@@ -256,6 +256,10 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
/* PCIESKT_WDIS# */
IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
+ /* J7_PWREN */
+ IOMUX_PADS(PAD_EIM_DA15__GPIO3_IO15 | DIO_PAD_CFG),
+ /* PCIEGBE_EN */
+ IOMUX_PADS(PAD_EIM_DA14__GPIO3_IO14 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw551x_gpio_pads[] = {
@@ -1236,6 +1240,12 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
gpio_request(IMX_GPIO_NR(3, 14), "gbe_en");
gpio_direction_output(IMX_GPIO_NR(3, 14), 1);
break;
+ case GW54xx:
+ gpio_request(IMX_GPIO_NR(3, 15), "j7_pwren");
+ gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
+ gpio_request(IMX_GPIO_NR(3, 14), "gbe_en");
+ gpio_direction_output(IMX_GPIO_NR(3, 14), 1);
+ break;
case GW560x:
gpio_request(IMX_GPIO_NR(4, 26), "12p0_en");
gpio_direction_output(IMX_GPIO_NR(4, 26), 1);
@@ -1677,6 +1687,15 @@ void ft_early_fixup(void *blob, int board_type)
/* GW54xx-E adds WDOG2_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG2_ADDR);
+
+ /* GW54xx-G has an adv7280 instead of an adv7180 */
+ else if (rev > 'F') {
+ i = fdt_node_offset_by_compatible(blob, -1, "adi,adv7180");
+ if (i) {
+ fdt_setprop_string(blob, i, "compatible", "adi,adv7280");
+ fdt_setprop_empty(blob, i, "adv,force-bt656-4");
+ }
+ }
break;
case GW551x:
The GW54xx-G revision has the foolowing changes: - replaces the EOL GbE PHY with an updated part (requires an enable pin) - replaces the EOL analog video decoder with an updated part (requires dt prop) - add power control to miniPCIe socket Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- board/gateworks/gw_ventana/common.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)