@@ -1,43 +1,46 @@
.. SPDX-License-Identifier: GPL-2.0+
-Apalis iMX8X V1.1A Module
+Apalis iMX8X V1.1B Module (SoC NXP i.MX8QXP RevC)
==========================
Quick Start
-----------
-- Build the ARM trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
+- Get and Build the ARM trusted firmware
+- Get System Controller firmware
+- Get SECO container
- Build U-Boot
- Load U-Boot binary using uuu
- Flash U-Boot binary into the eMMC
- Boot
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
+
Get and Build the ARM Trusted Firmware
--------------------------------------
.. code-block:: bash
- $ git clone -b toradex_imx_5.4.24_2.1.0 http://git.toradex.com/cgit/imx-atf.git
- $ cd imx-atf/
- $ make PLAT=imx8qx bl31
+ $ cd $(builddir)
+ $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
+ $ make PLAT=imx8qx bl31 -C imx-atf
+ $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
-Get scfw_tcm.bin and ahab-container.img
+Get System Controller firmware
---------------------------------------
.. code-block:: bash
- $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/blob/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.6.3.bin
- $ chmod +x imx-seco-3.6.3.bin
- $ ./imx-seco-3.6.3.bin
+ $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
-Copy the following binaries to the U-Boot folder:
+Get SECO container
+---------------------------------------
.. code-block:: bash
- $ cp imx-atf/build/imx8qx/release/bl31.bin .
- $ cp imx-seco-3.6.3/firmware/seco/mx8qxb0-ahab-container.img mx8qx-ahab-container.imx8_defconfig
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
+ $ sh imx-seco-3.7.4.bin
+ $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
Build U-Boot
------------
@@ -58,7 +61,7 @@ to your host and execute uuu:
.. code-block:: bash
- sudo ./uuu u-boot/u-boot-dtb.imx
+ sudo ./uuu $(builddir)/u-boot-dtb.imx
Flash the U-Boot Binary into the eMMC
-------------------------------------
Improve and update u-boot image build instructions to support the module Apalis iMX8X V1.1B. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: - Update instructions to support the latest Apalis iMX8X V1.1B - Change the commit message doc/board/toradex/apalix-imx8x.rst | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-)