diff mbox series

[37/57] arm: Remove titanium board

Message ID 20210221010634.21310-38-trini@konsulko.com
State Accepted
Commit defd0dcfb9de21f11259ffbaf49728d12eba86e0
Delegated to: Tom Rini
Headers show
Series Enforce DM_MMC migration and remove platforms | expand

Commit Message

Tom Rini Feb. 21, 2021, 1:06 a.m. UTC
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/mach-imx/mx6/Kconfig     |   5 -
 board/barco/titanium/Kconfig      |  12 --
 board/barco/titanium/MAINTAINERS  |   6 -
 board/barco/titanium/Makefile     |   7 -
 board/barco/titanium/imximage.cfg | 166 ----------------
 board/barco/titanium/titanium.c   | 320 ------------------------------
 configs/titanium_defconfig        |  55 -----
 include/configs/titanium.h        | 151 --------------
 8 files changed, 722 deletions(-)
 delete mode 100644 board/barco/titanium/Kconfig
 delete mode 100644 board/barco/titanium/MAINTAINERS
 delete mode 100644 board/barco/titanium/Makefile
 delete mode 100644 board/barco/titanium/imximage.cfg
 delete mode 100644 board/barco/titanium/titanium.c
 delete mode 100644 configs/titanium_defconfig
 delete mode 100644 include/configs/titanium.h

Comments

Tom Rini April 12, 2021, 12:27 a.m. UTC | #1
On Sat, Feb 20, 2021 at 08:06:14PM -0500, Tom Rini wrote:

> This board has not been converted to CONFIG_DM_MMC by the deadline.
> Remove it.
> 
> Cc: Stefan Roese <sr@denx.de>
> Signed-off-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 5b29a700eb7d..de1588735f69 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -547,10 +547,6 @@  config TARGET_TBS2910
 	bool "TBS2910 Matrix ARM mini PC"
 	depends on MX6Q
 
-config TARGET_TITANIUM
-	bool "titanium"
-	depends on MX6Q
-
 config TARGET_KP_IMX6Q_TPC
 	bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
 	depends on MX6QDL
@@ -629,7 +625,6 @@  source "board/ge/bx50v3/Kconfig"
 source "board/ge/b1x5v2/Kconfig"
 source "board/aristainetos/Kconfig"
 source "board/armadeus/opos6uldev/Kconfig"
-source "board/barco/titanium/Kconfig"
 source "board/boundary/nitrogen6x/Kconfig"
 source "board/bticino/mamoj/Kconfig"
 source "board/compulab/cm_fx6/Kconfig"
diff --git a/board/barco/titanium/Kconfig b/board/barco/titanium/Kconfig
deleted file mode 100644
index 21bc36e004f0..000000000000
--- a/board/barco/titanium/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@ 
-if TARGET_TITANIUM
-
-config SYS_BOARD
-	default "titanium"
-
-config SYS_VENDOR
-	default "barco"
-
-config SYS_CONFIG_NAME
-	default "titanium"
-
-endif
diff --git a/board/barco/titanium/MAINTAINERS b/board/barco/titanium/MAINTAINERS
deleted file mode 100644
index 7e9913ffa670..000000000000
--- a/board/barco/titanium/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@ 
-TITANIUM BOARD
-M:	Stefan Roese <sr@denx.de>
-S:	Maintained
-F:	board/barco/titanium/
-F:	include/configs/titanium.h
-F:	configs/titanium_defconfig
diff --git a/board/barco/titanium/Makefile b/board/barco/titanium/Makefile
deleted file mode 100644
index 6bc5c134f639..000000000000
--- a/board/barco/titanium/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-
-obj-y  := titanium.o
diff --git a/board/barco/titanium/imximage.cfg b/board/barco/titanium/imximage.cfg
deleted file mode 100644
index 1fc26ed2c940..000000000000
--- a/board/barco/titanium/imximage.cfg
+++ /dev/null
@@ -1,166 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Projectiondesign AS
- * Derived from ./board/freescale/mx6qsabrelite/imximage.cfg
- *
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- * Jason Liu <r64343@freescale.com>
- *
- * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * sd, nand
- */
-BOOT_FROM      nand
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type           Address        Value
- *
- * where:
- *      Addr-type register length (1,2 or 4 bytes)
- *      Address   absolute address of the register
- *      value     value to be stored in the register
- */
-
-#define __ASSEMBLY__
-#include <config.h>
-#include "asm/arch/mx6-ddr.h"
-#include "asm/arch/iomux.h"
-#include "asm/arch/crm_regs.h"
-
-DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
-DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
-
-DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
-DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
-
-DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
-DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
-
-DATA 4, MX6_IOM_DRAM_RESET, 0x00020030
-DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
-DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
-
-DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-
-DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
-DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
-
-DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
-DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
-DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
-
-/* (differential input) */
-DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-/* disable ddr pullups */
-DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-/* (differential input) */
-DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
-/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-
-/* Read data DQ Byte0-3 delay */
-DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-
-/*
- * MDMISC	mirroring	interleaved (row/bank/col)
- */
-DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
-
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
-DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7975
-DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF538E64
-DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-DATA 4, MX6_MMDC_P0_MDOR, 0x005B0E21
-DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
-DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
-DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
-DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
-DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803A
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803B
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00428039
-DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030
-DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048
-DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1380003
-DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1380003
-DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
-DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
-DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x434B0350
-DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x034C0359
-DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x434B0350
-DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03650348
-DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4436383B
-DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x39393341
-DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x35373933
-DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x48254A36
-DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
-DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00440044
-DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00440044
-DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
-
-/* set the default clock gate to save power */
-DATA 4, CCM_CCGR0, 0x00C03F3F
-DATA 4, CCM_CCGR1, 0x0030FC03
-DATA 4, CCM_CCGR2, 0x0FFFC000
-DATA 4, CCM_CCGR3, 0x3FF00000
-DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */
-DATA 4, CCM_CCGR5, 0x0F0000C3
-DATA 4, CCM_CCGR6, 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
-DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
diff --git a/board/barco/titanium/titanium.c b/board/barco/titanium/titanium.c
deleted file mode 100644
index efd1dc35ef4c..000000000000
--- a/board/barco/titanium/titanium.c
+++ /dev/null
@@ -1,320 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Stefan Roese <sr@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <micrel.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	\
-			PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |	\
-			PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED	  |	\
-			PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
-
-#define I2C_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	\
-			 PAD_CTL_DSE_40ohm | PAD_CTL_HYS |		\
-			 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-iomux_v3_cfg_t const uart1_pads[] = {
-	MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const uart2_pads[] = {
-	MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const uart4_pads[] = {
-	MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-struct i2c_pads_info i2c_pad_info0 = {
-	.scl = {
-		.i2c_mode  = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
-		.gp = IMX_GPIO_NR(5, 27)
-	},
-	.sda = {
-		 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
-		 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
-		 .gp = IMX_GPIO_NR(5, 26)
-	 }
-};
-
-struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
-		.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
-		.gp = IMX_GPIO_NR(1, 3)
-	},
-	.sda = {
-		 .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
-		 .gpio_mode = MX6_PAD_GPIO_16__GPIO7_IO11 | PC,
-		 .gp = IMX_GPIO_NR(7, 11)
-	 }
-};
-
-iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__SD3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_CMD__SD3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT5__GPIO7_IO00    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const enet_pads1[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__RGMII_TD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__RGMII_TD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__RGMII_TD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__RGMII_TD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	/* pin 35 - 1 (PHY_AD2) on reset */
-	MX6_PAD_RGMII_RXC__GPIO6_IO30		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 32 - 1 - (MODE0) all */
-	MX6_PAD_RGMII_RD0__GPIO6_IO25		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 31 - 1 - (MODE1) all */
-	MX6_PAD_RGMII_RD1__GPIO6_IO27		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 28 - 1 - (MODE2) all */
-	MX6_PAD_RGMII_RD2__GPIO6_IO28		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 27 - 1 - (MODE3) all */
-	MX6_PAD_RGMII_RD3__GPIO6_IO29		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
-	MX6_PAD_RGMII_RX_CTL__GPIO6_IO24		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* pin 42 PHY nRST */
-	MX6_PAD_EIM_D23__GPIO3_IO23		| MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const enet_pads2[] = {
-	MX6_PAD_RGMII_RXC__RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD1__RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD2__RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-iomux_v3_cfg_t nfc_pads[] = {
-	MX6_PAD_NANDF_CLE__NAND_CLE		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_ALE__NAND_ALE		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_WP_B__NAND_WP_B	| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_RB0__NAND_READY_B	| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_CS0__NAND_CE0_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_CS1__NAND_CE1_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_CS2__NAND_CE2_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_CS3__NAND_CE3_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_SD4_CMD__NAND_RE_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_SD4_CLK__NAND_WE_B		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D0__NAND_DATA00		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D1__NAND_DATA01		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D2__NAND_DATA02		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D3__NAND_DATA03		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D4__NAND_DATA04		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D5__NAND_DATA05		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D6__NAND_DATA06		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D7__NAND_DATA07		| MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_SD4_DAT0__NAND_DQS		| MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_gpmi_nand(void)
-{
-	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
-	/* config gpmi nand iomux */
-	imx_iomux_v3_setup_multiple_pads(nfc_pads,
-					 ARRAY_SIZE(nfc_pads));
-
-	/* config gpmi and bch clock to 100 MHz */
-	clrsetbits_le32(&mxc_ccm->cs2cdr,
-			MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
-			MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
-			MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
-			MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
-			MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
-			MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
-
-	/* enable gpmi and bch clock gating */
-	setbits_le32(&mxc_ccm->CCGR4,
-		     MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
-		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
-		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
-		     MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
-		     MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
-
-	/* enable apbh clock gating */
-	setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
-}
-
-static void setup_iomux_enet(void)
-{
-	gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
-	gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
-	gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
-	imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
-	gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
-
-	/* Need delay 10ms according to KSZ9021 spec */
-	udelay(1000 * 10);
-	gpio_set_value(IMX_GPIO_NR(3, 23), 1);
-
-	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
-}
-
-static void setup_iomux_uart(void)
-{
-	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
-	imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX6
-int board_ehci_hcd_init(int port)
-{
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
-	{ USDHC3_BASE_ADDR },
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-
-	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-		gpio_direction_input(IMX_GPIO_NR(7, 0));
-		return !gpio_get_value(IMX_GPIO_NR(7, 0));
-	}
-
-	return 0;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	/*
-	 * Only one USDHC controller on titianium
-	 */
-	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-
-	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-#endif
-
-int board_phy_config(struct phy_device *phydev)
-{
-	/* min rx data delay */
-	ksz9021_phy_extended_write(phydev,
-				   MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
-	/* min tx data delay */
-	ksz9021_phy_extended_write(phydev,
-				   MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
-	/* max rx/tx clock delay, min rx/tx control */
-	ksz9021_phy_extended_write(phydev,
-				   MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-	setup_iomux_enet();
-
-	return cpu_eth_init(bis);
-}
-
-int board_early_init_f(void)
-{
-	setup_iomux_uart();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-
-	setup_gpmi_nand();
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: Titanium\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
-	/* NAND */
-	{ "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
-	/* 4 bit bus width */
-	{ "mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00) },
-	{ "mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00) },
-	{ NULL, 0 },
-};
-#endif
-
-int misc_init_r(void)
-{
-#ifdef CONFIG_CMD_BMODE
-	add_board_boot_modes(board_boot_modes);
-#endif
-
-	return 0;
-}
diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig
deleted file mode 100644
index ffb091fa2d02..000000000000
--- a/configs/titanium_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x1000000
-CONFIG_MX6Q=y
-CONFIG_TARGET_TITANIUM=y
-CONFIG_ENV_OFFSET_REDUND=0x1080000
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/barco/titanium/imximage.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="Titanium > "
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:16M(uboot),512k(env1),512k(env2),-(ubi)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_FSL_USDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
deleted file mode 100644
index 895c79f1a9d2..000000000000
--- a/include/configs/titanium.h
+++ /dev/null
@@ -1,151 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Stefan Roese <sr@denx.de>
- *
- * Configuration settings for the ProjectionDesign / Barco
- * Titanium board.
- *
- * Based on mx6qsabrelite.h which is:
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		3769
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)
-
-#define CONFIG_MXC_UART_BASE		UART1_BASE
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_USDHC_NUM	1
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_FEC_MXC_PHYADDR		4
-
-/* USB Configs */
-#define CONFIG_MXC_USB_PORT	1
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
-
-#define CONFIG_HOSTNAME			"titanium"
-#define CONFIG_UBI_PART			ubi
-#define CONFIG_UBIFS_VOLUME		rootfs0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel=" CONFIG_HOSTNAME "/uImage\0"		\
-	"kernel_fs=/boot/uImage\0"					\
-	"kernel_addr=11000000\0"					\
-	"dtb=" CONFIG_HOSTNAME "/"				\
-		CONFIG_HOSTNAME ".dtb\0"			\
-	"dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0"		\
-	"dtb_addr=12800000\0"						\
-	"script=boot.scr\0" \
-	"uimage=uImage\0" \
-	"console=ttymxc0\0" \
-	"baudrate=115200\0" \
-	"fdt_high=0xffffffff\0"	  \
-	"initrd_high=0xffffffff\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"uimage=uImage\0" \
-	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
-		" ${script}\0" \
-	"bootscript=echo Running bootscript from mmc ...; source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot} rootwait rw\0" \
-	"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
-		" ${uimage}; bootm\0" \
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addcon=setenv bootargs ${bootargs} console=ttymxc0,"		\
-		"${baudrate}\0"						\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ubifs=" CONFIG_HOSTNAME "/ubifs.img\0"		\
-	"part=" __stringify(CONFIG_UBI_PART) "\0"			\
-	"boot_vol=0\0"							\
-	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"			\
-	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0"			\
-	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}"	\
-		" ${filesize}\0"					\
-	"upd_ubifs=run load_ubifs update_ubifs\0"			\
-	"init_ubi=nand erase.part ubi;ubi part ${part};"		\
-		"ubi create ${vol} c800000\0"				\
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"				\
-	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"		\
-		" addcon addmtd;"					\
-		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
-	"ubifsargs=set bootargs ubi.mtd=ubi "				\
-		"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"		\
-	"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"	\
-	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"		\
-		"ubifsload ${dtb_addr} ${dtb_fs};\0"			\
-	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon "	\
-		"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"		\
-	"load_kernel=tftp ${kernel_addr} ${kernel}\0"			\
-	"load_dtb=tftp ${dtb_addr} ${dtb}\0"				\
-	"net_nfs=run load_dtb load_kernel; "				\
-		"run nfsargs addip addcon addmtd;"			\
-		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
-	"delenv=env default -a -f; saveenv; reset\0"
-
-#define CONFIG_BOOTCOMMAND		"run nand_ubifs"
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			(512 << 20)
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Enable NAND support */
-#ifdef CONFIG_CMD_NAND
-
-/* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* DMA stuff, needed for GPMI/MXS NAND support */
-
-/* Environment in NAND */
-
-#else /* CONFIG_CMD_NAND */
-
-/* Environment in MMC */
-
-#endif /* CONFIG_CMD_NAND */
-
-/* UBI/UBIFS config options */
-
-#endif			       /* __CONFIG_H */