@@ -17,19 +17,65 @@
model = "FriendlyElec NanoPi R4S";
compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
- aliases {
- ethernet1 = &r8169;
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8_s3";
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sys";
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys";
+ vin-supply = <&vdd_5v>;
};
vdd_5v: vdd-5v {
compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
regulator-always-on;
regulator-boot-on;
+ regulator-name = "vdd_5v";
};
fan: pwm-fan {
compatible = "pwm-fan";
+ /*
+ * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+ * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+ */
cooling-levels = <0 12 18 255>;
#cooling-cells = <2>;
fan-supply = <&vdd_5v>;
@@ -73,40 +119,39 @@
status = "disabled";
};
+&i2c4 {
+ status = "disabled";
+};
+
&leds {
lan_led: led-1 {
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:lan";
+ label = "green:lan";
+ };
+
+ sys_led: led-sys {
+ default-state = "on";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ label = "red:sys";
};
wan_led: led-2 {
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:wan";
+ label = "green:wan";
};
};
&leds_gpio {
rockchip,pins =
- <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
&pcie0 {
max-link-speed = <1>;
num-lanes = <1>;
vpcie3v3-supply = <&vcc3v3_sys>;
-
- pcie@0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- r8169: pcie@0,0 {
- reg = <0x000000 0 0 0 0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
};
&sdhci {
@@ -132,7 +177,3 @@
&usbdrd_dwc3_0 {
dr_mode = "host";
};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_sys>;
-};