| Message ID | 20201125182010.23167-4-pali@kernel.org |
|---|---|
| State | Accepted |
| Commit | 135973967b6c0fd08e5c0e75e55e3ccae83f5853 |
| Delegated to: | Stefan Roese |
| Headers | show |
| Series | Use just one DTS file for all Espressobin variants | expand |
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts index be67a45870..96a4b3d95b 100644 --- a/arch/arm/dts/armada-3720-espressobin.dts +++ b/arch/arm/dts/armada-3720-espressobin.dts @@ -130,6 +130,28 @@ status = "okay"; }; +/* U11 */ +&sdhci1 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + &spi0 { status = "okay"; pinctrl-names = "default";
To simplify setup, configuration and compilation of u-boot, define emmc node for all Espressobin boards. Espressobin boards without populated emmc works correctly, just detection and initialization of emmc obviously fails. Code for emmc is extracted from commit f1a43c84a960 ("arm64: dts: a3720: add support for espressobin with populated emmc"). Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Gérald Kerma <gerald@gk2.net> --- arch/arm/dts/armada-3720-espressobin.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)