@@ -13,7 +13,6 @@
#define CONFIG_MCFTMR
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT 0
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTCOMMAND "bootm ffc20000"
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -21,9 +21,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {9600, 19200, 38400, 57600, 115200}
-
#define CONFIG_BOOTCOMMAND "sf probe;" \
"mtdparts default;" \
"bootm 0x9f650000"
@@ -25,8 +25,6 @@
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 25000000
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {9600, 19200, 38400, 57600, 115200}
#define CONFIG_BOOTCOMMAND "sf probe;" \
"mtdparts default;" \
@@ -25,8 +25,6 @@
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 25000000
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {9600, 19200, 38400, 57600, 115200}
#define CONFIG_BOOTCOMMAND "sf probe;" \
"mtdparts default;" \
@@ -32,7 +32,6 @@
/* Serial console */
#define CONFIG_MXC_UART_BASE UART4_BASE
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* Environment */
@@ -45,7 +45,6 @@
/* serial port */
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_CLK_FREQ 100000000
#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4)
@@ -59,8 +59,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#define CONFIG_SYS_HZ 1000
#define CONFIG_HWCONFIG
@@ -45,8 +45,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* Miscellaneous configurable options */
/* Physical Memory Map */
@@ -54,8 +54,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
@@ -54,8 +54,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
@@ -63,8 +63,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
/* IFC */
#define CONFIG_FSL_IFC
@@ -74,8 +74,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* IFC */
#define CONFIG_FSL_IFC
@@ -67,7 +67,6 @@
(void *)CONFIG_SYS_SERIAL1, \
(void *)CONFIG_SYS_SERIAL2, \
(void *)CONFIG_SYS_SERIAL3 }
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* MC firmware */
#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
@@ -24,9 +24,6 @@
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_CBSIZE 1024
-/* Serial common */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
/* SPL */
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
@@ -113,7 +113,6 @@
(void *)PHY_BASEADDR_UART1, \
(void *)PHY_BASEADDR_UART2, \
(void *)PHY_BASEADDR_UART3}
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*-----------------------------------------------------------------------
* PLL
@@ -12,7 +12,6 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT 0
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define LDS_BOARD_TEXT \
board/sysam/stmark2/sbf_dram_init.o (.text*)
@@ -49,8 +49,6 @@
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024))
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
-#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 128
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -25,8 +25,6 @@
* Serial Port
*/
#define CONFIG_SYS_NS16550_CLK 40000000
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {9600, 19200, 38400, 57600, 115200}
#define CONFIG_BOOTCOMMAND \
"dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr"
@@ -123,7 +123,6 @@
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
@@ -170,7 +170,6 @@
/* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*======================*/
/* Ethernet Driver Info */
A number of platforms are still defining CONFIG_SYS_BAUDRATE_TABLE to the fallback default of "{ 9600, 19200, 38400, 57600, 115200 }", but with varying whitespace, or were introduced after the default fallback was added. Use the default table here. Signed-off-by: Tom Rini <trini@konsulko.com> --- include/configs/amcore.h | 1 - include/configs/ap121.h | 3 --- include/configs/ap143.h | 2 -- include/configs/ap152.h | 2 -- include/configs/cm_fx6.h | 1 - include/configs/kontron_sl28.h | 1 - include/configs/ls1012a_common.h | 2 -- include/configs/ls1028a_common.h | 2 -- include/configs/ls1043a_common.h | 2 -- include/configs/ls1046a_common.h | 2 -- include/configs/ls1088a_common.h | 2 -- include/configs/ls2080a_common.h | 2 -- include/configs/lx2160a_common.h | 1 - include/configs/mt7620.h | 3 --- include/configs/s5p4418_nanopi2.h | 1 - include/configs/stmark2.h | 1 - include/configs/synquacer.h | 2 -- include/configs/tplink_wdr4300.h | 2 -- include/configs/vexpress_common.h | 1 - include/configs/xtfpga.h | 1 - 20 files changed, 34 deletions(-)