diff mbox series

[v3,10/10] verdin-imx8mm: fix watchdog pinctrl issue

Message ID 20210825151441.485419-11-marcel@ziswiler.com
State Superseded
Delegated to: Stefano Babic
Headers show
Series board: toradex: verdin-imx8mm: target refresh | expand

Commit Message

Marcel Ziswiler Aug. 25, 2021, 3:14 p.m. UTC
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Finally, found the root cause of the issue already once mentioned back
here [2] which caused the following error message during boot:

imx_wdt watchdog@30280000:
 pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19

Turns out while the watchdog node itself was already u-boot,dm-spl its
pinctrl node was not which caused it to be unavailable at that early
stage. Note that any and all other boards I checked also seem to be
missing this. However, I can't judge whether or not they might indeed
need a similar fix or not.

[2] https://marc.info/?l=u-boot&m=161786572422973

Fixes: commit d304e7ace3a6
 ("ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>


(no changes since v2)

Changes in v2:
- New patch fixing watchdog pinctrl issue.

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series


diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
index 0e041865021..6962bb40b6e 100644
--- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -68,6 +68,10 @@ 
+&pinctrl_wdog {
+	u-boot,dm-spl;
 &{/soc@0/bus@30800000/i2c@30a20000/pmic} {