diff mbox series

[1/2] gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banks

Message ID 20210407083929.287218-1-eugen.hristev@microchip.com
State Accepted
Delegated to: Eugen Hristev
Headers show
Series [1/2] gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banks | expand

Commit Message

Eugen Hristev April 7, 2021, 8:39 a.m. UTC 
Add support for sama7g5 pinctrl variant, with 5 banks with a degraded
8 line only 5th bank.
Based on Linux Kernel implementation.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 drivers/gpio/atmel_pio4.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Eugen Hristev April 19, 2021, 7:41 a.m. UTC | #1 
On 4/7/21 11:39 AM, Eugen Hristev wrote:
> Add support for sama7g5 pinctrl variant, with 5 banks with a degraded
> 8 line only 5th bank.
> Based on Linux Kernel implementation.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
>   drivers/gpio/atmel_pio4.c | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 

Applied both to u-boot-atmel/master
diff mbox series

Patch

diff --git a/drivers/gpio/atmel_pio4.c b/drivers/gpio/atmel_pio4.c
index f615fce32e..bea609db9d 100644
--- a/drivers/gpio/atmel_pio4.c
+++ b/drivers/gpio/atmel_pio4.c
@@ -173,8 +173,15 @@  int atmel_pio4_get_pio_input(u32 port, u32 pin)
 
 #if CONFIG_IS_ENABLED(DM_GPIO)
 
+/**
+ * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct
+ * @nbanks: number of PIO banks
+ * @last_bank_count: number of lines in the last bank (can be less than
+ *     the rest of the banks).
+ */
 struct atmel_pioctrl_data {
 	u32 nbanks;
+	u32 last_bank_count;
 };
 
 struct atmel_pio4_plat {
@@ -313,6 +320,12 @@  static int atmel_pio4_probe(struct udevice *dev)
 					  NULL);
 	uc_priv->gpio_count = nbanks * ATMEL_PIO_NPINS_PER_BANK;
 
+	/* if last bank has limited number of pins, adjust accordingly */
+	if (pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) {
+		uc_priv->gpio_count -= ATMEL_PIO_NPINS_PER_BANK;
+		uc_priv->gpio_count += pioctrl_data->last_bank_count;
+	}
+
 	return 0;
 }
 
@@ -322,12 +335,21 @@  static int atmel_pio4_probe(struct udevice *dev)
  */
 static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
 	.nbanks	= 4,
+	.last_bank_count = ATMEL_PIO_NPINS_PER_BANK,
+};
+
+static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
+	.nbanks	= 5,
+	.last_bank_count = 8, /* 5th bank has only 8 lines on sama7g5 */
 };
 
 static const struct udevice_id atmel_pio4_ids[] = {
 	{
 		.compatible = "atmel,sama5d2-gpio",
 		.data = (ulong)&atmel_sama5d2_pioctrl_data,
+	}, {
+		.compatible = "microchip,sama7g5-gpio",
+		.data = (ulong)&microchip_sama7g5_pioctrl_data,
 	},
 	{}
 };