diff mbox series

[v3,08/11] clk: k210: Move k210 clock out of its own subdirectory

Message ID 20210611041617.1665833-9-seanga2@gmail.com
State Accepted
Commit 493110cc499539f42a2786e8306ba29ac0ba2435
Delegated to: Andes
Headers show
Series clk: k210: Rewrite K210 clock without CCF | expand

Commit Message

Sean Anderson June 11, 2021, 4:16 a.m. UTC 
Now that we have only one clock driver, we don't need to have our own
subdirectory. Move the driver back with the rest of the clock drivers.

The MAINTAINERS for kendryte pinctrl is also fixed since it has always been
wrong.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
---

(no changes since v1)

 MAINTAINERS                                    |  4 ++--
 drivers/clk/Kconfig                            | 14 +++++++++++++-
 drivers/clk/Makefile                           |  2 +-
 drivers/clk/{kendryte/clk.c => clk_kendryte.c} |  0
 drivers/clk/kendryte/Kconfig                   | 12 ------------
 drivers/clk/kendryte/Makefile                  |  1 -
 6 files changed, 16 insertions(+), 17 deletions(-)
 rename drivers/clk/{kendryte/clk.c => clk_kendryte.c} (100%)
 delete mode 100644 drivers/clk/kendryte/Kconfig
 delete mode 100644 drivers/clk/kendryte/Makefile

Comments

Leo Liang June 16, 2021, 2:01 a.m. UTC | #1 
On Fri, Jun 11, 2021 at 12:16:14PM +0800, Sean Anderson wrote:
> Now that we have only one clock driver, we don't need to have our own
> subdirectory. Move the driver back with the rest of the clock drivers.
> 
> The MAINTAINERS for kendryte pinctrl is also fixed since it has always been
> wrong.
> 
> Signed-off-by: Sean Anderson <seanga2@gmail.com>
> ---
> 
> (no changes since v1)
> 
>  MAINTAINERS                                    |  4 ++--
>  drivers/clk/Kconfig                            | 14 +++++++++++++-
>  drivers/clk/Makefile                           |  2 +-
>  drivers/clk/{kendryte/clk.c => clk_kendryte.c} |  0
>  drivers/clk/kendryte/Kconfig                   | 12 ------------
>  drivers/clk/kendryte/Makefile                  |  1 -
>  6 files changed, 16 insertions(+), 17 deletions(-)
>  rename drivers/clk/{kendryte/clk.c => clk_kendryte.c} (100%)
>  delete mode 100644 drivers/clk/kendryte/Kconfig
>  delete mode 100644 drivers/clk/kendryte/Makefile

Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 86ff5e04a6..effcf5469d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -999,8 +999,8 @@  M:	Sean Anderson <seanga2@gmail.com>
 S:	Maintained
 F:	doc/device-tree-bindings/mfd/kendryte,k210-sysctl.txt
 F:	doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
-F:	drivers/clk/kendryte/
-F:	drivers/pinctrl/kendryte/
+F:	drivers/clk/clk_kendryte.c
+F:	drivers/pinctrl/pinctrl-kendryte.c
 F:	include/kendryte/
 
 RNG
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 40a5a5dd88..4bc6680121 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -159,11 +159,23 @@  config CLK_SCMI
 	  by a SCMI agent based on SCMI clock protocol communication
 	  with a SCMI server.
 
+config CLK_K210
+	bool "Clock support for Kendryte K210"
+	depends on CLK
+	help
+	  This enables support clock driver for Kendryte K210 platforms.
+
+config CLK_K210_SET_RATE
+	bool "Enable setting the Kendryte K210 PLL rate"
+	depends on CLK_K210
+	help
+	  Add functionality to calculate new rates for K210 PLLs. Enabling this
+	  feature adds around 1K to U-Boot's final size.
+
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/at91/Kconfig"
 source "drivers/clk/exynos/Kconfig"
 source "drivers/clk/imx/Kconfig"
-source "drivers/clk/kendryte/Kconfig"
 source "drivers/clk/meson/Kconfig"
 source "drivers/clk/microchip/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 645709b855..f06164bb49 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,7 +28,7 @@  obj-$(CONFIG_CLK_BOSTON) += clk_boston.o
 obj-$(CONFIG_CLK_EXYNOS) += exynos/
 obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/
 obj-$(CONFIG_CLK_HSDK) += clk-hsdk-cgu.o
-obj-$(CONFIG_CLK_K210) += kendryte/
+obj-$(CONFIG_CLK_K210) += clk_kendryte.o
 obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o
 obj-$(CONFIG_CLK_MPFS) += microchip/
 obj-$(CONFIG_CLK_OCTEON) += clk_octeon.o
diff --git a/drivers/clk/kendryte/clk.c b/drivers/clk/clk_kendryte.c
similarity index 100%
rename from drivers/clk/kendryte/clk.c
rename to drivers/clk/clk_kendryte.c
diff --git a/drivers/clk/kendryte/Kconfig b/drivers/clk/kendryte/Kconfig
deleted file mode 100644
index 0dc8e3f889..0000000000
--- a/drivers/clk/kendryte/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@ 
-config CLK_K210
-	bool "Clock support for Kendryte K210"
-	depends on CLK
-	help
-	  This enables support clock driver for Kendryte K210 platforms.
-
-config CLK_K210_SET_RATE
-	bool "Enable setting the Kendryte K210 PLL rate"
-	depends on CLK_K210
-	help
-	  Add functionality to calculate new rates for K210 PLLs. Enabling this
-	  feature adds around 1K to U-Boot's final size.
diff --git a/drivers/clk/kendryte/Makefile b/drivers/clk/kendryte/Makefile
deleted file mode 100644
index 0303c0b99c..0000000000
--- a/drivers/clk/kendryte/Makefile
+++ /dev/null
@@ -1 +0,0 @@ 
-obj-y += clk.o