@@ -467,6 +467,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
+dtb-$(CONFIG_TARGET_STARQLTECHN) += starqltechn.dtb
dtb-$(CONFIG_TARGET_STEMMY) += ste-ux500-samsung-stemmy.dtb
new file mode 100644
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to handle Samsung S9 SM-G9600 (starqltechn) pins
+ *
+ * (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+/
+{
+ soc {
+ u-boot,dm-pre-reloc;
+ gcc {
+ clock-controller@100000 {
+ u-boot,dm-pre-reloc;
+ };
+ serial@0xa84000 {
+ u-boot,dm-pre-reloc;
+ };
+ gpio_north@3900000 {
+ u-boot,dm-pre-reloc;
+ };
+ pinctrl@3900000 {
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+};
+
+&pm8998_pon {
+ key_vol_down {
+ gpios = <&pm8998_pon 1 0>;
+ label = "key_vol_down";
+ };
+ key_power {
+ gpios = <&pm8998_pon 0 0>;
+ label = "key_power";
+ };
+};
new file mode 100644
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Samsung S9 SM-G9600 (starqltechn) board device tree source
+ *
+ * (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "sdm845.dtsi"
+
+/ {
+ model = "Samsung S9 (SM-G9600)";
+ compatible = "qcom,sdm845-mtp", "qcom,sdm845", "qcom,mtp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ aliases {
+ serial0 = &debug_uart;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xfe1bffff>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ serial@0xa84000 {
+ status = "ok";
+ };
+
+ pinctrl@3900000 {
+ muic_i2c: muic_i2c {
+ pins = "GPIO_33", "GPIO_34";
+ drive-strength = <0x2>;
+ function = "gpio";
+ bias-disable;
+ };
+ };
+ };
+};
+
+#include "starqltechn-uboot.dtsi"
@@ -12,6 +12,10 @@ config SPL_SYS_MALLOC_F_LEN
config SDM845
bool "Qualcomm Snapdragon 845 SoC"
default n
+ select LINUX_KERNEL_IMAGE_HEADER
+
+config LNX_KRNL_IMG_TEXT_OFFSET_BASE
+ default 0x80000000
choice
prompt "Snapdragon board select"
@@ -40,9 +44,22 @@ config TARGET_DRAGONBOARD820C
- 3GiB RAM
- 32GiB UFS drive
+config TARGET_STARQLTECHN
+ bool "Samsung S9 SM-G9600(starqltechn)"
+ help
+ Support for Samsung S9 SM-G9600(starqltechn) board.
+ Features:
+ - Qualcomm Snapdragon SDM845 SoC
+ - 4GiB RAM
+ - 64GiB UFS drive
+ select MISC_INIT_R
+ select SDM845
+ select DM_ETH if NET
+
endchoice
source "board/qualcomm/dragonboard410c/Kconfig"
source "board/qualcomm/dragonboard820c/Kconfig"
+source "board/samsung/starqltechn/Kconfig"
endif
new file mode 100644
@@ -0,0 +1,22 @@
+if TARGET_STARQLTECHN
+
+config SYS_BOARD
+ default "starqltechn"
+ help
+ starqltechn is a production board for S9 and S9+ phones(SM-G96x0) phones based on SDM845 SoC.
+
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "sdm845"
+ help
+ This option contains information about board configuration name.
+ Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+ will be used for board configuration.
+
+config SYS_VENDOR
+ default "samsung"
+
+config SYS_CONFIG_NAME
+ default "starqltechn"
+
+endif
new file mode 100644
@@ -0,0 +1,6 @@
+Samsung S9 (SM-G9600)(starqltechn) Board
+M: Dzmitry Sankouski <dsankouski@gmail.com>
+S: Maintained
+F: board/samsung/starqltechn/
+F: include/configs/starqltechn.h
+F: configs/starqltechn_defconfig
new file mode 100644
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
+#
+# This empty file prevents make error.
+# Board logic defined in board/qualcomm/common/sdm845.c, no custom logic for starqltechn so far.
+#
+
+obj-y += starqltechn.o
new file mode 100644
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This empty file prevents make linking error.
+ * No custom logic for starqltechn so far.
+ *
+ * (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+void nooop(void) {}
new file mode 100644
@@ -0,0 +1,30 @@
+CONFIG_TARGET_STARQLTECHN=y
+CONFIG_ARM=y
+CONFIG_ARM_SMCCC=y
+CONFIG_ARCH_SNAPDRAGON=y
+CONFIG_IDENT_STRING="\nSamsung S9 SM-G9600"
+CONFIG_DEFAULT_DEVICE_TREE="starqltechn"
+CONFIG_SYS_TEXT_BASE=0x80000000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_BOARD_EARLY_INIT_F=n
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_DISPLAY_CPUINFO=n
+CONFIG_HUSH_PARSER=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_STDIO=n
+CONFIG_MSM_GPIO=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_PM8916=y
+CONFIG_PM8916_GPIO=y
+CONFIG_SPMI_MSM=y
+CONFIG_CLK=y
+CONFIG_NET=n
+CONFIG_USE_PREBOOT=y
+CONFIG_CMD_GPIO=y
+CONFIG_PINCTRL=y
+CONFIG_MSM_GENI_SERIAL=y
+# CONFIG_DEBUG_UART=y
+# CONFIG_DEBUG_UART_MSM_GENI=y
+# CONFIG_DEBUG_UART_BASE=0xa84000
+# CONFIG_DEBUG_UART_CLOCK=7372800
+# CONFIG_DEBUG_UART_ANNOUNCE=y
@@ -7,3 +7,4 @@ Qualcomm
:maxdepth: 2
dragonboard410c
+ sdm845
new file mode 100644
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. sectionauthor:: Dzmitry Sankouski <dsankouski@gmail.com>
+
+Snapdragon 845
+================
+
+About this
+----------
+This document describes the information about Qualcomm Snapdragon 845
+supported boards and it's usage steps.
+
+SDM845 - hi-end qualcomm chip, introduced in late 2017.
+Mostly used in flagship phones and tablets of 2018.
+
+U-Boot can be used as a replacement for Qualcomm's original ABL (UEFI) bootloader.
+It is loaded as an Android boot image through ABL
+
+Installation
+------------
+First, setup ``CROSS_COMPILE`` for aarch64. Then, build U-Boot for your board::
+
+ $ export CROSS_COMPILE=<aarch64 toolchain prefix>
+ $ make <your board name here, see Boards section>_defconfig
+ $ make
+
+This will build ``u-boot.bin`` in the configured output directory.
+
+Boards
+------------
+starqlte
+^^^^^^^^^^^^
+
+The starqltechn is a production board for Samsung S9 (SM-G9600) phone,
+based on the Qualcomm SDM845 SoC.
+
+More information can be found on the `Samsung S9 page`_.
+
+.. _Samsung S9 page: https://en.wikipedia.org/wiki/Samsung_Galaxy_S9
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> --- Changes for v2: - Create documentation file for SDM845 boards - Add starqltechn board documentation Changes for v3: - fix comment in starqltechn.c Changes for v4: - move configs to Kconfig file - remove starqltechn.h file - set SYS_CONFIG_NAME to default of sdm845 - remove unneeded options from starqltechn_defconfig arch/arm/dts/Makefile | 1 + arch/arm/dts/starqltechn-uboot.dtsi | 39 ++++++++++++++++++ arch/arm/dts/starqltechn.dts | 53 +++++++++++++++++++++++++ arch/arm/mach-snapdragon/Kconfig | 17 ++++++++ board/samsung/starqltechn/Kconfig | 22 ++++++++++ board/samsung/starqltechn/MAINTAINERS | 6 +++ board/samsung/starqltechn/Makefile | 9 +++++ board/samsung/starqltechn/starqltechn.c | 10 +++++ configs/starqltechn_defconfig | 30 ++++++++++++++ doc/board/qualcomm/index.rst | 1 + doc/board/qualcomm/sdm845.rst | 38 ++++++++++++++++++ 11 files changed, 226 insertions(+) create mode 100644 arch/arm/dts/starqltechn-uboot.dtsi create mode 100644 arch/arm/dts/starqltechn.dts create mode 100644 board/samsung/starqltechn/Kconfig create mode 100644 board/samsung/starqltechn/MAINTAINERS create mode 100644 board/samsung/starqltechn/Makefile create mode 100644 board/samsung/starqltechn/starqltechn.c create mode 100644 configs/starqltechn_defconfig create mode 100644 doc/board/qualcomm/sdm845.rst