diff mbox series

riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT

Message ID 20210604230030.19510-1-bmeng.cn@gmail.com
State Accepted
Commit 279de759bd2ceb1dad6ff30c7d27c8ff9c5706a3
Delegated to: Andes
Headers show
Series riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT | expand

Commit Message

Bin Meng June 4, 2021, 11 p.m. UTC 
The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while
actually it is not. Remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 doc/board/AndesTech/ax25-ae350.rst | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

Comments

Rick Chen June 7, 2021, 3:06 a.m. UTC | #1 
> From: Bin Meng <bmeng.cn@gmail.com>
> Sent: Saturday, June 05, 2021 7:01 AM
> To: Rick Jian-Zhi Chen(陳建志) <rick@andestech.com>; Leo Yu-Chi Liang(梁育齊) <ycliang@andestech.com>; u-boot@lists.denx.de
> Cc: Bin Meng <bmeng.cn@gmail.com>
> Subject: [PATCH] riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT
>
> The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while actually it is not. Remove it.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> ---
>
>  doc/board/AndesTech/ax25-ae350.rst | 19 ++++---------------
>  1 file changed, 4 insertions(+), 15 deletions(-)

Reviewed-by: Rick Chen <rick@andestech.com>
diff mbox series

Patch

diff --git a/doc/board/AndesTech/ax25-ae350.rst b/doc/board/AndesTech/ax25-ae350.rst
index 923649240e..b46f427f4b 100644
--- a/doc/board/AndesTech/ax25-ae350.rst
+++ b/doc/board/AndesTech/ax25-ae350.rst
@@ -58,15 +58,6 @@  Platform Level Interrupt Controller (PLIC)
  - Configurable number of targets:  1-16
  - Preempted interrupt priority stack
 
-Configurations
---------------
-
-CONFIG_SKIP_LOWLEVEL_INIT:
-
-If you want to boot this system from SPI ROM and bypass e-bios (the
-other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
-in "include/configs/ax25-ae350.h".
-
 Build and boot steps
 --------------------
 
@@ -89,12 +80,10 @@  Verification:
 Steps
 -----
 
-1. Define CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is loaded via gdb from ram.
-2. Undefine CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is booted from spi rom.
-3. Ping a server by mac driver
-4. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver.
-5. Burn this u-boot image to spi rom by spi driver
-6. Re-boot u-boot from spi flash with power off and power on.
+1. Ping a server by mac driver
+2. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver
+3. Burn this u-boot image to spi rom by spi driver
+4. Re-boot u-boot from spi flash with power off and power on
 
 Messages of U-Boot boot on AE350 board
 --------------------------------------