diff mbox series

[RESEND,2/6] spi: fsl_qspi: Build driver only if DM_SPI is available

Message ID 20210607123707.189163-3-frieder@fris.de
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show
Series Add support for Kontron i.MX6UL/ULL and i.MX8MM modules/boards | expand

Commit Message

Frieder Schrempf June 7, 2021, 12:36 p.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The driver depends on DM_SPI and if it's not available (e. g. in SPL),
then we should not try to build it as this will fail.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/spi/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Stefano Babic July 10, 2021, 3:52 p.m. UTC | #1 
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> The driver depends on DM_SPI and if it's not available (e. g. in SPL),
> then we should not try to build it as this will fail.
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
Stefano Babic July 10, 2021, 7:35 p.m. UTC | #2 
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> The driver depends on DM_SPI and if it's not available (e. g. in SPL),
> then we should not try to build it as this will fail.
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cfe4fae1d4..2eb9267ce9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,6 +11,7 @@  obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem.o
 obj-$(CONFIG_TI_QSPI) += ti_qspi.o
+obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
 else
 obj-y += spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -30,7 +31,6 @@  obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
 obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
 obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
 obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
-obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
 obj-$(CONFIG_ICH_SPI) +=  ich.o
 obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
 obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o