u_boot_console.run_command( > + 'env print -e Capsule0000') > + > + # deleted any way > + output = u_boot_console.run_command_list([ > + 'host bind 0 %s' % disk_img, > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > + assert 'Test02' not in ''.join(output) > + > + # TODO: check CapsuleStatus in CapsuleXXXX > + > + output = u_boot_console.run_command_list([ > + 'sf probe 0:0', > + 'sf read 4000000 100000 10', > + 'md.b 4000000 10']) > + assert 'u-boot:Old' in ''.join(output)
Heinrich, On Fri, Feb 11, 2022 at 08:25:15PM +0100, Heinrich Schuchardt wrote: > On 2/9/22 11:10, AKASHI Takahiro wrote: > > Add a couple of test cases against capsule image authentication > > for capsule-on-disk, where only a signed capsule file with the verified > > signature will be applied to the system. > > > > Due to the difficulty of embedding a public key (esl file) in U-Boot > > binary during pytest setup time, all the keys/certificates are pre-created. > > > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > > Reviewed-by: Simon Glass <sjg@chromium.org> > > Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> > > The test is not executed on Gitlab: > > test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py sss > > SKIPPED [3] /builds/u-boot/custodians/u-boot-efi/test/py/conftest.py:490: > .config feature "efi_capsule_authenticate" not enabled > > Please, provide a defconfig with CONFIG_EFI_CAPSULE_AUTHENTICATE=y in a > follow-up patch. This is somehow intentional. I don't remember quite well, but when I tried to add another defconfig file for sandbox to initiate some test in the past, you or Simon (sorry if I remember incorrectly here) opposed it. Please also note that adding CONFIG_EFI_CAPSULE_AUTHENTICATE to sandbox_defconfig doesn't make sense as it makes non-signed capsule tests (test_capsule_firmware.py) meaningless. -Takahiro Akashi > Best regards > > Heinrich > > > > --- > > .../py/tests/test_efi_capsule/capsule_defs.py | 5 + > > test/py/tests/test_efi_capsule/conftest.py | 52 +++- > > test/py/tests/test_efi_capsule/signature.dts | 10 + > > .../test_capsule_firmware_signed.py | 254 ++++++++++++++++++ > > 4 files changed, 318 insertions(+), 3 deletions(-) > > create mode 100644 test/py/tests/test_efi_capsule/signature.dts > > create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > > > > diff --git a/test/py/tests/test_efi_capsule/capsule_defs.py b/test/py/tests/test_efi_capsule/capsule_defs.py > > index 4fd6353c2040..59b40f11bd1d 100644 > > --- a/test/py/tests/test_efi_capsule/capsule_defs.py > > +++ b/test/py/tests/test_efi_capsule/capsule_defs.py > > @@ -3,3 +3,8 @@ > > # Directories > > CAPSULE_DATA_DIR = '/EFI/CapsuleTestData' > > CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule' > > + > > +# v1.5.1 or earlier of efitools has a bug in sha256 calculation, and > > +# you need build a newer version on your own. > > +# The path must terminate with '/' if it is not null. > > +EFITOOLS_PATH = '' > > diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py > > index 6ad5608cd71c..27c05971ca32 100644 > > --- a/test/py/tests/test_efi_capsule/conftest.py > > +++ b/test/py/tests/test_efi_capsule/conftest.py > > @@ -10,13 +10,13 @@ import pytest > > from capsule_defs import * > > > > # > > -# Fixture for UEFI secure boot test > > +# Fixture for UEFI capsule test > > # > > > > - > > @pytest.fixture(scope='session') > > def efi_capsule_data(request, u_boot_config): > > - """Set up a file system to be used in UEFI capsule test. > > + """Set up a file system to be used in UEFI capsule and > > + authentication test. > > > > Args: > > request: Pytest request object. > > @@ -40,6 +40,36 @@ def efi_capsule_data(request, u_boot_config): > > check_call('mkdir -p %s' % data_dir, shell=True) > > check_call('mkdir -p %s' % install_dir, shell=True) > > > > + capsule_auth_enabled = u_boot_config.buildconfig.get( > > + 'config_efi_capsule_authenticate') > > + if capsule_auth_enabled: > > + # Create private key (SIGNER.key) and certificate (SIGNER.crt) > > + check_call('cd %s; ' > > + 'openssl req -x509 -sha256 -newkey rsa:2048 ' > > + '-subj /CN=TEST_SIGNER/ -keyout SIGNER.key ' > > + '-out SIGNER.crt -nodes -days 365' > > + % data_dir, shell=True) > > + check_call('cd %s; %scert-to-efi-sig-list SIGNER.crt SIGNER.esl' > > + % (data_dir, EFITOOLS_PATH), shell=True) > > + > > + # Update dtb adding capsule certificate > > + check_call('cd %s; ' > > + 'cp %s/test/py/tests/test_efi_capsule/signature.dts .' > > + % (data_dir, u_boot_config.source_dir), shell=True) > > + check_call('cd %s; ' > > + 'dtc -@ -I dts -O dtb -o signature.dtbo signature.dts; ' > > + 'fdtoverlay -i %s/arch/sandbox/dts/test.dtb ' > > + '-o test_sig.dtb signature.dtbo' > > + % (data_dir, u_boot_config.build_dir), shell=True) > > + > > + # Create *malicious* private key (SIGNER2.key) and certificate > > + # (SIGNER2.crt) > > + check_call('cd %s; ' > > + 'openssl req -x509 -sha256 -newkey rsa:2048 ' > > + '-subj /CN=TEST_SIGNER/ -keyout SIGNER2.key ' > > + '-out SIGNER2.crt -nodes -days 365' > > + % data_dir, shell=True) > > + > > # Create capsule files > > # two regions: one for u-boot.bin and the other for u-boot.env > > check_call('cd %s; echo -n u-boot:Old > u-boot.bin.old; echo -n u-boot:New > u-boot.bin.new; echo -n u-boot-env:Old -> u-boot.env.old; echo -n u-boot-env:New > u-boot.env.new' % data_dir, > > @@ -56,6 +86,22 @@ def efi_capsule_data(request, u_boot_config): > > check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --index 1 Test02' % > > (data_dir, u_boot_config.build_dir), > > shell=True) > > + if capsule_auth_enabled: > > + # firmware signed with proper key > > + check_call('cd %s; ' > > + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' > > + '--private-key SIGNER.key --certificate SIGNER.crt ' > > + '--raw u-boot.bin.new Test11' > > + % (data_dir, u_boot_config.build_dir), > > + shell=True) > > + # firmware signed with *mal* key > > + check_call('cd %s; ' > > + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' > > + '--private-key SIGNER2.key ' > > + '--certificate SIGNER2.crt ' > > + '--raw u-boot.bin.new Test12' > > + % (data_dir, u_boot_config.build_dir), > > + shell=True) > > > > # Create a disk image with EFI system partition > > check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' % > > diff --git a/test/py/tests/test_efi_capsule/signature.dts b/test/py/tests/test_efi_capsule/signature.dts > > new file mode 100644 > > index 000000000000..078cfc76c93c > > --- /dev/null > > +++ b/test/py/tests/test_efi_capsule/signature.dts > > @@ -0,0 +1,10 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > + > > +/dts-v1/; > > +/plugin/; > > + > > +&{/} { > > + signature { > > + capsule-key = /incbin/("SIGNER.esl"); > > + }; > > +}; > > diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > > new file mode 100644 > > index 000000000000..593b032e9015 > > --- /dev/null > > +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py > > @@ -0,0 +1,254 @@ > > +# SPDX-License-Identifier: GPL-2.0+ > > +# Copyright (c) 2021, Linaro Limited > > +# Author: AKASHI Takahiro <takahiro.akashi@linaro.org> > > +# > > +# U-Boot UEFI: Firmware Update (Signed capsule) Test > > + > > +""" > > +This test verifies capsule-on-disk firmware update > > +with signed capsule files > > +""" > > + > > +import pytest > > +from capsule_defs import CAPSULE_DATA_DIR, CAPSULE_INSTALL_DIR > > + > > +@pytest.mark.boardspec('sandbox') > > +@pytest.mark.buildconfigspec('efi_capsule_firmware_raw') > > +@pytest.mark.buildconfigspec('efi_capsule_authenticate') > > +@pytest.mark.buildconfigspec('dfu') > > +@pytest.mark.buildconfigspec('dfu_sf') > > +@pytest.mark.buildconfigspec('cmd_efidebug') > > +@pytest.mark.buildconfigspec('cmd_fat') > > +@pytest.mark.buildconfigspec('cmd_memory') > > +@pytest.mark.buildconfigspec('cmd_nvedit_efi') > > +@pytest.mark.buildconfigspec('cmd_sf') > > +@pytest.mark.slow > > +class TestEfiCapsuleFirmwareSigned(object): > > + def test_efi_capsule_auth1( > > + self, u_boot_config, u_boot_console, efi_capsule_data): > > + """ > > + Test Case 1 - Update U-Boot on SPI Flash, raw image format > > + 0x100000-0x150000: U-Boot binary (but dummy) > > + > > + If the capsule is properly signed, the authentication > > + should pass and the firmware be updated. > > + """ > > + disk_img = efi_capsule_data > > + with u_boot_console.log.section('Test Case 1-a, before reboot'): > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > > + 'efidebug boot order 1', > > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'env save']) > > + > > + # initialize content > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > > + % CAPSULE_DATA_DIR, > > + 'sf write 4000000 100000 10', > > + 'sf read 5000000 100000 10', > > + 'md.b 5000000 10']) > > + assert 'Old' in ''.join(output) > > + > > + # place a capsule file > > + output = u_boot_console.run_command_list([ > > + 'fatload host 0:1 4000000 %s/Test11' % CAPSULE_DATA_DIR, > > + 'fatwrite host 0:1 4000000 %s/Test11 $filesize' > > + % CAPSULE_INSTALL_DIR, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test11' in ''.join(output) > > + > > + # reboot > > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > > + + '/test_sig.dtb' > > + u_boot_console.restart_uboot() > > + > > + capsule_early = u_boot_config.buildconfig.get( > > + 'config_efi_capsule_on_disk_early') > > + with u_boot_console.log.section('Test Case 1-b, after reboot'): > > + if not capsule_early: > > + # make sure that dfu_alt_info exists even persistent variables > > + # are not available. > > + output = u_boot_console.run_command_list([ > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test11' in ''.join(output) > > + > > + # need to run uefi command to initiate capsule handling > > + output = u_boot_console.run_command( > > + 'env print -e Capsule0000') > > + > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test11' not in ''.join(output) > > + > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'sf read 4000000 100000 10', > > + 'md.b 4000000 10']) > > + assert 'u-boot:New' in ''.join(output) > > + > > + def test_efi_capsule_auth2( > > + self, u_boot_config, u_boot_console, efi_capsule_data): > > + """ > > + Test Case 2 - Update U-Boot on SPI Flash, raw image format > > + 0x100000-0x150000: U-Boot binary (but dummy) > > + > > + If the capsule is signed but with an invalid key, > > + the authentication should fail and the firmware > > + not be updated. > > + """ > > + disk_img = efi_capsule_data > > + with u_boot_console.log.section('Test Case 2-a, before reboot'): > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > > + 'efidebug boot order 1', > > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'env save']) > > + > > + # initialize content > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > > + % CAPSULE_DATA_DIR, > > + 'sf write 4000000 100000 10', > > + 'sf read 5000000 100000 10', > > + 'md.b 5000000 10']) > > + assert 'Old' in ''.join(output) > > + > > + # place a capsule file > > + output = u_boot_console.run_command_list([ > > + 'fatload host 0:1 4000000 %s/Test12' % CAPSULE_DATA_DIR, > > + 'fatwrite host 0:1 4000000 %s/Test12 $filesize' > > + % CAPSULE_INSTALL_DIR, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test12' in ''.join(output) > > + > > + # reboot > > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > > + + '/test_sig.dtb' > > + u_boot_console.restart_uboot() > > + > > + capsule_early = u_boot_config.buildconfig.get( > > + 'config_efi_capsule_on_disk_early') > > + with u_boot_console.log.section('Test Case 2-b, after reboot'): > > + if not capsule_early: > > + # make sure that dfu_alt_info exists even persistent variables > > + # are not available. > > + output = u_boot_console.run_command_list([ > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test12' in ''.join(output) > > + > > + # need to run uefi command to initiate capsule handling > > + output = u_boot_console.run_command( > > + 'env print -e Capsule0000') > > + > > + # deleted any way > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test12' not in ''.join(output) > > + > > + # TODO: check CapsuleStatus in CapsuleXXXX > > + > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'sf read 4000000 100000 10', > > + 'md.b 4000000 10']) > > + assert 'u-boot:Old' in ''.join(output) > > + > > + def test_efi_capsule_auth3( > > + self, u_boot_config, u_boot_console, efi_capsule_data): > > + """ > > + Test Case 3 - Update U-Boot on SPI Flash, raw image format > > + 0x100000-0x150000: U-Boot binary (but dummy) > > + > > + If the capsule is not signed, the authentication > > + should fail and the firmware not be updated. > > + """ > > + disk_img = efi_capsule_data > > + with u_boot_console.log.section('Test Case 3-a, before reboot'): > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', > > + 'efidebug boot order 1', > > + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'env save']) > > + > > + # initialize content > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'fatload host 0:1 4000000 %s/u-boot.bin.old' > > + % CAPSULE_DATA_DIR, > > + 'sf write 4000000 100000 10', > > + 'sf read 5000000 100000 10', > > + 'md.b 5000000 10']) > > + assert 'Old' in ''.join(output) > > + > > + # place a capsule file > > + output = u_boot_console.run_command_list([ > > + 'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR, > > + 'fatwrite host 0:1 4000000 %s/Test02 $filesize' > > + % CAPSULE_INSTALL_DIR, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test02' in ''.join(output) > > + > > + # reboot > > + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' > > + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ > > + + '/test_sig.dtb' > > + u_boot_console.restart_uboot() > > + > > + capsule_early = u_boot_config.buildconfig.get( > > + 'config_efi_capsule_on_disk_early') > > + with u_boot_console.log.section('Test Case 3-b, after reboot'): > > + if not capsule_early: > > + # make sure that dfu_alt_info exists even persistent variables > > + # are not available. > > + output = u_boot_console.run_command_list([ > > + 'env set dfu_alt_info ' > > + '"sf 0:0=u-boot-bin raw 0x100000 ' > > + '0x50000;u-boot-env raw 0x150000 0x200000"', > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test02' in ''.join(output) > > + > > + # need to run uefi command to initiate capsule handling > > + output = u_boot_console.run_command( > > + 'env print -e Capsule0000') > > + > > + # deleted any way > > + output = u_boot_console.run_command_list([ > > + 'host bind 0 %s' % disk_img, > > + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) > > + assert 'Test02' not in ''.join(output) > > + > > + # TODO: check CapsuleStatus in CapsuleXXXX > > + > > + output = u_boot_console.run_command_list([ > > + 'sf probe 0:0', > > + 'sf read 4000000 100000 10', > > + 'md.b 4000000 10']) > > + assert 'u-boot:Old' in ''.join(output) >
On 2/14/22 01:43, AKASHI Takahiro wrote: > Heinrich, > > On Fri, Feb 11, 2022 at 08:25:15PM +0100, Heinrich Schuchardt wrote: >> On 2/9/22 11:10, AKASHI Takahiro wrote: >>> Add a couple of test cases against capsule image authentication >>> for capsule-on-disk, where only a signed capsule file with the verified >>> signature will be applied to the system. >>> >>> Due to the difficulty of embedding a public key (esl file) in U-Boot >>> binary during pytest setup time, all the keys/certificates are pre-created. >>> >>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> >>> Reviewed-by: Simon Glass <sjg@chromium.org> >>> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> >> >> The test is not executed on Gitlab: >> >> test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py sss >> >> SKIPPED [3] /builds/u-boot/custodians/u-boot-efi/test/py/conftest.py:490: >> .config feature "efi_capsule_authenticate" not enabled >> >> Please, provide a defconfig with CONFIG_EFI_CAPSULE_AUTHENTICATE=y in a >> follow-up patch. > > This is somehow intentional. > I don't remember quite well, but when I tried to add another defconfig file > for sandbox to initiate some test in the past, you or Simon (sorry if I > remember incorrectly here) opposed it. > > Please also note that adding CONFIG_EFI_CAPSULE_AUTHENTICATE to > sandbox_defconfig doesn't make sense as it makes non-signed capsule > tests (test_capsule_firmware.py) meaningless. This function really should be tested in Gitlab. How about adding the setting to sandbox_spl_defconfig? You will have to change test/run line 31 for the test to be run on sandbox_spl. Best regards Heinrich > > -Takahiro Akashi
diff --git a/test/py/tests/test_efi_capsule/capsule_defs.py b/test/py/tests/test_efi_capsule/capsule_defs.py index 4fd6353c2040..59b40f11bd1d 100644 --- a/test/py/tests/test_efi_capsule/capsule_defs.py +++ b/test/py/tests/test_efi_capsule/capsule_defs.py @@ -3,3 +3,8 @@ # Directories CAPSULE_DATA_DIR = '/EFI/CapsuleTestData' CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule' + +# v1.5.1 or earlier of efitools has a bug in sha256 calculation, and +# you need build a newer version on your own. +# The path must terminate with '/' if it is not null. +EFITOOLS_PATH = '' diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py index 6ad5608cd71c..27c05971ca32 100644 --- a/test/py/tests/test_efi_capsule/conftest.py +++ b/test/py/tests/test_efi_capsule/conftest.py @@ -10,13 +10,13 @@ import pytest from capsule_defs import * # -# Fixture for UEFI secure boot test +# Fixture for UEFI capsule test # - @pytest.fixture(scope='session') def efi_capsule_data(request, u_boot_config): - """Set up a file system to be used in UEFI capsule test. + """Set up a file system to be used in UEFI capsule and + authentication test. Args: request: Pytest request object. @@ -40,6 +40,36 @@ def efi_capsule_data(request, u_boot_config): check_call('mkdir -p %s' % data_dir, shell=True) check_call('mkdir -p %s' % install_dir, shell=True) + capsule_auth_enabled = u_boot_config.buildconfig.get( + 'config_efi_capsule_authenticate') + if capsule_auth_enabled: + # Create private key (SIGNER.key) and certificate (SIGNER.crt) + check_call('cd %s; ' + 'openssl req -x509 -sha256 -newkey rsa:2048 ' + '-subj /CN=TEST_SIGNER/ -keyout SIGNER.key ' + '-out SIGNER.crt -nodes -days 365' + % data_dir, shell=True) + check_call('cd %s; %scert-to-efi-sig-list SIGNER.crt SIGNER.esl' + % (data_dir, EFITOOLS_PATH), shell=True) + + # Update dtb adding capsule certificate + check_call('cd %s; ' + 'cp %s/test/py/tests/test_efi_capsule/signature.dts .' + % (data_dir, u_boot_config.source_dir), shell=True) + check_call('cd %s; ' + 'dtc -@ -I dts -O dtb -o signature.dtbo signature.dts; ' + 'fdtoverlay -i %s/arch/sandbox/dts/test.dtb ' + '-o test_sig.dtb signature.dtbo' + % (data_dir, u_boot_config.build_dir), shell=True) + + # Create *malicious* private key (SIGNER2.key) and certificate + # (SIGNER2.crt) + check_call('cd %s; ' + 'openssl req -x509 -sha256 -newkey rsa:2048 ' + '-subj /CN=TEST_SIGNER/ -keyout SIGNER2.key ' + '-out SIGNER2.crt -nodes -days 365' + % data_dir, shell=True) + # Create capsule files # two regions: one for u-boot.bin and the other for u-boot.env check_call('cd %s; echo -n u-boot:Old > u-boot.bin.old; echo -n u-boot:New > u-boot.bin.new; echo -n u-boot-env:Old -> u-boot.env.old; echo -n u-boot-env:New > u-boot.env.new' % data_dir, @@ -56,6 +86,22 @@ def efi_capsule_data(request, u_boot_config): check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --index 1 Test02' % (data_dir, u_boot_config.build_dir), shell=True) + if capsule_auth_enabled: + # firmware signed with proper key + check_call('cd %s; ' + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' + '--private-key SIGNER.key --certificate SIGNER.crt ' + '--raw u-boot.bin.new Test11' + % (data_dir, u_boot_config.build_dir), + shell=True) + # firmware signed with *mal* key + check_call('cd %s; ' + '%s/tools/mkeficapsule --index 1 --monotonic-count 1 ' + '--private-key SIGNER2.key ' + '--certificate SIGNER2.crt ' + '--raw u-boot.bin.new Test12' + % (data_dir, u_boot_config.build_dir), + shell=True) # Create a disk image with EFI system partition check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' % diff --git a/test/py/tests/test_efi_capsule/signature.dts b/test/py/tests/test_efi_capsule/signature.dts new file mode 100644 index 000000000000..078cfc76c93c --- /dev/null +++ b/test/py/tests/test_efi_capsule/signature.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; +/plugin/; + +&{/} { + signature { + capsule-key = /incbin/("SIGNER.esl"); + }; +}; diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py new file mode 100644 index 000000000000..593b032e9015 --- /dev/null +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware_signed.py @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2021, Linaro Limited +# Author: AKASHI Takahiro <takahiro.akashi@linaro.org> +# +# U-Boot UEFI: Firmware Update (Signed capsule) Test + +""" +This test verifies capsule-on-disk firmware update +with signed capsule files +""" + +import pytest +from capsule_defs import CAPSULE_DATA_DIR, CAPSULE_INSTALL_DIR + +@pytest.mark.boardspec('sandbox') +@pytest.mark.buildconfigspec('efi_capsule_firmware_raw') +@pytest.mark.buildconfigspec('efi_capsule_authenticate') +@pytest.mark.buildconfigspec('dfu') +@pytest.mark.buildconfigspec('dfu_sf') +@pytest.mark.buildconfigspec('cmd_efidebug') +@pytest.mark.buildconfigspec('cmd_fat') +@pytest.mark.buildconfigspec('cmd_memory') +@pytest.mark.buildconfigspec('cmd_nvedit_efi') +@pytest.mark.buildconfigspec('cmd_sf') +@pytest.mark.slow +class TestEfiCapsuleFirmwareSigned(object): + def test_efi_capsule_auth1( + self, u_boot_config, u_boot_console, efi_capsule_data): + """ + Test Case 1 - Update U-Boot on SPI Flash, raw image format + 0x100000-0x150000: U-Boot binary (but dummy) + + If the capsule is properly signed, the authentication + should pass and the firmware be updated. + """ + disk_img = efi_capsule_data + with u_boot_console.log.section('Test Case 1-a, before reboot'): + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', + 'efidebug boot order 1', + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'env save']) + + # initialize content + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'fatload host 0:1 4000000 %s/u-boot.bin.old' + % CAPSULE_DATA_DIR, + 'sf write 4000000 100000 10', + 'sf read 5000000 100000 10', + 'md.b 5000000 10']) + assert 'Old' in ''.join(output) + + # place a capsule file + output = u_boot_console.run_command_list([ + 'fatload host 0:1 4000000 %s/Test11' % CAPSULE_DATA_DIR, + 'fatwrite host 0:1 4000000 %s/Test11 $filesize' + % CAPSULE_INSTALL_DIR, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test11' in ''.join(output) + + # reboot + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ + + '/test_sig.dtb' + u_boot_console.restart_uboot() + + capsule_early = u_boot_config.buildconfig.get( + 'config_efi_capsule_on_disk_early') + with u_boot_console.log.section('Test Case 1-b, after reboot'): + if not capsule_early: + # make sure that dfu_alt_info exists even persistent variables + # are not available. + output = u_boot_console.run_command_list([ + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test11' in ''.join(output) + + # need to run uefi command to initiate capsule handling + output = u_boot_console.run_command( + 'env print -e Capsule0000') + + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test11' not in ''.join(output) + + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'sf read 4000000 100000 10', + 'md.b 4000000 10']) + assert 'u-boot:New' in ''.join(output) + + def test_efi_capsule_auth2( + self, u_boot_config, u_boot_console, efi_capsule_data): + """ + Test Case 2 - Update U-Boot on SPI Flash, raw image format + 0x100000-0x150000: U-Boot binary (but dummy) + + If the capsule is signed but with an invalid key, + the authentication should fail and the firmware + not be updated. + """ + disk_img = efi_capsule_data + with u_boot_console.log.section('Test Case 2-a, before reboot'): + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', + 'efidebug boot order 1', + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'env save']) + + # initialize content + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'fatload host 0:1 4000000 %s/u-boot.bin.old' + % CAPSULE_DATA_DIR, + 'sf write 4000000 100000 10', + 'sf read 5000000 100000 10', + 'md.b 5000000 10']) + assert 'Old' in ''.join(output) + + # place a capsule file + output = u_boot_console.run_command_list([ + 'fatload host 0:1 4000000 %s/Test12' % CAPSULE_DATA_DIR, + 'fatwrite host 0:1 4000000 %s/Test12 $filesize' + % CAPSULE_INSTALL_DIR, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test12' in ''.join(output) + + # reboot + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ + + '/test_sig.dtb' + u_boot_console.restart_uboot() + + capsule_early = u_boot_config.buildconfig.get( + 'config_efi_capsule_on_disk_early') + with u_boot_console.log.section('Test Case 2-b, after reboot'): + if not capsule_early: + # make sure that dfu_alt_info exists even persistent variables + # are not available. + output = u_boot_console.run_command_list([ + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test12' in ''.join(output) + + # need to run uefi command to initiate capsule handling + output = u_boot_console.run_command( + 'env print -e Capsule0000') + + # deleted any way + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test12' not in ''.join(output) + + # TODO: check CapsuleStatus in CapsuleXXXX + + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'sf read 4000000 100000 10', + 'md.b 4000000 10']) + assert 'u-boot:Old' in ''.join(output) + + def test_efi_capsule_auth3( + self, u_boot_config, u_boot_console, efi_capsule_data): + """ + Test Case 3 - Update U-Boot on SPI Flash, raw image format + 0x100000-0x150000: U-Boot binary (but dummy) + + If the capsule is not signed, the authentication + should fail and the firmware not be updated. + """ + disk_img = efi_capsule_data + with u_boot_console.log.section('Test Case 3-a, before reboot'): + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'efidebug boot add -b 1 TEST host 0:1 /helloworld.efi', + 'efidebug boot order 1', + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004', + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'env save']) + + # initialize content + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'fatload host 0:1 4000000 %s/u-boot.bin.old' + % CAPSULE_DATA_DIR, + 'sf write 4000000 100000 10', + 'sf read 5000000 100000 10', + 'md.b 5000000 10']) + assert 'Old' in ''.join(output) + + # place a capsule file + output = u_boot_console.run_command_list([ + 'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR, + 'fatwrite host 0:1 4000000 %s/Test02 $filesize' + % CAPSULE_INSTALL_DIR, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test02' in ''.join(output) + + # reboot + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule' + u_boot_console.config.dtb = mnt_point + CAPSULE_DATA_DIR \ + + '/test_sig.dtb' + u_boot_console.restart_uboot() + + capsule_early = u_boot_config.buildconfig.get( + 'config_efi_capsule_on_disk_early') + with u_boot_console.log.section('Test Case 3-b, after reboot'): + if not capsule_early: + # make sure that dfu_alt_info exists even persistent variables + # are not available. + output = u_boot_console.run_command_list([ + 'env set dfu_alt_info ' + '"sf 0:0=u-boot-bin raw 0x100000 ' + '0x50000;u-boot-env raw 0x150000 0x200000"', + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test02' in ''.join(output) + + # need to run uefi command to initiate capsule handling + output = u_boot_console.run_command( + 'env print -e Capsule0000') + + # deleted any way + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % disk_img, + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR]) + assert 'Test02' not in ''.join(output) + + # TODO: check CapsuleStatus in CapsuleXXXX + + output = u_boot_console.run_command_list([ + 'sf probe 0:0', + 'sf read 4000000 100000 10', + 'md.b 4000000 10']) + assert 'u-boot:Old' in ''.join(output)