diff mbox series

Nokia RX-51: Update documentation about ext2/3/4

Message ID 20210618132844.32153-1-pali@kernel.org
State Changes Requested
Delegated to: Lokesh Vutla
Headers show
Series Nokia RX-51: Update documentation about ext2/3/4 | expand

Commit Message

Pali Rohár June 18, 2021, 1:28 p.m. UTC
Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load
and ext4load") command ext4load is used for all ext2/3/4 fs variants.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 doc/README.nokia_rx51 | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Tom Rini June 18, 2021, 5:07 p.m. UTC | #1
On Fri, Jun 18, 2021 at 03:28:44PM +0200, Pali Rohár wrote:

> Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load
> and ext4load") command ext4load is used for all ext2/3/4 fs variants.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>  doc/README.nokia_rx51 | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)

Can you please convert this to rST and move it under doc/board/ ?
Thanks!
Pali Rohár July 21, 2021, 9:28 p.m. UTC | #2
On Friday 18 June 2021 13:07:08 Tom Rini wrote:
> On Fri, Jun 18, 2021 at 03:28:44PM +0200, Pali Rohár wrote:
> 
> > Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load
> > and ext4load") command ext4load is used for all ext2/3/4 fs variants.
> > 
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > ---
> >  doc/README.nokia_rx51 | 5 ++---
> >  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> Can you please convert this to rST and move it under doc/board/ ?
> Thanks!

Done, here is link to patch:
http://patchwork.ozlabs.org/project/uboot/patch/20210721212507.27145-1-pali@kernel.org/
diff mbox series

Patch

diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
index 7f22ed49bd75..1be077514f03 100644
--- a/doc/README.nokia_rx51
+++ b/doc/README.nokia_rx51
@@ -44,8 +44,7 @@  Boot from SD or eMMC in this order:
    * 1.2 find uImage on first fat partition
    * 1.3 find zImage on first fat partition
    * 1.4 same order for 2. - 4. fat partition
- * 2. same as 1. but for ext2/3 partition
- * 3. same as 1. but for ext4 partition
+ * 2. same as 1. but for ext2/3/4 partition
 
 
 Available additional commands/variables:
@@ -70,7 +69,7 @@  Additional variables for loading files from mmc:
 
  * mmc ${mmcnum} (0 - external, 1 - internal)
  * partition number ${mmcpart} (1 - 4)
- * parition type ${mmctype} (fat, ext2, ext4)
+ * partition type ${mmctype} (fat, ext2, ext4; ext2 is just alias for ext4)
 
 Additional variables for booting kernel: