@@ -812,13 +812,6 @@ config ARCH_MX23
select PL011_SERIAL
select SUPPORT_SPL
-config ARCH_MX25
- bool "NXP MX25"
- select CPU_ARM926EJS
- select GPIO_EXTRA_HEADER
- select MACH_IMX
- imply MXC_GPIO
-
config ARCH_MX28
bool "NXP i.MX28 family"
select CPU_ARM926EJS
@@ -2015,8 +2008,6 @@ source "arch/arm/mach-octeontx2/Kconfig"
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
-source "arch/arm/mach-imx/mx2/Kconfig"
-
source "arch/arm/mach-imx/mx3/Kconfig"
source "arch/arm/mach-imx/mx5/Kconfig"
deleted file mode 100644
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *
- * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
- *
- * Modified for mx25 by John Rigby <jrigby@gmail.com>
- */
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H
-
-#ifdef CONFIG_MX25_HCLK_FREQ
-#define MXC_HCLK CONFIG_MX25_HCLK_FREQ
-#else
-#define MXC_HCLK 24000000
-#endif
-
-#ifdef CONFIG_MX25_CLK32
-#define MXC_CLK32 CONFIG_MX25_CLK32
-#else
-#define MXC_CLK32 32768
-#endif
-
-enum mxc_clock {
- /* PER clocks (do not change order) */
- MXC_CSI_CLK,
- MXC_EPIT_CLK,
- MXC_ESAI_CLK,
- MXC_ESDHC1_CLK,
- MXC_ESDHC2_CLK,
- MXC_GPT_CLK,
- MXC_I2C_CLK,
- MXC_LCDC_CLK,
- MXC_NFC_CLK,
- MXC_OWIRE_CLK,
- MXC_PWM_CLK,
- MXC_SIM1_CLK,
- MXC_SIM2_CLK,
- MXC_SSI1_CLK,
- MXC_SSI2_CLK,
- MXC_UART_CLK,
- /* Other clocks */
- MXC_ARM_CLK,
- MXC_AHB_CLK,
- MXC_IPG_CLK,
- MXC_CSPI_CLK,
- MXC_FEC_CLK,
- MXC_CLK_NUM
-};
-
-int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq);
-unsigned int mxc_get_clock(enum mxc_clock clk);
-
-#define imx_get_uartclk() mxc_get_clock(MXC_UART_CLK)
-#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
-
-#endif /* __ASM_ARCH_CLOCK_H */
deleted file mode 100644
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- */
-
-
-#ifndef __ASM_ARCH_MX25_GPIO_H
-#define __ASM_ARCH_MX25_GPIO_H
-
-#include <asm/mach-imx/gpio.h>
-
-#endif
deleted file mode 100644
@@ -1,504 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009, DENX Software Engineering
- * Author: John Rigby <jcrigby@gmail.com
- *
- * Based on arch-mx31/imx-regs.h
- * Copyright (C) 2009 Ilya Yanok,
- * Emcraft Systems <yanok@emcraft.com>
- * and arch-mx27/imx-regs.h
- * Copyright (C) 2007 Pengutronix,
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2009 Ilya Yanok,
- * Emcraft Systems <yanok@emcraft.com>
- */
-
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-
-#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
-#include <asm/types.h>
-
-/* Clock Control Module (CCM) registers */
-struct ccm_regs {
- u32 mpctl; /* Core PLL Control */
- u32 upctl; /* USB PLL Control */
- u32 cctl; /* Clock Control */
- u32 cgr0; /* Clock Gating Control 0 */
- u32 cgr1; /* Clock Gating Control 1 */
- u32 cgr2; /* Clock Gating Control 2 */
- u32 pcdr[4]; /* PER Clock Dividers */
- u32 rcsr; /* CCM Status */
- u32 crdr; /* CCM Reset and Debug */
- u32 dcvr0; /* DPTC Comparator Value 0 */
- u32 dcvr1; /* DPTC Comparator Value 1 */
- u32 dcvr2; /* DPTC Comparator Value 2 */
- u32 dcvr3; /* DPTC Comparator Value 3 */
- u32 ltr0; /* Load Tracking 0 */
- u32 ltr1; /* Load Tracking 1 */
- u32 ltr2; /* Load Tracking 2 */
- u32 ltr3; /* Load Tracking 3 */
- u32 ltbr0; /* Load Tracking Buffer 0 */
- u32 ltbr1; /* Load Tracking Buffer 1 */
- u32 pcmr0; /* Power Management Control 0 */
- u32 pcmr1; /* Power Management Control 1 */
- u32 pcmr2; /* Power Management Control 2 */
- u32 mcr; /* Miscellaneous Control */
- u32 lpimr0; /* Low Power Interrupt Mask 0 */
- u32 lpimr1; /* Low Power Interrupt Mask 1 */
-};
-
-/* Enhanced SDRAM Controller (ESDRAMC) registers */
-struct esdramc_regs {
- u32 ctl0; /* control 0 */
- u32 cfg0; /* configuration 0 */
- u32 ctl1; /* control 1 */
- u32 cfg1; /* configuration 1 */
- u32 misc; /* miscellaneous */
- u32 pad[3];
- u32 cdly1; /* Delay Line 1 configuration debug */
- u32 cdly2; /* delay line 2 configuration debug */
- u32 cdly3; /* delay line 3 configuration debug */
- u32 cdly4; /* delay line 4 configuration debug */
- u32 cdly5; /* delay line 5 configuration debug */
- u32 cdlyl; /* delay line cycle length debug */
-};
-
-/* General Purpose Timer (GPT) registers */
-struct gpt_regs {
- u32 ctrl; /* control */
- u32 pre; /* prescaler */
- u32 stat; /* status */
- u32 intr; /* interrupt */
- u32 cmp[3]; /* output compare 1-3 */
- u32 capt[2]; /* input capture 1-2 */
- u32 counter; /* counter */
-};
-
-/* Watchdog Timer (WDOG) registers */
-struct wdog_regs {
- u16 wcr; /* Control */
- u16 wsr; /* Service */
- u16 wrsr; /* Reset Status */
- u16 wicr; /* Interrupt Control */
- u16 wmcr; /* Misc Control */
-};
-
-/* IIM control registers */
-struct iim_regs {
- u32 iim_stat;
- u32 iim_statm;
- u32 iim_err;
- u32 iim_emask;
- u32 iim_fctl;
- u32 iim_ua;
- u32 iim_la;
- u32 iim_sdat;
- u32 iim_prev;
- u32 iim_srev;
- u32 iim_prg_p;
- u32 iim_scs0;
- u32 iim_scs1;
- u32 iim_scs2;
- u32 iim_scs3;
- u32 res1[0x1f1];
- struct fuse_bank {
- u32 fuse_regs[0x20];
- u32 fuse_rsvd[0xe0];
- } bank[3];
-};
-
-struct fuse_bank0_regs {
- u32 fuse0_7[8];
- u32 uid[8];
- u32 fuse16_25[0xa];
- u32 mac_addr[6];
-};
-
-struct fuse_bank1_regs {
- u32 fuse0_21[0x16];
- u32 usr5;
- u32 fuse23_29[7];
- u32 usr6[2];
-};
-
-/* Multi-Layer AHB Crossbar Switch (MAX) registers */
-struct max_regs {
- u32 mpr0;
- u32 pad00[3];
- u32 sgpcr0;
- u32 pad01[59];
- u32 mpr1;
- u32 pad02[3];
- u32 sgpcr1;
- u32 pad03[59];
- u32 mpr2;
- u32 pad04[3];
- u32 sgpcr2;
- u32 pad05[59];
- u32 mpr3;
- u32 pad06[3];
- u32 sgpcr3;
- u32 pad07[59];
- u32 mpr4;
- u32 pad08[3];
- u32 sgpcr4;
- u32 pad09[251];
- u32 mgpcr0;
- u32 pad10[63];
- u32 mgpcr1;
- u32 pad11[63];
- u32 mgpcr2;
- u32 pad12[63];
- u32 mgpcr3;
- u32 pad13[63];
- u32 mgpcr4;
-};
-
-/* AHB <-> IP-Bus Interface (AIPS) */
-struct aips_regs {
- u32 mpr_0_7;
- u32 mpr_8_15;
-};
-/* LCD controller registers */
-struct lcdc_regs {
- u32 lssar; /* Screen Start Address */
- u32 lsr; /* Size */
- u32 lvpwr; /* Virtual Page Width */
- u32 lcpr; /* Cursor Position */
- u32 lcwhb; /* Cursor Width Height and Blink */
- u32 lccmr; /* Color Cursor Mapping */
- u32 lpcr; /* Panel Configuration */
- u32 lhcr; /* Horizontal Configuration */
- u32 lvcr; /* Vertical Configuration */
- u32 lpor; /* Panning Offset */
- u32 lscr; /* Sharp Configuration */
- u32 lpccr; /* PWM Contrast Control */
- u32 ldcr; /* DMA Control */
- u32 lrmcr; /* Refresh Mode Control */
- u32 licr; /* Interrupt Configuration */
- u32 lier; /* Interrupt Enable */
- u32 lisr; /* Interrupt Status */
- u32 res0[3];
- u32 lgwsar; /* Graphic Window Start Address */
- u32 lgwsr; /* Graphic Window Size */
- u32 lgwvpwr; /* Graphic Window Virtual Page Width Regist */
- u32 lgwpor; /* Graphic Window Panning Offset */
- u32 lgwpr; /* Graphic Window Position */
- u32 lgwcr; /* Graphic Window Control */
- u32 lgwdcr; /* Graphic Window DMA Control */
- u32 res1[5];
- u32 lauscr; /* AUS Mode Control */
- u32 lausccr; /* AUS mode Cursor Control */
- u32 res2[31 + 64*7];
- u32 bglut; /* Background Lookup Table */
- u32 gwlut; /* Graphic Window Lookup Table */
-};
-
-/* Wireless External Interface Module Registers */
-struct weim_regs {
- u32 cscr0u; /* Chip Select 0 Upper Register */
- u32 cscr0l; /* Chip Select 0 Lower Register */
- u32 cscr0a; /* Chip Select 0 Addition Register */
- u32 pad0;
- u32 cscr1u; /* Chip Select 1 Upper Register */
- u32 cscr1l; /* Chip Select 1 Lower Register */
- u32 cscr1a; /* Chip Select 1 Addition Register */
- u32 pad1;
- u32 cscr2u; /* Chip Select 2 Upper Register */
- u32 cscr2l; /* Chip Select 2 Lower Register */
- u32 cscr2a; /* Chip Select 2 Addition Register */
- u32 pad2;
- u32 cscr3u; /* Chip Select 3 Upper Register */
- u32 cscr3l; /* Chip Select 3 Lower Register */
- u32 cscr3a; /* Chip Select 3 Addition Register */
- u32 pad3;
- u32 cscr4u; /* Chip Select 4 Upper Register */
- u32 cscr4l; /* Chip Select 4 Lower Register */
- u32 cscr4a; /* Chip Select 4 Addition Register */
- u32 pad4;
- u32 cscr5u; /* Chip Select 5 Upper Register */
- u32 cscr5l; /* Chip Select 5 Lower Register */
- u32 cscr5a; /* Chip Select 5 Addition Register */
- u32 pad5;
- u32 wcr; /* WEIM Configuration Register */
-};
-
-/* Multi-Master Memory Interface */
-struct m3if_regs {
- u32 ctl; /* Control Register */
- u32 wcfg0; /* Watermark Configuration Register 0 */
- u32 wcfg1; /* Watermark Configuration Register1 */
- u32 wcfg2; /* Watermark Configuration Register2 */
- u32 wcfg3; /* Watermark Configuration Register 3 */
- u32 wcfg4; /* Watermark Configuration Register 4 */
- u32 wcfg5; /* Watermark Configuration Register 5 */
- u32 wcfg6; /* Watermark Configuration Register 6 */
- u32 wcfg7; /* Watermark Configuration Register 7 */
- u32 wcsr; /* Watermark Control and Status Register */
- u32 scfg0; /* Snooping Configuration Register 0 */
- u32 scfg1; /* Snooping Configuration Register 1 */
- u32 scfg2; /* Snooping Configuration Register 2 */
- u32 ssr0; /* Snooping Status Register 0 */
- u32 ssr1; /* Snooping Status Register 1 */
- u32 res0;
- u32 mlwe0; /* Master Lock WEIM CS0 Register */
- u32 mlwe1; /* Master Lock WEIM CS1 Register */
- u32 mlwe2; /* Master Lock WEIM CS2 Register */
- u32 mlwe3; /* Master Lock WEIM CS3 Register */
- u32 mlwe4; /* Master Lock WEIM CS4 Register */
- u32 mlwe5; /* Master Lock WEIM CS5 Register */
-};
-
-/* Pulse width modulation */
-struct pwm_regs {
- u32 cr; /* Control Register */
- u32 sr; /* Status Register */
- u32 ir; /* Interrupt Register */
- u32 sar; /* Sample Register */
- u32 pr; /* Period Register */
- u32 cnr; /* Counter Register */
-};
-
-/* Enhanced Periodic Interrupt Timer */
-struct epit_regs {
- u32 cr; /* Control register */
- u32 sr; /* Status register */
- u32 lr; /* Load register */
- u32 cmpr; /* Compare register */
- u32 cnr; /* Counter register */
-};
-
-#endif
-
-#define ARCH_MXC
-
-/* AIPS 1 */
-#define IMX_AIPS1_BASE (0x43F00000)
-#define IMX_MAX_BASE (0x43F04000)
-#define IMX_CLKCTL_BASE (0x43F08000)
-#define IMX_ETB_SLOT4_BASE (0x43F0C000)
-#define IMX_ETB_SLOT5_BASE (0x43F10000)
-#define IMX_ECT_CTIO_BASE (0x43F18000)
-#define I2C1_BASE_ADDR (0x43F80000)
-#define I2C3_BASE_ADDR (0x43F84000)
-#define IMX_CAN1_BASE (0x43F88000)
-#define IMX_CAN2_BASE (0x43F8C000)
-#define UART1_BASE (0x43F90000)
-#define UART2_BASE (0x43F94000)
-#define I2C2_BASE_ADDR (0x43F98000)
-#define IMX_OWIRE_BASE (0x43F9C000)
-#define IMX_CSPI1_BASE (0x43FA4000)
-#define IMX_KPP_BASE (0x43FA8000)
-#define IMX_IOPADMUX_BASE (0x43FAC000)
-#define IOMUXC_BASE_ADDR IMX_IOPADMUX_BASE
-#define IMX_IOPADCTL_BASE (0x43FAC22C)
-#define IMX_IOPADGRPCTL_BASE (0x43FAC418)
-#define IMX_IOPADINPUTSEL_BASE (0x43FAC460)
-#define IMX_AUDMUX_BASE (0x43FB0000)
-#define IMX_ECT_IP1_BASE (0x43FB8000)
-#define IMX_ECT_IP2_BASE (0x43FBC000)
-
-/* SPBA */
-#define IMX_SPBA_BASE (0x50000000)
-#define IMX_CSPI3_BASE (0x50004000)
-#define UART4_BASE (0x50008000)
-#define UART3_BASE (0x5000C000)
-#define IMX_CSPI2_BASE (0x50010000)
-#define IMX_SSI2_BASE (0x50014000)
-#define IMX_ESAI_BASE (0x50018000)
-#define IMX_ATA_DMA_BASE (0x50020000)
-#define IMX_SIM1_BASE (0x50024000)
-#define IMX_SIM2_BASE (0x50028000)
-#define UART5_BASE (0x5002C000)
-#define IMX_TSC_BASE (0x50030000)
-#define IMX_SSI1_BASE (0x50034000)
-#define IMX_FEC_BASE (0x50038000)
-#define IMX_SPBA_CTRL_BASE (0x5003C000)
-
-/* AIPS 2 */
-#define IMX_AIPS2_BASE (0x53F00000)
-#define IMX_CCM_BASE (0x53F80000)
-#define IMX_GPT4_BASE (0x53F84000)
-#define IMX_GPT3_BASE (0x53F88000)
-#define IMX_GPT2_BASE (0x53F8C000)
-#define IMX_GPT1_BASE (0x53F90000)
-#define IMX_EPIT1_BASE (0x53F94000)
-#define IMX_EPIT2_BASE (0x53F98000)
-#define IMX_GPIO4_BASE (0x53F9C000)
-#define IMX_PWM2_BASE (0x53FA0000)
-#define IMX_GPIO3_BASE (0x53FA4000)
-#define IMX_PWM3_BASE (0x53FA8000)
-#define IMX_SCC_BASE (0x53FAC000)
-#define IMX_SCM_BASE (0x53FAE000)
-#define IMX_SMN_BASE (0x53FAF000)
-#define IMX_RNGD_BASE (0x53FB0000)
-#define IMX_MMC_SDHC1_BASE (0x53FB4000)
-#define IMX_MMC_SDHC2_BASE (0x53FB8000)
-#define IMX_LCDC_BASE (0x53FBC000)
-#define IMX_SLCDC_BASE (0x53FC0000)
-#define IMX_PWM4_BASE (0x53FC8000)
-#define IMX_GPIO1_BASE (0x53FCC000)
-#define IMX_GPIO2_BASE (0x53FD0000)
-#define IMX_SDMA_BASE (0x53FD4000)
-#define IMX_WDT_BASE (0x53FDC000)
-#define WDOG1_BASE_ADDR IMX_WDT_BASE
-#define IMX_PWM1_BASE (0x53FE0000)
-#define IMX_RTIC_BASE (0x53FEC000)
-#define IMX_IIM_BASE (0x53FF0000)
-#define IIM_BASE_ADDR IMX_IIM_BASE
-#define IMX_USB_BASE (0x53FF4000)
-/*
- * This is in contradiction to the imx25 reference manual, which says that
- * port 1's registers start at 0x53FF4200. The correct base address for
- * port 1 is 0x53FF4400. The kernel uses 0x53FF4400 as well.
- */
-#define IMX_USB_PORT_OFFSET 0x400
-#define IMX_CSI_BASE (0x53FF8000)
-#define IMX_DRYICE_BASE (0x53FFC000)
-
-#define IMX_ARM926_ROMPATCH (0x60000000)
-#define IMX_ARM926_ASIC (0x68000000)
-
-/* 128K Internal Static RAM */
-#define IMX_RAM_BASE (0x78000000)
-#define IMX_RAM_SIZE (128 * 1024)
-
-/* SDRAM BANKS */
-#define IMX_SDRAM_BANK0_BASE (0x80000000)
-#define IMX_SDRAM_BANK1_BASE (0x90000000)
-
-#define IMX_WEIM_CS0 (0xA0000000)
-#define IMX_WEIM_CS1 (0xA8000000)
-#define IMX_WEIM_CS2 (0xB0000000)
-#define IMX_WEIM_CS3 (0xB2000000)
-#define IMX_WEIM_CS4 (0xB4000000)
-#define IMX_ESDRAMC_BASE (0xB8001000)
-#define IMX_WEIM_CTRL_BASE (0xB8002000)
-#define IMX_M3IF_CTRL_BASE (0xB8003000)
-#define IMX_EMI_CTRL_BASE (0xB8004000)
-
-/* NAND Flash Controller */
-#define IMX_NFC_BASE (0xBB000000)
-#define NFC_BASE_ADDR IMX_NFC_BASE
-
-/* CCM bitfields */
-#define CCM_PLL_MFI_SHIFT 10
-#define CCM_PLL_MFI_MASK 0xf
-#define CCM_PLL_MFN_SHIFT 0
-#define CCM_PLL_MFN_MASK 0x3ff
-#define CCM_PLL_MFD_SHIFT 16
-#define CCM_PLL_MFD_MASK 0x3ff
-#define CCM_PLL_PD_SHIFT 26
-#define CCM_PLL_PD_MASK 0xf
-#define CCM_CCTL_ARM_DIV_SHIFT 30
-#define CCM_CCTL_ARM_DIV_MASK 3
-#define CCM_CCTL_AHB_DIV_SHIFT 28
-#define CCM_CCTL_AHB_DIV_MASK 3
-#define CCM_CCTL_ARM_SRC (1 << 14)
-#define CCM_CGR1_GPT1 (1 << 19)
-#define CCM_PERCLK_REG(clk) (clk / 4)
-#define CCM_PERCLK_SHIFT(clk) (8 * (clk % 4))
-#define CCM_PERCLK_MASK 0x3f
-#define CCM_RCSR_NF_16BIT_SEL (1 << 14)
-#define CCM_RCSR_NF_PS(v) ((v >> 26) & 3)
-#define CCM_CRDR_BT_UART_SRC_SHIFT 29
-#define CCM_CRDR_BT_UART_SRC_MASK 7
-
-/* ESDRAM Controller register bitfields */
-#define ESDCTL_PRCT(x) (((x) & 0x3f) << 0)
-#define ESDCTL_BL (1 << 7)
-#define ESDCTL_FP (1 << 8)
-#define ESDCTL_PWDT(x) (((x) & 3) << 10)
-#define ESDCTL_SREFR(x) (((x) & 7) << 13)
-#define ESDCTL_DSIZ_16_UPPER (0 << 16)
-#define ESDCTL_DSIZ_16_LOWER (1 << 16)
-#define ESDCTL_DSIZ_32 (2 << 16)
-#define ESDCTL_COL8 (0 << 20)
-#define ESDCTL_COL9 (1 << 20)
-#define ESDCTL_COL10 (2 << 20)
-#define ESDCTL_ROW11 (0 << 24)
-#define ESDCTL_ROW12 (1 << 24)
-#define ESDCTL_ROW13 (2 << 24)
-#define ESDCTL_ROW14 (3 << 24)
-#define ESDCTL_ROW15 (4 << 24)
-#define ESDCTL_SP (1 << 27)
-#define ESDCTL_SMODE_NORMAL (0 << 28)
-#define ESDCTL_SMODE_PRECHARGE (1 << 28)
-#define ESDCTL_SMODE_AUTO_REF (2 << 28)
-#define ESDCTL_SMODE_LOAD_MODE (3 << 28)
-#define ESDCTL_SMODE_MAN_REF (4 << 28)
-#define ESDCTL_SDE (1 << 31)
-
-#define ESDCFG_TRC(x) (((x) & 0xf) << 0)
-#define ESDCFG_TRCD(x) (((x) & 0x7) << 4)
-#define ESDCFG_TCAS(x) (((x) & 0x3) << 8)
-#define ESDCFG_TRRD(x) (((x) & 0x3) << 10)
-#define ESDCFG_TRAS(x) (((x) & 0x7) << 12)
-#define ESDCFG_TWR (1 << 15)
-#define ESDCFG_TMRD(x) (((x) & 0x3) << 16)
-#define ESDCFG_TRP(x) (((x) & 0x3) << 18)
-#define ESDCFG_TWTR (1 << 20)
-#define ESDCFG_TXP(x) (((x) & 0x3) << 21)
-
-#define ESDMISC_RST (1 << 1)
-#define ESDMISC_MDDREN (1 << 2)
-#define ESDMISC_MDDR_DL_RST (1 << 3)
-#define ESDMISC_MDDR_MDIS (1 << 4)
-#define ESDMISC_LHD (1 << 5)
-#define ESDMISC_MA10_SHARE (1 << 6)
-#define ESDMISC_SDRAM_RDY (1 << 31)
-
-/* GPT bits */
-#define GPT_CTRL_SWR (1 << 15) /* Software reset */
-#define GPT_CTRL_FRR (1 << 9) /* Freerun / restart */
-#define GPT_CTRL_CLKSOURCE_32 (4 << 6) /* Clock source */
-#define GPT_CTRL_TEN 1 /* Timer enable */
-
-/* WDOG enable */
-#define WCR_WDE 0x04
-#define WSR_UNLOCK1 0x5555
-#define WSR_UNLOCK2 0xAAAA
-
-/* MAX bits */
-#define MAX_MGPCR_AULB(x) (((x) & 0x7) << 0)
-
-/* M3IF bits */
-#define M3IF_CTL_MRRP(x) (((x) & 0xff) << 0)
-
-/* WEIM bits */
-/* 13 fields of the upper CS control register */
-#define WEIM_CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
- cnc, wsc, ew, wws, edc) \
- ((sp) << 31 | (wp) << 30 | (bcd) << 28 | (bcs) << 24 | \
- (psz) << 22 | (pme) << 21 | (sync) << 20 | (dol) << 16 | \
- (cnc) << 14 | (wsc) << 8 | (ew) << 7 | (wws) << 4 | (edc) << 0)
-/* 12 fields of the lower CS control register */
-#define WEIM_CSCR_L(oea, oen, ebwa, ebwn, \
- csa, ebc, dsz, csn, psr, cre, wrap, csen) \
- ((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
- (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
- (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
-/* 14 fields of the additional CS control register */
-#define WEIM_CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
- wwu, age, cnc2, fce) \
- ((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
- (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
- (dww) << 6 | (dct) << 4 | (wwu) << 3 |\
- (age) << 2 | (cnc2) << 1 | (fce) << 0)
-
-/* Names used in GPIO driver */
-#define GPIO1_BASE_ADDR IMX_GPIO1_BASE
-#define GPIO2_BASE_ADDR IMX_GPIO2_BASE
-#define GPIO3_BASE_ADDR IMX_GPIO3_BASE
-#define GPIO4_BASE_ADDR IMX_GPIO4_BASE
-
-/*
- * CSPI register definitions
- */
-#define MXC_SPI_BASE_ADDRESSES \
- IMX_CSPI1_BASE, \
- IMX_CSPI2_BASE, \
- IMX_CSPI3_BASE
-
-#endif /* _IMX_REGS_H */
deleted file mode 100644
@@ -1,537 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2013 ADVANSEE
- * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
- *
- * Based on mainline Linux i.MX iomux-mx25.h file:
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * Based on Linux arch/arm/mach-mx25/mx25_pins.h:
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h:
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- */
-
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
-
-#include <asm/mach-imx/iomux-v3.h>
-
-/* Pad control groupings */
-#define MX25_KPP_ROW_PAD_CTRL PAD_CTL_PUS_100K_UP
-#define MX25_KPP_COL_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-/*
- * The naming convention for the pad modes is MX25_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux-v3.h
- */
-
-/* PAD MUX ALT INPSE PATH PADCTRL */
-enum {
- MX25_PAD_A10__A10 = IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A10__GPIO_4_0 = IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A13__A13 = IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A13__GPIO_4_1 = IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A14__A14 = IOMUX_PAD(0x230, 0x010, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A14__GPIO_2_0 = IOMUX_PAD(0x230, 0x010, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A15__A15 = IOMUX_PAD(0x234, 0x014, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A15__GPIO_2_1 = IOMUX_PAD(0x234, 0x014, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A16__A16 = IOMUX_PAD(0x000, 0x018, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A16__GPIO_2_2 = IOMUX_PAD(0x000, 0x018, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A17__A17 = IOMUX_PAD(0x238, 0x01c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A17__GPIO_2_3 = IOMUX_PAD(0x238, 0x01c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A18__A18 = IOMUX_PAD(0x23c, 0x020, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A18__GPIO_2_4 = IOMUX_PAD(0x23c, 0x020, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A18__FEC_COL = IOMUX_PAD(0x23c, 0x020, 0x07, 0x504, 0, NO_PAD_CTRL),
-
- MX25_PAD_A19__A19 = IOMUX_PAD(0x240, 0x024, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A19__FEC_RX_ER = IOMUX_PAD(0x240, 0x024, 0x07, 0x518, 0, NO_PAD_CTRL),
- MX25_PAD_A19__GPIO_2_5 = IOMUX_PAD(0x240, 0x024, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A20__A20 = IOMUX_PAD(0x244, 0x028, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A20__GPIO_2_6 = IOMUX_PAD(0x244, 0x028, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A20__FEC_RDATA2 = IOMUX_PAD(0x244, 0x028, 0x07, 0x50c, 0, NO_PAD_CTRL),
-
- MX25_PAD_A21__A21 = IOMUX_PAD(0x248, 0x02c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A21__GPIO_2_7 = IOMUX_PAD(0x248, 0x02c, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A21__FEC_RDATA3 = IOMUX_PAD(0x248, 0x02c, 0x07, 0x510, 0, NO_PAD_CTRL),
-
- MX25_PAD_A22__A22 = IOMUX_PAD(0x000, 0x030, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A22__GPIO_2_8 = IOMUX_PAD(0x000, 0x030, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A23__A23 = IOMUX_PAD(0x24c, 0x034, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A23__GPIO_2_9 = IOMUX_PAD(0x24c, 0x034, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_A24__A24 = IOMUX_PAD(0x250, 0x038, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A24__GPIO_2_10 = IOMUX_PAD(0x250, 0x038, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A24__FEC_RX_CLK = IOMUX_PAD(0x250, 0x038, 0x07, 0x514, 0, NO_PAD_CTRL),
-
- MX25_PAD_A25__A25 = IOMUX_PAD(0x254, 0x03c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A25__GPIO_2_11 = IOMUX_PAD(0x254, 0x03c, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_A25__FEC_CRS = IOMUX_PAD(0x254, 0x03c, 0x07, 0x508, 0, NO_PAD_CTRL),
-
- MX25_PAD_EB0__EB0 = IOMUX_PAD(0x258, 0x040, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_EB0__AUD4_TXD = IOMUX_PAD(0x258, 0x040, 0x04, 0x464, 0, NO_PAD_CTRL),
- MX25_PAD_EB0__GPIO_2_12 = IOMUX_PAD(0x258, 0x040, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_EB1__EB1 = IOMUX_PAD(0x25c, 0x044, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_EB1__AUD4_RXD = IOMUX_PAD(0x25c, 0x044, 0x04, 0x460, 0, NO_PAD_CTRL),
- MX25_PAD_EB1__GPIO_2_13 = IOMUX_PAD(0x25c, 0x044, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_OE__OE = IOMUX_PAD(0x260, 0x048, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_OE__AUD4_TXC = IOMUX_PAD(0x260, 0x048, 0x04, 0, 0, NO_PAD_CTRL),
- MX25_PAD_OE__GPIO_2_14 = IOMUX_PAD(0x260, 0x048, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CS0__CS0 = IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS0__GPIO_4_2 = IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CS1__CS1 = IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS1__NF_CE3 = IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS1__GPIO_4_3 = IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CS4__CS4 = IOMUX_PAD(0x264, 0x054, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS4__NF_CE1 = IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS4__UART5_CTS = IOMUX_PAD(0x264, 0x054, 0x03, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS4__GPIO_3_20 = IOMUX_PAD(0x264, 0x054, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CS5__CS5 = IOMUX_PAD(0x268, 0x058, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS5__NF_CE2 = IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CS5__UART5_RTS = IOMUX_PAD(0x268, 0x058, 0x03, 0x574, 0, NO_PAD_CTRL),
- MX25_PAD_CS5__GPIO_3_21 = IOMUX_PAD(0x268, 0x058, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NF_CE0__NF_CE0 = IOMUX_PAD(0x26c, 0x05c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NF_CE0__GPIO_3_22 = IOMUX_PAD(0x26c, 0x05c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_ECB__ECB = IOMUX_PAD(0x270, 0x060, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_ECB__UART5_TXD_MUX = IOMUX_PAD(0x270, 0x060, 0x03, 0, 0, NO_PAD_CTRL),
- MX25_PAD_ECB__GPIO_3_23 = IOMUX_PAD(0x270, 0x060, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LBA__LBA = IOMUX_PAD(0x274, 0x064, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_LBA__UART5_RXD_MUX = IOMUX_PAD(0x274, 0x064, 0x03, 0x578, 0, NO_PAD_CTRL),
- MX25_PAD_LBA__GPIO_3_24 = IOMUX_PAD(0x274, 0x064, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_BCLK__BCLK = IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_BCLK__GPIO_4_4 = IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_RW__RW = IOMUX_PAD(0x278, 0x06c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_RW__AUD4_TXFS = IOMUX_PAD(0x278, 0x06c, 0x04, 0x474, 0, NO_PAD_CTRL),
- MX25_PAD_RW__GPIO_3_25 = IOMUX_PAD(0x278, 0x06c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFWE_B__NFWE_B = IOMUX_PAD(0x000, 0x070, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NFWE_B__GPIO_3_26 = IOMUX_PAD(0x000, 0x070, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFRE_B__NFRE_B = IOMUX_PAD(0x000, 0x074, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NFRE_B__GPIO_3_27 = IOMUX_PAD(0x000, 0x074, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFALE__NFALE = IOMUX_PAD(0x000, 0x078, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NFALE__GPIO_3_28 = IOMUX_PAD(0x000, 0x078, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFCLE__NFCLE = IOMUX_PAD(0x000, 0x07c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NFCLE__GPIO_3_29 = IOMUX_PAD(0x000, 0x07c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFWP_B__NFWP_B = IOMUX_PAD(0x000, 0x080, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_NFWP_B__GPIO_3_30 = IOMUX_PAD(0x000, 0x080, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_NFRB__NFRB = IOMUX_PAD(0x27c, 0x084, 0x00, 0, 0, PAD_CTL_PKE),
- MX25_PAD_NFRB__GPIO_3_31 = IOMUX_PAD(0x27c, 0x084, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D15__D15 = IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D15__LD16 = IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_D15__GPIO_4_5 = IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D14__D14 = IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D14__LD17 = IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_D14__GPIO_4_6 = IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D13__D13 = IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D13__LD18 = IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_D13__GPIO_4_7 = IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D12__D12 = IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D12__GPIO_4_8 = IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D11__D11 = IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D11__GPIO_4_9 = IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D10__D10 = IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D10__GPIO_4_10 = IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D10__USBOTG_OC = IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP),
-
- MX25_PAD_D9__D9 = IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D9__GPIO_4_11 = IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D9__USBH2_PWR = IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE),
-
- MX25_PAD_D8__D8 = IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D8__GPIO_4_12 = IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D8__USBH2_OC = IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP),
-
- MX25_PAD_D7__D7 = IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D7__GPIO_4_13 = IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D6__D6 = IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D6__GPIO_4_14 = IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D5__D5 = IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D5__GPIO_4_15 = IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D4__D4 = IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D4__GPIO_4_16 = IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D3__D3 = IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D3__GPIO_4_17 = IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D2__D2 = IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D2__GPIO_4_18 = IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D1__D1 = IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D1__GPIO_4_19 = IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_D0__D0 = IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_D0__GPIO_4_20 = IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD0__LD0 = IOMUX_PAD(0x2c0, 0x0c8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD0__CSI_D0 = IOMUX_PAD(0x2c0, 0x0c8, 0x02, 0x488, 0, NO_PAD_CTRL),
- MX25_PAD_LD0__GPIO_2_15 = IOMUX_PAD(0x2c0, 0x0c8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD1__LD1 = IOMUX_PAD(0x2c4, 0x0cc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD1__CSI_D1 = IOMUX_PAD(0x2c4, 0x0cc, 0x02, 0x48c, 0, NO_PAD_CTRL),
- MX25_PAD_LD1__GPIO_2_16 = IOMUX_PAD(0x2c4, 0x0cc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD2__LD2 = IOMUX_PAD(0x2c8, 0x0d0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD2__GPIO_2_17 = IOMUX_PAD(0x2c8, 0x0d0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD3__LD3 = IOMUX_PAD(0x2cc, 0x0d4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD3__GPIO_2_18 = IOMUX_PAD(0x2cc, 0x0d4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD4__LD4 = IOMUX_PAD(0x2d0, 0x0d8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD4__GPIO_2_19 = IOMUX_PAD(0x2d0, 0x0d8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD5__LD5 = IOMUX_PAD(0x2d4, 0x0dc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD5__GPIO_1_19 = IOMUX_PAD(0x2d4, 0x0dc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD6__LD6 = IOMUX_PAD(0x2d8, 0x0e0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD6__GPIO_1_20 = IOMUX_PAD(0x2d8, 0x0e0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD7__LD7 = IOMUX_PAD(0x2dc, 0x0e4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD7__GPIO_1_21 = IOMUX_PAD(0x2dc, 0x0e4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD8__LD8 = IOMUX_PAD(0x2e0, 0x0e8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD8__FEC_TX_ERR = IOMUX_PAD(0x2e0, 0x0e8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD9__LD9 = IOMUX_PAD(0x2e4, 0x0ec, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD9__FEC_COL = IOMUX_PAD(0x2e4, 0x0ec, 0x05, 0x504, 1, NO_PAD_CTRL),
-
- MX25_PAD_LD10__LD10 = IOMUX_PAD(0x2e8, 0x0f0, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD10__FEC_RX_ER = IOMUX_PAD(0x2e8, 0x0f0, 0x05, 0x518, 1, NO_PAD_CTRL),
-
- MX25_PAD_LD11__LD11 = IOMUX_PAD(0x2ec, 0x0f4, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD11__FEC_RDATA2 = IOMUX_PAD(0x2ec, 0x0f4, 0x05, 0x50c, 1, NO_PAD_CTRL),
-
- MX25_PAD_LD12__LD12 = IOMUX_PAD(0x2f0, 0x0f8, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD12__FEC_RDATA3 = IOMUX_PAD(0x2f0, 0x0f8, 0x05, 0x510, 1, NO_PAD_CTRL),
-
- MX25_PAD_LD13__LD13 = IOMUX_PAD(0x2f4, 0x0fc, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD13__FEC_TDATA2 = IOMUX_PAD(0x2f4, 0x0fc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD14__LD14 = IOMUX_PAD(0x2f8, 0x100, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD14__FEC_TDATA3 = IOMUX_PAD(0x2f8, 0x100, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LD15__LD15 = IOMUX_PAD(0x2fc, 0x104, 0x00, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_LD15__FEC_RX_CLK = IOMUX_PAD(0x2fc, 0x104, 0x05, 0x514, 1, NO_PAD_CTRL),
-
- MX25_PAD_HSYNC__HSYNC = IOMUX_PAD(0x300, 0x108, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_HSYNC__GPIO_1_22 = IOMUX_PAD(0x300, 0x108, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_VSYNC__VSYNC = IOMUX_PAD(0x304, 0x10c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_VSYNC__GPIO_1_23 = IOMUX_PAD(0x304, 0x10c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_LSCLK__LSCLK = IOMUX_PAD(0x308, 0x110, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_LSCLK__GPIO_1_24 = IOMUX_PAD(0x308, 0x110, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_OE_ACD__OE_ACD = IOMUX_PAD(0x30c, 0x114, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_OE_ACD__GPIO_1_25 = IOMUX_PAD(0x30c, 0x114, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CONTRAST__CONTRAST = IOMUX_PAD(0x310, 0x118, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CONTRAST__PWM4_PWMO = IOMUX_PAD(0x310, 0x118, 0x04, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CONTRAST__FEC_CRS = IOMUX_PAD(0x310, 0x118, 0x05, 0x508, 1, NO_PAD_CTRL),
-
- MX25_PAD_PWM__PWM = IOMUX_PAD(0x314, 0x11c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_PWM__GPIO_1_26 = IOMUX_PAD(0x314, 0x11c, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_PWM__USBH2_OC = IOMUX_PAD(0x314, 0x11c, 0x06, 0x580, 1, PAD_CTL_PUS_100K_UP),
-
- MX25_PAD_CSI_D2__CSI_D2 = IOMUX_PAD(0x318, 0x120, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D2__UART5_RXD_MUX = IOMUX_PAD(0x318, 0x120, 0x01, 0x578, 1, NO_PAD_CTRL),
- MX25_PAD_CSI_D2__GPIO_1_27 = IOMUX_PAD(0x318, 0x120, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D2__CSPI3_MOSI = IOMUX_PAD(0x318, 0x120, 0x07, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D3__CSI_D3 = IOMUX_PAD(0x31c, 0x124, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D3__GPIO_1_28 = IOMUX_PAD(0x31c, 0x124, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D3__CSPI3_MISO = IOMUX_PAD(0x31c, 0x124, 0x07, 0x4b4, 1, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D4__CSI_D4 = IOMUX_PAD(0x320, 0x128, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D4__UART5_RTS = IOMUX_PAD(0x320, 0x128, 0x01, 0x574, 1, NO_PAD_CTRL),
- MX25_PAD_CSI_D4__GPIO_1_29 = IOMUX_PAD(0x320, 0x128, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D4__CSPI3_SCLK = IOMUX_PAD(0x320, 0x128, 0x07, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D5__CSI_D5 = IOMUX_PAD(0x324, 0x12c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D5__GPIO_1_30 = IOMUX_PAD(0x324, 0x12c, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D5__CSPI3_RDY = IOMUX_PAD(0x324, 0x12c, 0x07, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D6__CSI_D6 = IOMUX_PAD(0x328, 0x130, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D6__GPIO_1_31 = IOMUX_PAD(0x328, 0x130, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D7__CSI_D7 = IOMUX_PAD(0x32c, 0x134, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D7__GPIO_1_6 = IOMUX_PAD(0x32c, 0x134, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D8__CSI_D8 = IOMUX_PAD(0x330, 0x138, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D8__GPIO_1_7 = IOMUX_PAD(0x330, 0x138, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_D9__CSI_D9 = IOMUX_PAD(0x334, 0x13c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_D9__GPIO_4_21 = IOMUX_PAD(0x334, 0x13c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x338, 0x140, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_MCLK__GPIO_1_8 = IOMUX_PAD(0x338, 0x140, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x33c, 0x144, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_VSYNC__GPIO_1_9 = IOMUX_PAD(0x33c, 0x144, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x340, 0x148, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_HSYNC__GPIO_1_10 = IOMUX_PAD(0x340, 0x148, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x344, 0x14c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSI_PIXCLK__GPIO_1_11 = IOMUX_PAD(0x344, 0x14c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_I2C1_CLK__I2C1_CLK = IOMUX_PAD(0x348, 0x150, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_I2C1_CLK__GPIO_1_12 = IOMUX_PAD(0x348, 0x150, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_I2C1_DAT__I2C1_DAT = IOMUX_PAD(0x34c, 0x154, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_I2C1_DAT__GPIO_1_13 = IOMUX_PAD(0x34c, 0x154, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x350, 0x158, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSPI1_MOSI__GPIO_1_14 = IOMUX_PAD(0x350, 0x158, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x354, 0x15c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSPI1_MISO__GPIO_1_15 = IOMUX_PAD(0x354, 0x15c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x358, 0x160, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSPI1_SS0__GPIO_1_16 = IOMUX_PAD(0x358, 0x160, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x35c, 0x164, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSPI1_SS1__I2C3_DAT = IOMUX_PAD(0x35c, 0x164, 0x01, 0x528, 1, NO_PAD_CTRL),
- MX25_PAD_CSPI1_SS1__GPIO_1_17 = IOMUX_PAD(0x35c, 0x164, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x360, 0x168, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CSPI1_SCLK__GPIO_1_18 = IOMUX_PAD(0x360, 0x168, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CSPI1_RDY__CSPI1_RDY = IOMUX_PAD(0x364, 0x16c, 0x00, 0, 0, PAD_CTL_PKE),
- MX25_PAD_CSPI1_RDY__GPIO_2_22 = IOMUX_PAD(0x364, 0x16c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x368, 0x170, 0x00, 0, 0, PAD_CTL_PUS_100K_DOWN),
- MX25_PAD_UART1_RXD__GPIO_4_22 = IOMUX_PAD(0x368, 0x170, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x36c, 0x174, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UART1_TXD__GPIO_4_23 = IOMUX_PAD(0x36c, 0x174, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x370, 0x178, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_UART1_RTS__CSI_D0 = IOMUX_PAD(0x370, 0x178, 0x01, 0x488, 1, NO_PAD_CTRL),
- MX25_PAD_UART1_RTS__GPIO_4_24 = IOMUX_PAD(0x370, 0x178, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x374, 0x17c, 0x00, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_UART1_CTS__CSI_D1 = IOMUX_PAD(0x374, 0x17c, 0x01, 0x48c, 1, NO_PAD_CTRL),
- MX25_PAD_UART1_CTS__GPIO_4_25 = IOMUX_PAD(0x374, 0x17c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART2_RXD__UART2_RXD = IOMUX_PAD(0x378, 0x180, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UART2_RXD__GPIO_4_26 = IOMUX_PAD(0x378, 0x180, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART2_TXD__UART2_TXD = IOMUX_PAD(0x37c, 0x184, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UART2_TXD__GPIO_4_27 = IOMUX_PAD(0x37c, 0x184, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART2_RTS__UART2_RTS = IOMUX_PAD(0x380, 0x188, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UART2_RTS__FEC_COL = IOMUX_PAD(0x380, 0x188, 0x02, 0x504, 2, NO_PAD_CTRL),
- MX25_PAD_UART2_RTS__GPIO_4_28 = IOMUX_PAD(0x380, 0x188, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UART2_CTS__FEC_RX_ER = IOMUX_PAD(0x384, 0x18c, 0x02, 0x518, 2, NO_PAD_CTRL),
- MX25_PAD_UART2_CTS__UART2_CTS = IOMUX_PAD(0x384, 0x18c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UART2_CTS__GPIO_4_29 = IOMUX_PAD(0x384, 0x18c, 0x05, 0, 0, NO_PAD_CTRL),
-
- /*
- * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
- * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
- * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
- * bug that configuring the SD1_CMD function doesn't enable the input path for
- * this pin.
- * This might have side effects for other hardware units that are connected to
- * that pin and use the respective function as input.
- */
- MX25_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_CMD__FEC_RDATA2 = IOMUX_PAD(0x388, 0x190, 0x02, 0x50c, 2, NO_PAD_CTRL),
- MX25_PAD_SD1_CMD__GPIO_2_23 = IOMUX_PAD(0x388, 0x190, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x38c, 0x194, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_CLK__FEC_RDATA3 = IOMUX_PAD(0x38c, 0x194, 0x02, 0x510, 2, NO_PAD_CTRL),
- MX25_PAD_SD1_CLK__GPIO_2_24 = IOMUX_PAD(0x38c, 0x194, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x390, 0x198, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_DATA0__GPIO_2_25 = IOMUX_PAD(0x390, 0x198, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x394, 0x19c, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_DATA1__AUD7_RXD = IOMUX_PAD(0x394, 0x19c, 0x03, 0x478, 0, NO_PAD_CTRL),
- MX25_PAD_SD1_DATA1__GPIO_2_26 = IOMUX_PAD(0x394, 0x19c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x398, 0x1a0, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_DATA2__FEC_RX_CLK = IOMUX_PAD(0x398, 0x1a0, 0x05, 0x514, 2, NO_PAD_CTRL),
- MX25_PAD_SD1_DATA2__GPIO_2_27 = IOMUX_PAD(0x398, 0x1a0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x39c, 0x1a4, 0x00, 0, 0, PAD_CTL_PUS_47K_UP),
- MX25_PAD_SD1_DATA3__FEC_CRS = IOMUX_PAD(0x39c, 0x1a4, 0x00, 0x508, 2, NO_PAD_CTRL),
- MX25_PAD_SD1_DATA3__GPIO_2_28 = IOMUX_PAD(0x39c, 0x1a4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_ROW0__KPP_ROW0 = IOMUX_PAD(0x3a0, 0x1a8, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
- MX25_PAD_KPP_ROW0__GPIO_2_29 = IOMUX_PAD(0x3a0, 0x1a8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_ROW1__KPP_ROW1 = IOMUX_PAD(0x3a4, 0x1ac, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
- MX25_PAD_KPP_ROW1__GPIO_2_30 = IOMUX_PAD(0x3a4, 0x1ac, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_ROW2__KPP_ROW2 = IOMUX_PAD(0x3a8, 0x1b0, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
- MX25_PAD_KPP_ROW2__CSI_D0 = IOMUX_PAD(0x3a8, 0x1b0, 0x03, 0x488, 2, NO_PAD_CTRL),
- MX25_PAD_KPP_ROW2__GPIO_2_31 = IOMUX_PAD(0x3a8, 0x1b0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_ROW3__KPP_ROW3 = IOMUX_PAD(0x3ac, 0x1b4, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL),
- MX25_PAD_KPP_ROW3__CSI_LD1 = IOMUX_PAD(0x3ac, 0x1b4, 0x03, 0x48c, 2, NO_PAD_CTRL),
- MX25_PAD_KPP_ROW3__GPIO_3_0 = IOMUX_PAD(0x3ac, 0x1b4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_COL0__KPP_COL0 = IOMUX_PAD(0x3b0, 0x1b8, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
- MX25_PAD_KPP_COL0__UART4_RXD_MUX = IOMUX_PAD(0x3b0, 0x1b8, 0x01, 0x570, 1, NO_PAD_CTRL),
- MX25_PAD_KPP_COL0__AUD5_TXD = IOMUX_PAD(0x3b0, 0x1b8, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_KPP_COL0__GPIO_3_1 = IOMUX_PAD(0x3b0, 0x1b8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_COL1__KPP_COL1 = IOMUX_PAD(0x3b4, 0x1bc, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
- MX25_PAD_KPP_COL1__UART4_TXD_MUX = IOMUX_PAD(0x3b4, 0x1bc, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_KPP_COL1__AUD5_RXD = IOMUX_PAD(0x3b4, 0x1bc, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_KPP_COL1__GPIO_3_2 = IOMUX_PAD(0x3b4, 0x1bc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_COL2__KPP_COL2 = IOMUX_PAD(0x3b8, 0x1c0, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
- MX25_PAD_KPP_COL2__UART4_RTS = IOMUX_PAD(0x3b8, 0x1c0, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_KPP_COL2__AUD5_TXC = IOMUX_PAD(0x3b8, 0x1c0, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_KPP_COL2__GPIO_3_3 = IOMUX_PAD(0x3b8, 0x1c0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_KPP_COL3__KPP_COL3 = IOMUX_PAD(0x3bc, 0x1c4, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL),
- MX25_PAD_KPP_COL3__UART4_CTS = IOMUX_PAD(0x3bc, 0x1c4, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_KPP_COL3__AUD5_TXFS = IOMUX_PAD(0x3bc, 0x1c4, 0x02, 0, 0, PAD_CTL_PUS_100K_UP),
- MX25_PAD_KPP_COL3__GPIO_3_4 = IOMUX_PAD(0x3bc, 0x1c4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x3c0, 0x1c8, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_FEC_MDC__AUD4_TXD = IOMUX_PAD(0x3c0, 0x1c8, 0x02, 0x464, 1, NO_PAD_CTRL),
- MX25_PAD_FEC_MDC__GPIO_3_5 = IOMUX_PAD(0x3c0, 0x1c8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
- MX25_PAD_FEC_MDIO__AUD4_RXD = IOMUX_PAD(0x3c4, 0x1cc, 0x02, 0x460, 1, NO_PAD_CTRL),
- MX25_PAD_FEC_MDIO__GPIO_3_6 = IOMUX_PAD(0x3c4, 0x1cc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_TDATA0__FEC_TDATA0 = IOMUX_PAD(0x3c8, 0x1d0, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_FEC_TDATA0__GPIO_3_7 = IOMUX_PAD(0x3c8, 0x1d0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_TDATA1__FEC_TDATA1 = IOMUX_PAD(0x3cc, 0x1d4, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_FEC_TDATA1__AUD4_TXFS = IOMUX_PAD(0x3cc, 0x1d4, 0x02, 0x474, 1, NO_PAD_CTRL),
- MX25_PAD_FEC_TDATA1__GPIO_3_8 = IOMUX_PAD(0x3cc, 0x1d4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x3d0, 0x1d8, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_FEC_TX_EN__GPIO_3_9 = IOMUX_PAD(0x3d0, 0x1d8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_RDATA0__FEC_RDATA0 = IOMUX_PAD(0x3d4, 0x1dc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
- MX25_PAD_FEC_RDATA0__GPIO_3_10 = IOMUX_PAD(0x3d4, 0x1dc, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_RDATA1__FEC_RDATA1 = IOMUX_PAD(0x3d8, 0x1e0, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
- MX25_PAD_FEC_RDATA1__GPIO_3_11 = IOMUX_PAD(0x3d8, 0x1e0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x3dc, 0x1e4, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
- MX25_PAD_FEC_RX_DV__CAN2_RX = IOMUX_PAD(0x3dc, 0x1e4, 0x04, 0x484, 0, PAD_CTL_PUS_22K_UP),
- MX25_PAD_FEC_RX_DV__GPIO_3_12 = IOMUX_PAD(0x3dc, 0x1e4, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x3e0, 0x1e8, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN),
- MX25_PAD_FEC_TX_CLK__GPIO_3_13 = IOMUX_PAD(0x3e0, 0x1e8, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_RTCK__RTCK = IOMUX_PAD(0x3e4, 0x1ec, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_RTCK__OWIRE = IOMUX_PAD(0x3e4, 0x1ec, 0x01, 0, 0, NO_PAD_CTRL),
- MX25_PAD_RTCK__GPIO_3_14 = IOMUX_PAD(0x3e4, 0x1ec, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_DE_B__DE_B = IOMUX_PAD(0x3ec, 0x1f0, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_DE_B__GPIO_2_20 = IOMUX_PAD(0x3ec, 0x1f0, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_TDO__TDO = IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_GPIO_A__GPIO_A = IOMUX_PAD(0x3f0, 0x1f4, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_A__CAN1_TX = IOMUX_PAD(0x3f0, 0x1f4, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
- MX25_PAD_GPIO_A__USBOTG_PWR = IOMUX_PAD(0x3f0, 0x1f4, 0x02, 0, 0, PAD_CTL_PKE),
-
- MX25_PAD_GPIO_B__GPIO_B = IOMUX_PAD(0x3f4, 0x1f8, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_B__CAN1_RX = IOMUX_PAD(0x3f4, 0x1f8, 0x06, 0x480, 1, PAD_CTL_PUS_22K_UP),
- MX25_PAD_GPIO_B__USBOTG_OC = IOMUX_PAD(0x3f4, 0x1f8, 0x02, 0x57c, 1, PAD_CTL_PUS_100K_UP),
-
- MX25_PAD_GPIO_C__GPIO_C = IOMUX_PAD(0x3f8, 0x1fc, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_C__CAN2_TX = IOMUX_PAD(0x3f8, 0x1fc, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
-
- MX25_PAD_GPIO_D__GPIO_D = IOMUX_PAD(0x3fc, 0x200, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_E__LD16 = IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_GPIO_D__CAN2_RX = IOMUX_PAD(0x3fc, 0x200, 0x06, 0x484, 1, PAD_CTL_PUS_22K_UP),
-
- MX25_PAD_GPIO_E__GPIO_E = IOMUX_PAD(0x400, 0x204, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_F__LD17 = IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST),
- MX25_PAD_GPIO_E__I2C3_CLK = IOMUX_PAD(0x400, 0x204, 0x01, 0x524, 2, NO_PAD_CTRL),
- MX25_PAD_GPIO_E__AUD7_TXD = IOMUX_PAD(0x400, 0x204, 0x04, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_GPIO_F__GPIO_F = IOMUX_PAD(0x404, 0x208, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_GPIO_F__AUD7_TXC = IOMUX_PAD(0x404, 0x208, 0x04, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_EXT_ARMCLK__EXT_ARMCLK = IOMUX_PAD(0x000, 0x20c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_EXT_ARMCLK__GPIO_3_15 = IOMUX_PAD(0x000, 0x20c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK = IOMUX_PAD(0x000, 0x210, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_UPLL_BYPCLK__GPIO_3_16 = IOMUX_PAD(0x000, 0x210, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_VSTBY_REQ__VSTBY_REQ = IOMUX_PAD(0x408, 0x214, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_VSTBY_REQ__AUD7_TXFS = IOMUX_PAD(0x408, 0x214, 0x04, 0, 0, NO_PAD_CTRL),
- MX25_PAD_VSTBY_REQ__GPIO_3_17 = IOMUX_PAD(0x408, 0x214, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_VSTBY_ACK__VSTBY_ACK = IOMUX_PAD(0x40c, 0x218, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_VSTBY_ACK__GPIO_3_18 = IOMUX_PAD(0x40c, 0x218, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_POWER_FAIL__POWER_FAIL = IOMUX_PAD(0x410, 0x21c, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_POWER_FAIL__AUD7_RXD = IOMUX_PAD(0x410, 0x21c, 0x04, 0x478, 1, NO_PAD_CTRL),
- MX25_PAD_POWER_FAIL__GPIO_3_19 = IOMUX_PAD(0x410, 0x21c, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CLKO__CLKO = IOMUX_PAD(0x414, 0x220, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CLKO__GPIO_2_21 = IOMUX_PAD(0x414, 0x220, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_BOOT_MODE0__BOOT_MODE0 = IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_BOOT_MODE0__GPIO_4_30 = IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL),
- MX25_PAD_BOOT_MODE1__BOOT_MODE1 = IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL),
- MX25_PAD_BOOT_MODE1__GPIO_4_31 = IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL),
-
- MX25_PAD_CTL_GRP_DVS_MISC = IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_FEC = IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_JTAG = IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_NFC = IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_CSI = IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_WEIM = IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_DDR = IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_CRM = IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_KPP = IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_SDHC1 = IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_LCD = IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_UART = IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_NFC = IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_CSI = IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DSE_CSPI1 = IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DDRTYPE = IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_SDHC1 = IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL),
- MX25_PAD_CTL_GRP_DVS_LCD = IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL),
-};
-
-#endif /* __IOMUX_MX25_H__ */
deleted file mode 100644
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Matthias Weisser <weisserm@arcor.de>
- *
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Common asm macros for imx25
- */
-
-#ifndef __ASM_ARM_ARCH_MACRO_H__
-#define __ASM_ARM_ARCH_MACRO_H__
-#ifdef __ASSEMBLY__
-
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-#include <asm/macro.h>
-
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- *
- * Default argument values:
- * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
- * user-mode.
- */
-.macro init_aips mpr=0x77777777
- ldr r0, =IMX_AIPS1_BASE
- ldr r1, =\mpr
- str r1, [r0, #AIPS_MPR_0_7]
- str r1, [r0, #AIPS_MPR_8_15]
- ldr r2, =IMX_AIPS2_BASE
- str r1, [r2, #AIPS_MPR_0_7]
- str r1, [r2, #AIPS_MPR_8_15]
-.endm
-
-/*
- * MAX (Multi-Layer AHB Crossbar Switch) setup
- *
- * Default argument values:
- * - MPR: priority is IAHB > DAHB > USBOTG > RTIC > eSDHC2/SDMA
- * - SGPCR: always park on last master
- * - MGPCR: restore default values
- */
-.macro init_max mpr=0x00043210, sgpcr=0x00000010, mgpcr=0x00000000
- ldr r0, =IMX_MAX_BASE
- ldr r1, =\mpr
- str r1, [r0, #MAX_MPR0] /* for S0 */
- str r1, [r0, #MAX_MPR1] /* for S1 */
- str r1, [r0, #MAX_MPR2] /* for S2 */
- str r1, [r0, #MAX_MPR3] /* for S3 */
- str r1, [r0, #MAX_MPR4] /* for S4 */
- ldr r1, =\sgpcr
- str r1, [r0, #MAX_SGPCR0] /* for S0 */
- str r1, [r0, #MAX_SGPCR1] /* for S1 */
- str r1, [r0, #MAX_SGPCR2] /* for S2 */
- str r1, [r0, #MAX_SGPCR3] /* for S3 */
- str r1, [r0, #MAX_SGPCR4] /* for S4 */
- ldr r1, =\mgpcr
- str r1, [r0, #MAX_MGPCR0] /* for M0 */
- str r1, [r0, #MAX_MGPCR1] /* for M1 */
- str r1, [r0, #MAX_MGPCR2] /* for M2 */
- str r1, [r0, #MAX_MGPCR3] /* for M3 */
- str r1, [r0, #MAX_MGPCR4] /* for M4 */
-.endm
-
-/*
- * M3IF setup
- *
- * Default argument values:
- * - CTL:
- * MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001
- * MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000
- * MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000
- * MRRP[3] = USBH not on priority list (0 << 3) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000
- * MRRP[5] = eSDHC1/ATA/FEC not on priority list (0 << 5) = 0x00000000
- * MRRP[6] = LCDC/SLCDC/MAX2 not on priority list (0 << 6) = 0x00000000
- * MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000
- * ------------
- * 0x00000001
- */
-.macro init_m3if ctl=0x00000001
- /* M3IF Control Register (M3IFCTL) */
- write32 IMX_M3IF_CTRL_BASE, \ctl
-.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARM_ARCH_MACRO_H__ */
deleted file mode 100644
@@ -1,23 +0,0 @@
-if ARCH_MX25
-
-config MX25
- bool
- default y
- select SYS_FSL_ERRATUM_ESDHC_A001
-choice
- prompt "MX25 board select"
- optional
-
-config TARGET_ZMX25
- bool "Support zmx25"
- select BOARD_LATE_INIT
- select CPU_ARM926EJS
-
-endchoice
-
-config SYS_SOC
- default "mx25"
-
-source "board/syteco/zmx25/Kconfig"
-
-endif
deleted file mode 100644
@@ -1,15 +0,0 @@
-if TARGET_ZMX25
-
-config SYS_BOARD
- default "zmx25"
-
-config SYS_VENDOR
- default "syteco"
-
-config SYS_SOC
- default "mx25"
-
-config SYS_CONFIG_NAME
- default "zmx25"
-
-endif
deleted file mode 100644
@@ -1,6 +0,0 @@
-ZMX25 BOARD
-M: Matthias Weisser <weisserm@arcor.de>
-S: Maintained
-F: board/syteco/zmx25/
-F: include/configs/zmx25.h
-F: configs/zmx25_defconfig
deleted file mode 100644
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (c) 2010 Graf-Syteco, Matthias Weisser
-# <weisserm@arcor.de>
-
-obj-y += zmx25.o
-obj-y += lowlevel_init.o
deleted file mode 100644
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * Matthias Weisser <weisserm@arcor.de>
- *
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Based on U-Boot and RedBoot sources for several different i.mx
- * platforms.
- */
-
-#include <asm/macro.h>
-#include <asm/arch/macro.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-
-/*
- * clocks
- */
-.macro init_clocks
-
- /* disable clock output */
- write32 IMX_CCM_BASE + CCM_MCR, 0x00000000
- write32 IMX_CCM_BASE + CCM_CCTL, 0x50030000
-
- /*
- * enable all implemented clocks in all three
- * clock control registers
- */
- write32 IMX_CCM_BASE + CCM_CGCR0, 0x1fffffff
- write32 IMX_CCM_BASE + CCM_CGCR1, 0xffffffff
- write32 IMX_CCM_BASE + CCM_CGCR2, 0xfffff
-
- /* Devide NAND clock by 32 */
- write32 IMX_CCM_BASE + CCM_PCDR2, 0x0101011F
-.endm
-
-/*
- * sdram controller init
- */
-.macro init_lpddr
- ldr r0, =IMX_ESDRAMC_BASE
- ldr r2, =IMX_SDRAM_BANK0_BASE
-
- /*
- * reset SDRAM controller
- * then wait for initialization to complete
- */
- ldr r1, =(1 << 1) | (1 << 2)
- str r1, [r0, #ESDRAMC_ESDMISC]
-1: ldr r3, [r0, #ESDRAMC_ESDMISC]
- tst r3, #(1 << 31)
- beq 1b
- ldr r1, =(1 << 2)
- str r1, [r0, #ESDRAMC_ESDMISC]
-
- ldr r1, =0x002a7420
- str r1, [r0, #ESDRAMC_ESDCFG0]
-
- /* control | precharge */
- ldr r1, =0x92216008
- str r1, [r0, #ESDRAMC_ESDCTL0]
- /* dram command encoded in address */
- str r1, [r2, #0x400]
-
- /* auto refresh */
- ldr r1, =0xa2216008
- str r1, [r0, #ESDRAMC_ESDCTL0]
- /* read dram twice to auto refresh */
- ldr r3, [r2]
- ldr r3, [r2]
-
- /* control | load mode */
- ldr r1, =0xb2216008
- str r1, [r0, #ESDRAMC_ESDCTL0]
-
- /* mode register of lpddram */
- strb r1, [r2, #0x33]
-
- /* extended mode register of lpddrram */
- ldr r2, =0x81000000
- strb r1, [r2]
-
- /* control | normal */
- ldr r1, =0x82216008
- str r1, [r0, #ESDRAMC_ESDCTL0]
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
- init_aips
- init_max
- init_clocks
- init_lpddr
- mov pc, lr
deleted file mode 100644
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (c) 2011 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * Based on tx25.c:
- * (C) Copyright 2009 DENX Software Engineering
- * Author: John Rigby <jrigby@gmail.com>
- *
- * Based on imx27lite.c:
- * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net>
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- * And:
- * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat
- */
-#include <common.h>
-#include <cpu_func.h>
-#include <env.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx25.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init()
-{
- static const iomux_v3_cfg_t sdhc1_pads[] = {
- NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
- };
-
- static const iomux_v3_cfg_t dig_out_pads[] = {
- MX25_PAD_CSI_D8__GPIO_1_7, /* Ouput 1 Ctrl */
- MX25_PAD_CSI_D7__GPIO_1_6, /* Ouput 2 Ctrl */
- NEW_PAD_CTRL(MX25_PAD_CSI_D6__GPIO_1_31, 0), /* Ouput 1 Stat */
- NEW_PAD_CTRL(MX25_PAD_CSI_D5__GPIO_1_30, 0), /* Ouput 2 Stat */
- };
-
- static const iomux_v3_cfg_t led_pads[] = {
- MX25_PAD_CSI_D9__GPIO_4_21,
- MX25_PAD_CSI_D4__GPIO_1_29,
- };
-
- static const iomux_v3_cfg_t can_pads[] = {
- NEW_PAD_CTRL(MX25_PAD_GPIO_A__CAN1_TX, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_GPIO_B__CAN1_RX, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_GPIO_C__CAN2_TX, NO_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_GPIO_D__CAN2_RX, NO_PAD_CTRL),
- };
-
- static const iomux_v3_cfg_t i2c3_pads[] = {
- MX25_PAD_CSPI1_SS1__I2C3_DAT,
- MX25_PAD_GPIO_E__I2C3_CLK,
- };
-
- icache_enable();
-
- /* Setup of core voltage selection pin to run at 1.4V */
- imx_iomux_v3_setup_pad(MX25_PAD_EXT_ARMCLK__GPIO_3_15); /* VCORE */
- gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
-
- /* Setup of SD card pins*/
- imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
- /* Setup of digital output for USB power and OC */
- imx_iomux_v3_setup_pad(MX25_PAD_CSI_D3__GPIO_1_28); /* USB Power */
- gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
-
- imx_iomux_v3_setup_pad(MX25_PAD_CSI_D2__GPIO_1_27); /* USB OC */
- gpio_direction_input(IMX_GPIO_NR(1, 18));
-
- /* Setup of digital output control pins */
- imx_iomux_v3_setup_multiple_pads(dig_out_pads,
- ARRAY_SIZE(dig_out_pads));
-
- /* Switch both output drivers off */
- gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
- gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
-
- /* Setup of key input pin */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_KPP_ROW0__GPIO_2_29, 0));
- gpio_direction_input(IMX_GPIO_NR(2, 29));
-
- /* Setup of status LED outputs */
- imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads));
-
- /* Switch both LEDs off */
- gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
- gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
-
- /* Setup of CAN1 and CAN2 signals */
- imx_iomux_v3_setup_multiple_pads(can_pads, ARRAY_SIZE(can_pads));
-
- /* Setup of I2C3 signals */
- imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
-
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- const char *e;
-
-#ifdef CONFIG_FEC_MXC
-/*
- * FIXME: need to revisit this
- * The original code enabled PUE and 100-k pull-down without PKE, so the right
- * value here is likely:
- * 0 for no pull
- * or:
- * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
- */
-#define FEC_OUT_PAD_CTRL 0
-
- static const iomux_v3_cfg_t fec_pads[] = {
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
- NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
-
- MX25_PAD_UPLL_BYPCLK__GPIO_3_16, /* LAN-RESET */
- MX25_PAD_UART2_CTS__FEC_RX_ER, /* FEC_RX_ERR */
- };
-
- imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-
- /* assert PHY reset (low) */
- gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
-
- udelay(5000);
-
- /* deassert PHY reset */
- gpio_set_value(IMX_GPIO_NR(3, 16), 1);
-
- udelay(5000);
-#endif
-
- e = env_get("gs_base_board");
- if (e != NULL) {
- if (strcmp(e, "G283") == 0) {
- int key = gpio_get_value(IMX_GPIO_NR(2, 29));
-
- if (key) {
- /* Switch on both LEDs to inidcate boot mode */
- gpio_set_value(IMX_GPIO_NR(1, 29), 0);
- gpio_set_value(IMX_GPIO_NR(4, 21), 0);
-
- env_set("preboot", "run gs_slow_boot");
- } else
- env_set("preboot", "run gs_fast_boot");
- }
- }
-
- return 0;
-}
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
- PHYS_SDRAM_SIZE);
- return 0;
-}
deleted file mode 100644
@@ -1,38 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX25=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_TARGET_ZMX25=y
-CONFIG_IMX_CONFIG=""
-CONFIG_SYS_MALLOC_LEN=0x3f8000
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_BOOTDELAY=5
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="boot in %d s\n"
-CONFIG_AUTOBOOT_DELAY_STR="delaygs"
-CONFIG_AUTOBOOT_STOP_STR="stopgs"
-CONFIG_USE_PREBOOT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="zmx25> "
-CONFIG_CMD_IMLS=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xA0040000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_LZO=y
@@ -645,7 +645,7 @@ config MCFUART
config MXC_UART
bool "IMX serial port support"
- depends on ARCH_MX25 || ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
+ depends on ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
@@ -20,7 +20,7 @@ config W1_GPIO
config W1_MXC
bool "Enable 1-wire controller on i.MX processors"
- depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5
+ depends on ARCH_MX31 || ARCH_MX5
help
Support the one wire controller found in some members of the NXP
i.MX SoC family.
@@ -24,7 +24,7 @@ config WATCHDOG_AUTOSTART
config WATCHDOG_TIMEOUT_MSECS
int "Watchdog timeout in msec"
- default 128000 if ARCH_MX25 || ARCH_MX31 || ARCH_MX5 || ARCH_MX6
+ default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
default 128000 if ARCH_MX7 || ARCH_VF610
default 30000 if ARCH_SOCFPGA
default 60000
deleted file mode 100644
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (c) 2011 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * Configuation settings for the zmx25 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_SYS_TIMER_RATE 32768
-#define CONFIG_SYS_TIMER_COUNTER \
- (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
-
-/*
- * Environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "gs_fast_boot=setenv bootdelay 5\0" \
- "gs_slow_boot=setenv bootdelay 10\0" \
- "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
- "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
- "bootm 0x81000000; bootelf 0x81000000\0"
-
-/*
- * Hardware drivers
- */
-
-/*
- * Serial
- */
-#define CONFIG_MXC_UART_BASE UART2_BASE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR 0x00
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_MXC
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT 1
-#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL
-#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
-#define CONFIG_EHCI_IS_TDI
-#endif /* CONFIG_CMD_USB */
-
-/* SDRAM */
-#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE 0xA0000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-/*
- * CFI FLASH driver setup
- */
-
-#endif /* __CONFIG_H */
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> --- arch/arm/Kconfig | 9 - arch/arm/include/asm/arch-mx25/clock.h | 57 --- arch/arm/include/asm/arch-mx25/gpio.h | 13 - arch/arm/include/asm/arch-mx25/imx-regs.h | 504 ------------------ arch/arm/include/asm/arch-mx25/iomux-mx25.h | 537 -------------------- arch/arm/include/asm/arch-mx25/macro.h | 90 ---- arch/arm/mach-imx/mx2/Kconfig | 23 - board/syteco/zmx25/Kconfig | 15 - board/syteco/zmx25/MAINTAINERS | 6 - board/syteco/zmx25/Makefile | 7 - board/syteco/zmx25/lowlevel_init.S | 96 ---- board/syteco/zmx25/zmx25.c | 178 ------- configs/zmx25_defconfig | 38 -- drivers/serial/Kconfig | 2 +- drivers/w1/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- include/configs/zmx25.h | 78 --- 17 files changed, 3 insertions(+), 1654 deletions(-) delete mode 100644 arch/arm/include/asm/arch-mx25/clock.h delete mode 100644 arch/arm/include/asm/arch-mx25/gpio.h delete mode 100644 arch/arm/include/asm/arch-mx25/imx-regs.h delete mode 100644 arch/arm/include/asm/arch-mx25/iomux-mx25.h delete mode 100644 arch/arm/include/asm/arch-mx25/macro.h delete mode 100644 arch/arm/mach-imx/mx2/Kconfig delete mode 100644 board/syteco/zmx25/Kconfig delete mode 100644 board/syteco/zmx25/MAINTAINERS delete mode 100644 board/syteco/zmx25/Makefile delete mode 100644 board/syteco/zmx25/lowlevel_init.S delete mode 100644 board/syteco/zmx25/zmx25.c delete mode 100644 configs/zmx25_defconfig delete mode 100644 include/configs/zmx25.h