Message ID | 20210824184058.84418-1-aford173@gmail.com |
---|---|
State | Deferred |
Delegated to: | Tom Rini |
Headers | show |
Series | [V2,1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks | expand |
On Tue, Aug 24, 2021 at 1:41 PM Adam Ford <aford173@gmail.com> wrote: > > There are two versaclock programmable clock chips used to provide > reference clocks for both USB and Ethernet. Enable the driver > in the configs to run these clocks. > > Signed-off-by: Adam Ford <aford173@gmail.com> > --- Go ahead and drop this now. I have FIT working with multiple DTB's from one config file. I'll push a new series to unify M/N/H boards into one defconfig, then add new the functions to the one remaining board. That should eliminate a lot of duplicated entries. adam > V2: Move from defconfig to kconfig > > diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 > index a6dcce180b..c90ea06692 100644 > --- a/arch/arm/mach-rmobile/Kconfig.64 > +++ b/arch/arm/mach-rmobile/Kconfig.64 > @@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H > select R8A774E1 > select RZ_G2 > select PINCTRL_PFC_R8A774E1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_BEACON_RZG2M > bool "Beacon EmbeddedWorks RZ/G2M Dev Kit" > select R8A774A1 > select RZ_G2 > select PINCTRL_PFC_R8A774A1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_BEACON_RZG2N > bool "Beacon EmbeddedWorks RZ/G2N Dev Kit" > select R8A774B1 > select RZ_G2 > select PINCTRL_PFC_R8A774B1 > + select CLK_CCF > + select CLK_VERSACLOCK > > config TARGET_CONDOR > bool "Condor board" > -- > 2.25.1 >
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index a6dcce180b..c90ea06692 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H select R8A774E1 select RZ_G2 select PINCTRL_PFC_R8A774E1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_BEACON_RZG2M bool "Beacon EmbeddedWorks RZ/G2M Dev Kit" select R8A774A1 select RZ_G2 select PINCTRL_PFC_R8A774A1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_BEACON_RZG2N bool "Beacon EmbeddedWorks RZ/G2N Dev Kit" select R8A774B1 select RZ_G2 select PINCTRL_PFC_R8A774B1 + select CLK_CCF + select CLK_VERSACLOCK config TARGET_CONDOR bool "Condor board"
There are two versaclock programmable clock chips used to provide reference clocks for both USB and Ethernet. Enable the driver in the configs to run these clocks. Signed-off-by: Adam Ford <aford173@gmail.com> --- V2: Move from defconfig to kconfig