diff mbox series

[RFC,14/23] sunxi: Remove options and setup code for I2C2-I2C4

Message ID 20211021045540.31578-15-samuel@sholland.org
State RFC
Delegated to: Andre Przywara
Headers show
Series sunxi: Add and use a pinctrl driver | expand

Commit Message

Samuel Holland Oct. 21, 2021, 4:55 a.m. UTC 
These options are not currently enabled anywhere. Any new users should
use DM clocks and pinctrl.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 arch/arm/include/asm/arch-sunxi/gpio.h |  9 -----
 arch/arm/include/asm/arch-sunxi/i2c.h  | 11 +-----
 arch/arm/mach-sunxi/Kconfig            | 22 ------------
 board/sunxi/board.c                    | 48 --------------------------
 4 files changed, 1 insertion(+), 89 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 2abc826840..7c44302b8b 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -141,8 +141,6 @@  enum sunxi_gpio_number {
 #define SUN4I_GPB_TWI0		2
 #define SUN4I_GPB_TWI1		2
 #define SUN5I_GPB_TWI1		2
-#define SUN4I_GPB_TWI2		2
-#define SUN5I_GPB_TWI2		2
 #define SUN8I_V3S_GPB_TWI0	2
 #define SUN4I_GPB_UART0		2
 #define SUN5I_GPB_UART0		2
@@ -162,9 +160,6 @@  enum sunxi_gpio_number {
 #define SUNXI_GPD_LVDS0		3
 #define SUNXI_GPD_PWM		2
 
-#define SUN8I_GPE_TWI2		3
-#define SUN50I_GPE_TWI2		3
-
 #define SUNXI_GPF_SDC0		2
 #define SUNXI_GPF_UART0		4
 #define SUN8I_GPF_UART0		3
@@ -174,7 +169,6 @@  enum sunxi_gpio_number {
 #define SUN6I_GPG_SDC1		2
 #define SUN8I_GPG_SDC1		2
 #define SUN8I_GPG_UART1		2
-#define SUN6I_GPG_TWI3		2
 #define SUN5I_GPG_UART1		4
 
 #define SUN6I_GPH_PWM		2
@@ -186,15 +180,12 @@  enum sunxi_gpio_number {
 #define SUN6I_GPH_TWI1		2
 #define SUN8I_GPH_TWI1		2
 #define SUN50I_GPH_TWI1		2
-#define SUN6I_GPH_TWI2		2
 #define SUN6I_GPH_UART0		2
 #define SUN9I_GPH_UART0		2
 #define SUN50I_H6_GPH_UART0	2
 #define SUN50I_H616_GPH_UART0	2
 
 #define SUNXI_GPI_SDC3		2
-#define SUN7I_GPI_TWI3		3
-#define SUN7I_GPI_TWI4		3
 
 #define SUN6I_GPL0_R_P2WI_SCK	3
 #define SUN6I_GPL1_R_P2WI_SDA	3
diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
index 1cb2ba6b0a..3525f22e7d 100644
--- a/arch/arm/include/asm/arch-sunxi/i2c.h
+++ b/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -13,17 +13,8 @@ 
 #ifdef CONFIG_I2C1_ENABLE
 #define CONFIG_I2C_MVTWSI_BASE1	SUNXI_TWI1_BASE
 #endif
-#ifdef CONFIG_I2C2_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE2	SUNXI_TWI2_BASE
-#endif
-#ifdef CONFIG_I2C3_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE3	SUNXI_TWI3_BASE
-#endif
-#ifdef CONFIG_I2C4_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE4	SUNXI_TWI4_BASE
-#endif
 #ifdef CONFIG_R_I2C_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
+#define CONFIG_I2C_MVTWSI_BASE2 SUNXI_R_TWI_BASE
 #endif
 
 /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2c18cf02d1..24475a1f69 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -747,20 +747,6 @@  config I2C1_ENABLE
 	---help---
 	See I2C0_ENABLE help text.
 
-config I2C2_ENABLE
-	bool "Enable I2C/TWI controller 2"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-
-if MACH_SUN6I || MACH_SUN7I
-config I2C3_ENABLE
-	bool "Enable I2C/TWI controller 3"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-endif
-
 if SUNXI_GEN_SUN6I || SUN50I_GEN_H6
 config R_I2C_ENABLE
 	bool "Enable the PRCM I2C/TWI controller"
@@ -771,14 +757,6 @@  config R_I2C_ENABLE
 	Set this to y to enable the I2C controller which is part of the PRCM.
 endif
 
-if MACH_SUN7I
-config I2C4_ENABLE
-	bool "Enable I2C/TWI controller 4"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-endif
-
 config AXP_GPIO
 	bool "Enable support for gpio-s on axp PMICs"
 	depends on AXP_PMIC_BUS
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 4f5747c34a..d7e0982557 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -104,54 +104,6 @@  void i2c_init_board(void)
 #endif
 #endif
 
-#ifdef CONFIG_I2C2_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || \
-    defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN5I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN8I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
-	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN50I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(14), SUN50I_GPE_TWI2);
-	sunxi_gpio_set_cfgpin(SUNXI_GPE(15), SUN50I_GPE_TWI2);
-	clock_twi_onoff(2, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C3_ENABLE
-#if defined(CONFIG_MACH_SUN6I)
-	sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
-	sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
-	clock_twi_onoff(3, 1);
-#elif defined(CONFIG_MACH_SUN7I) || \
-      defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
-	clock_twi_onoff(3, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C4_ENABLE
-#if defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I_R40)
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
-	sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
-	clock_twi_onoff(4, 1);
-#endif
-#endif
-
 #ifdef CONFIG_R_I2C_ENABLE
 #ifdef CONFIG_MACH_SUN50I
 	clock_twi_onoff(5, 1);