diff mbox series

[2/4] Revert "arm64: dts: a3720: add support for espressobin with populated emmc"

Message ID 20201125182010.23167-3-pali@kernel.org
State Accepted
Commit c5c4b69857564bbd3ad64981e2beac458b6d0454
Delegated to: Stefan Roese
Headers show
Series Use just one DTS file for all Espressobin variants | expand

Commit Message

Pali Rohár Nov. 25, 2020, 6:20 p.m. UTC
This reverts commit f1a43c84a960265309fa8365759de271a70c5a7e.
---
 arch/arm/dts/Makefile                         |  1 -
 arch/arm/dts/armada-3720-espressobin-emmc.dts | 44 -------------------
 doc/README.marvell                            |  7 +--
 3 files changed, 2 insertions(+), 50 deletions(-)
 delete mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7d1a369845..3f0e01f0e5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -204,7 +204,6 @@  dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-3720-db.dtb			\
 	armada-3720-espressobin.dtb		\
-	armada-3720-espressobin-emmc.dtb	\
 	armada-3720-turris-mox.dtb		\
 	armada-3720-uDPU.dtb			\
 	armada-375-db.dtb			\
diff --git a/arch/arm/dts/armada-3720-espressobin-emmc.dts b/arch/arm/dts/armada-3720-espressobin-emmc.dts
deleted file mode 100644
index 29ccb6a573..0000000000
--- a/arch/arm/dts/armada-3720-espressobin-emmc.dts
+++ /dev/null
@@ -1,44 +0,0 @@ 
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-/*
- * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
- */
-
-/dts-v1/;
-
-#include "armada-3720-espressobin.dtsi"
-
-/ {
-	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
-	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3710";
-};
-
-/* U11 */
-&sdhci1 {
-	non-removable;
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,xenon-emmc;
-	marvell,xenon-tun-count = <9>;
-	marvell,pad-type = "fixed-1-8v";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mmccard: mmccard@0 {
-		compatible = "mmc-card";
-		reg = <0>;
-	};
-};
diff --git a/doc/README.marvell b/doc/README.marvell
index 6f05ad4cb1..6fc5ac8a40 100644
--- a/doc/README.marvell
+++ b/doc/README.marvell
@@ -43,11 +43,8 @@  Build Procedure
         In order to prevent this, the required device-tree MUST be set during compilation.
         All device-tree files are located in ./arch/arm/dts/ folder.
 
-	For the EspressoBin board with populated eMMC device use
-		# make DEVICE_TREE=armada-3720-espressobin-emmc
-
-	For other DB boards (MacchiatoBin, EspressoBin without soldered eMMC and 3700 DB board)
-	compile u-boot with just default device-tree from defconfig using:
+	For other DB boards (MacchiatoBin, EspressoBin and 3700 DB board) compile u-boot with
+	just default device-tree from defconfig using:
 
 		# make