diff mbox series

[16/37] imx: HAB: Add support for iMX8MM

Message ID 20210325093036.3270101-17-peng.fan@oss.nxp.com
State Accepted
Commit 2c0dcc5de6416510e8365f5e37de46c7a98d9a7e
Delegated to: Stefano Babic
Headers show
Series imx: hab/caam new feature and update | expand

Commit Message

Peng Fan (OSS) March 25, 2021, 9:30 a.m. UTC 
From: Ye Li <ye.li@nxp.com>

The imx8mm has changed the address of rvt_hab, use new address for imx8mm.

The authentication procedure is same as imx8mq. In u-boot, the authentication
uses SIP call to trap ATF to run HAB authenticate.

Users need to add CONFIG_SECURE_BOOT=y to defconfig to enable the feature.

Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm/include/asm/mach-imx/hab.h | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/include/asm/mach-imx/hab.h b/arch/arm/include/asm/mach-imx/hab.h
index 1085c37828..d63b85378a 100644
--- a/arch/arm/include/asm/mach-imx/hab.h
+++ b/arch/arm/include/asm/mach-imx/hab.h
@@ -173,7 +173,11 @@  typedef void hapi_clock_init_t(void);
 #define HAB_ENG_SW		0xff   /* Software engine */
 
 #ifdef CONFIG_ARM64
+#ifdef CONFIG_IMX8MQ
 #define HAB_RVT_BASE                   0x00000880
+#else
+#define HAB_RVT_BASE                   0x00000900
+#endif
 
 #define HAB_RVT_ENTRY			(*(ulong *)(HAB_RVT_BASE + 0x08))
 #define HAB_RVT_EXIT			(*(ulong *)(HAB_RVT_BASE + 0x10))