@@ -428,10 +428,14 @@
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x6>;
ti,otap-del-sel-hs200 = <0x8>;
- ti,otap-del-sel-hs400 = <0x0>;
+ ti,otap-del-sel-hs400 = <0x5>;
+ ti,itap-del-sel-legacy = <0x10>;
+ ti,itap-del-sel-mmc-hs = <0xa>;
ti,strobe-sel = <0x77>;
+ ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x8>;
bus-width = <8>;
+ mmc-hs400-1_8v;
mmc-hs200-1_8v;
mmc-ddr-1_8v;
dma-coherent;
@@ -451,7 +455,12 @@
ti,otap-del-sel-sdr50 = <0xc>;
ti,otap-del-sel-sdr104 = <0x5>;
ti,otap-del-sel-ddr50 = <0xc>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
ti,clkbuf-sel = <0x7>;
+ ti,trm-icp = <0x8>;
dma-coherent;
};
HS400 speed mode is now supported in J7200 SoC[1]. Therefore add mmc-hs400-1_8v tag in sdhci0 device tree node. Also update the delay values for various speed modes supported, based on the revised january 2021 J7200 datasheet[2]. [1] - section 12.3.6.1.1 MMCSD Features, in https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf, (SPRUIU1A – JULY 2020 – REVISED JANUARY 2021) [2] - https://www.ti.com/lit/ds/symlink/dra821u.pdf, (SPRSP57B – APRIL 2020 – REVISED JANUARY 2021) Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> --- arch/arm/dts/k3-j7200-main.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)