diff mbox series

[v2,2/2] pinephone_defconfig: add support for early-boot status LED

Message ID 20210908191420.138444-3-arnaud.ferraris@collabora.com
State Accepted
Commit 0534153fd14115cf66d33c2b841c1ac6048aed60
Delegated to: Andre Przywara
Headers show
Series PinePhone: enable LED on boot for improved | expand

Commit Message

Arnaud Ferraris Sept. 8, 2021, 7:14 p.m. UTC 
This commit enables the green status LED (PD18/GPIO 114) on boot in the
SPL, in order to provide visual feedback that the PinePhone is booting.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
Changes in v2:
  - add a Reviewed-by record

 configs/pinephone_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Samuel Holland Sept. 9, 2021, 12:17 a.m. UTC | #1 
On 9/8/21 2:14 PM, Arnaud Ferraris wrote:
> This commit enables the green status LED (PD18/GPIO 114) on boot in the
> SPL, in order to provide visual feedback that the PinePhone is booting.
> 
> Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>

Thanks for the patch!
Samuel
diff mbox series

Patch

diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
index 64e13d3132..9d39204a43 100644
--- a/configs/pinephone_defconfig
+++ b/configs/pinephone_defconfig
@@ -1,6 +1,7 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2"
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
@@ -10,3 +11,8 @@  CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_PINEPHONE_DT_SELECTION=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
+CONFIG_LED_STATUS=y
+CONFIG_LED_STATUS_GPIO=y
+CONFIG_LED_STATUS0=y
+CONFIG_LED_STATUS_BIT=114
+CONFIG_LED_STATUS_STATE=2