diff mbox series

[v2,13/16] arm: dts: ls1028a-rdb: disable I2C buses 1 through 7

Message ID 20211207202023.2054282-14-vladimir.oltean@nxp.com
State Superseded
Delegated to: Priyanka Jain
Headers show
Series Sync NXP LS1028A-RDB device trees between U-Boot and Linux | expand

Commit Message

Vladimir Oltean Dec. 7, 2021, 8:20 p.m. UTC 
There is no I2C peripheral on these buses on the reference design board,
and the Linux device tree does not enable them either.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 arch/arm/dts/fsl-ls1028a-rdb.dts | 28 ----------------------------
 1 file changed, 28 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index c5b95e169f5c..10070eab6e61 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -112,34 +112,6 @@ 
 	};
 };
 
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
 &mscc_felix {
 	status = "okay";
 };