diff mbox series

[6/7] sunxi: boards: Enable SPI flash support in U-Boot proper

Message ID 20220111124607.863952-7-andre.przywara@arm.com
State Accepted
Commit 280294c5dfe02a11c9080ee51bd85880a23d769b
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series sunxi: Fix U-Boot proper SPI operation | expand

Commit Message

Andre Przywara Jan. 11, 2022, 12:46 p.m. UTC 
Some sunxi boards ship with SPI flash, which allows booting through the
BootROM. We cover this functionality by a separate SPL "mini" driver.
Separately we have a proper DM_SPI driver for U-Boot proper, which
provides access to the SPI flash through the "sf" command. That allows
to update the firmware on the SPI flash, also to store the environment
there.

However only very few boards actually enable support for U-Boot proper,
even though that would work and the SPL part is configured.

Use the cleaned up configuration scheme to enable SPI flash on those
boards which mention a SPI flash in their .dts, or which use the SPL SPI
support.

Out of the box this would enable storing the environment on the SPI
flash, and allows people to read or write the flash from U-Boot, for
instance to update the SPI flash when booted via an SD card.

For this to actually work there must be a "spi0" alias in the DT, which
most boards are missing. But this should be addressed separately.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/orangepi_pc2_defconfig   | 2 ++
 configs/orangepi_r1_defconfig    | 2 ++
 configs/orangepi_win_defconfig   | 1 +
 configs/orangepi_zero2_defconfig | 2 ++
 configs/orangepi_zero_defconfig  | 2 ++
 configs/pine64-lts_defconfig     | 1 +
 configs/pine_h64_defconfig       | 2 ++
 configs/pinecube_defconfig       | 2 ++
 8 files changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index 2eaddcf684..777af8c60e 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -11,9 +11,11 @@  CONFIG_SPL_SPI_SUNXI=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_SY8106A_VOUT1_VOLT=1100
+CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 745451c4bf..4496aa4a45 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -8,6 +8,8 @@  CONFIG_DRAM_CLK=624
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
index 133755291a..3b78ad7e52 100644
--- a/configs/orangepi_win_defconfig
+++ b/configs/orangepi_win_defconfig
@@ -7,6 +7,7 @@  CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MACPWR="PD14"
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SPI=y
diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig
index 22563c864f..54faf6aba2 100644
--- a/configs/orangepi_zero2_defconfig
+++ b/configs/orangepi_zero2_defconfig
@@ -15,5 +15,7 @@  CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index 332cd4739e..2dc69d2994 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -8,6 +8,8 @@  CONFIG_DRAM_CLK=624
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_CONSOLE_MUX=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig
index 75a77acc44..45a9e77e0e 100644
--- a/configs/pine64-lts_defconfig
+++ b/configs/pine64-lts_defconfig
@@ -10,6 +10,7 @@  CONFIG_MMC0_CD_PIN=""
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SPI=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index 1928509dd7..1e730dd9fa 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -11,8 +11,10 @@  CONFIG_USB3_VBUS_PIN="PL5"
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_PHY_SUN50I_USB3=y
+CONFIG_SPI=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index 0c71d59418..e779663a0d 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -12,8 +12,10 @@  CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_NETDEVICES is not set
 CONFIG_AXP209_POWER=y
 CONFIG_AXP_DCDC2_VOLT=1250
 CONFIG_AXP_DCDC3_VOLT=3300
 CONFIG_CONS_INDEX=3
+CONFIG_SPI=y