diff mbox series

[1/2] usb: ehci-mx6: Move fdtdec_get_alias_seq() inside the CONFIG_MX6

Message ID 20210620150052.1628256-1-festevam@denx.de
State Accepted
Commit ec326b932512cfe07dd97cc45480c87b903e08e3
Delegated to: Stefano Babic
Headers show
Series [1/2] usb: ehci-mx6: Move fdtdec_get_alias_seq() inside the CONFIG_MX6 | expand

Commit Message

Fabio Estevam June 20, 2021, 3 p.m. UTC
On a imx7s-warp board the fdtdec_get_alias_seq() function 
always fails.

As priv->portnr is only used on i.MX6, move fdtdec_get_alias_seq()
inside the CONFIG_MX6 block.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 drivers/usb/host/ehci-mx6.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 238c93183b05..48b5c8b0c53c 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -569,7 +569,6 @@  static int mx6_parse_dt_addrs(struct udevice *dev)
 	const void *blob = gd->fdt_blob;
 	int offset = dev_of_offset(dev);
 	void *__iomem addr;
-	int ret, devnump;
 
 	phy_off = fdtdec_lookup_phandle(blob, offset, "fsl,usbphy");
 	if (phy_off < 0) {
@@ -578,11 +577,6 @@  static int mx6_parse_dt_addrs(struct udevice *dev)
 			return -EINVAL;
 	}
 
-	ret = fdtdec_get_alias_seq(blob, dev->uclass->uc_drv->name,
-				   phy_off, &devnump);
-	if (ret < 0)
-		return ret;
-
 	misc_off = fdtdec_lookup_phandle(blob, offset, "fsl,usbmisc");
 	if (misc_off < 0)
 		return -EINVAL;
@@ -592,7 +586,6 @@  static int mx6_parse_dt_addrs(struct udevice *dev)
 		return -EINVAL;
 
 	priv->phy_addr = addr;
-	priv->portnr = devnump;
 
 	addr = (void __iomem *)fdtdec_get_addr(blob, misc_off, "reg");
 	if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)
@@ -601,7 +594,13 @@  static int mx6_parse_dt_addrs(struct udevice *dev)
 	priv->misc_addr = addr;
 
 #if defined(CONFIG_MX6)
-	int anatop_off;
+	int anatop_off, ret, devnump;
+
+	ret = fdtdec_get_alias_seq(blob, dev->uclass->uc_drv->name,
+				   phy_off, &devnump);
+	if (ret < 0)
+		return ret;
+	priv->portnr = devnump;
 
 	/* Resolve ANATOP offset through USB PHY node */
 	anatop_off = fdtdec_lookup_phandle(blob, phy_off, "fsl,anatop");