@@ -17,12 +17,11 @@
#include <linux/err.h>
#include <phy.h>
#include <cortina.h>
-#ifdef CONFIG_SYS_CORTINA_FW_IN_NAND
#include <nand.h>
-#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
#include <spi_flash.h>
-#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
#include <mmc.h>
+#ifdef CONFIG_ARM64
+#include <asm/arch/cpu.h>
#endif
#ifndef CONFIG_PHYLIB_10G
@@ -124,6 +123,11 @@ struct cortina_reg_config cortina_reg_cfg[] = {
{VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB, 0xc01E},
};
+__weak ulong *cs4340_get_fw_addr(void)
+{
+ return (ulong *)CONFIG_CORTINA_FW_ADDR;
+}
+
void cs4340_upload_firmware(struct phy_device *phydev)
{
char line_temp[0x50] = {0};
@@ -132,22 +136,76 @@ void cs4340_upload_firmware(struct phy_device *phydev)
int i, line_cnt = 0, column_cnt = 0;
struct cortina_reg_config fw_temp;
char *addr = NULL;
+ ulong cortina_fw_addr = (ulong)cs4340_get_fw_addr();
+
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+
+ if (src == BOOT_SOURCE_IFC_NOR) {
+ addr = (char *)cortina_fw_addr;
+ } else if (src == BOOT_SOURCE_IFC_NAND) {
+ int ret;
+ size_t fw_length = CONFIG_CORTINA_FW_LENGTH;
+
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ret = nand_read(get_nand_dev_by_index(0),
+ (loff_t)cortina_fw_addr, &fw_length, (u_char *)addr);
+ if (ret == -EUCLEAN) {
+ printf("NAND read of Cortina firmware at 0x%lx failed %d\n",
+ cortina_fw_addr, ret);
+ }
+ } else if (src == BOOT_SOURCE_QSPI_NOR) {
+ int ret;
+ struct spi_flash *ucode_flash;
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (!ucode_flash) {
+ puts("SF: probe for Cortina ucode failed\n");
+ } else {
+ ret = spi_flash_read(ucode_flash, cortina_fw_addr,
+ CONFIG_CORTINA_FW_LENGTH, addr);
+ if (ret)
+ puts("SF: read for Cortina ucode failed\n");
+ spi_flash_free(ucode_flash);
+ }
+ } else if (src == BOOT_SOURCE_SD_MMC) {
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_CORTINA_FW_LENGTH / 512;
+ u32 blk = cortina_fw_addr / 512;
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ puts("Failed to find MMC device for Cortina ucode\n");
+ } else {
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ printf("MMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+#ifdef CONFIG_BLK
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr);
+#else
+ (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, addr);
+#endif
+ }
+ }
+#else /* CONFIG_TFABOOT */
#if defined(CONFIG_SYS_CORTINA_FW_IN_NOR) || \
defined(CONFIG_SYS_CORTINA_FW_IN_REMOTE)
- addr = (char *)CONFIG_CORTINA_FW_ADDR;
+ addr = (char *)cortina_fw_addr;
#elif defined(CONFIG_SYS_CORTINA_FW_IN_NAND)
int ret;
size_t fw_length = CONFIG_CORTINA_FW_LENGTH;
addr = malloc(CONFIG_CORTINA_FW_LENGTH);
ret = nand_read(get_nand_dev_by_index(0),
- (loff_t)CONFIG_CORTINA_FW_ADDR,
+ (loff_t)cortina_fw_addr,
&fw_length, (u_char *)addr);
if (ret == -EUCLEAN) {
- printf("NAND read of Cortina firmware at 0x%x failed %d\n",
- CONFIG_CORTINA_FW_ADDR, ret);
+ printf("NAND read of Cortina firmware at 0x%lx failed %d\n",
+ cortina_fw_addr, ret);
}
#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
int ret;
@@ -159,7 +217,7 @@ void cs4340_upload_firmware(struct phy_device *phydev)
if (!ucode_flash) {
puts("SF: probe for Cortina ucode failed\n");
} else {
- ret = spi_flash_read(ucode_flash, CONFIG_CORTINA_FW_ADDR,
+ ret = spi_flash_read(ucode_flash, cortina_fw_addr,
CONFIG_CORTINA_FW_LENGTH, addr);
if (ret)
puts("SF: read for Cortina ucode failed\n");
@@ -168,7 +226,7 @@ void cs4340_upload_firmware(struct phy_device *phydev)
#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
int dev = CONFIG_SYS_MMC_ENV_DEV;
u32 cnt = CONFIG_CORTINA_FW_LENGTH / 512;
- u32 blk = CONFIG_CORTINA_FW_ADDR / 512;
+ u32 blk = cortina_fw_addr / 512;
struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
if (!mmc) {
@@ -186,6 +244,7 @@ void cs4340_upload_firmware(struct phy_device *phydev)
addr);
#endif
}
+#endif
#endif
while (*addr != 'Q') {
@@ -195,7 +254,7 @@ void cs4340_upload_firmware(struct phy_device *phydev)
line_temp[i++] = *addr++;
if (0x50 < i) {
printf("Not found Cortina PHY ucode at 0x%p\n",
- (char *)CONFIG_CORTINA_FW_ADDR);
+ (char *)cortina_fw_addr);
return;
}
}
Add support for boards supporting TFA boot separately in cortina firmware. Please note, a weak function is defined to retrieve firmware address values as CONFIG_CORTINA_FW_ADDR is now defined in defconfig and can only have one possible value defined. This weak function will help in overwrting the values to get proper addresses as per boot source. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> --- drivers/net/phy/cortina.c | 79 ++++++++++++++++++++++++++++++++++----- 1 file changed, 69 insertions(+), 10 deletions(-)