@@ -1,6 +1,6 @@
.. SPDX-License-Identifier: GPL-2.0+
-Colibri iMX8QXP V1.0B Module
+Colibri iMX8QXP V1.0D Module
============================
Quick Start
@@ -18,34 +18,23 @@ Get and Build the ARM Trusted Firmware
.. code-block:: bash
- $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
- $ cd imx-atf/
- $ make PLAT=imx8qxp bl31
+ $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git/
+ $ make PLAT=imx8qx bl31 -C imx-atf
Get scfw_tcm.bin and ahab-container.img
---------------------------------------
.. code-block:: bash
- $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/
- toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
- bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
- $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
- $ chmod +x firmware-imx-8.0.bin
- $ ./firmware-imx-8.0.bin
-
-Copy the following binaries to the U-Boot folder:
-
-.. code-block:: bash
-
- $ cp imx-atf/build/imx8qxp/release/bl31.bin .
- $ cp u-boot/u-boot.bin .
+ $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
+ $ sh imx-seco-3.7.4.bin --auto-accept
Copy the following firmware to the U-Boot folder:
.. code-block:: bash
- $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
+ $ cp imx-atf/build/imx8qx/release/bl31.bin .
+ $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img
Build U-Boot
------------
Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None doc/board/toradex/colibri-imx8x.rst | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-)