diff mbox series

ARM: at91: armv7: sama7g5 uses CCF clock driver

Message ID 20201111111508.182534-1-eugen.hristev@microchip.com
State Accepted
Commit 62495e2cdb2e26f74281a0f7f0195b55e6d92abe
Delegated to: Eugen Hristev
Headers show
Series ARM: at91: armv7: sama7g5 uses CCF clock driver | expand

Commit Message

Eugen Hristev Nov. 11, 2020, 11:15 a.m. UTC 
From: Nicolas Ferre <nicolas.ferre@microchip.com>

SAMA7G5 uses CCF driver under drivers/clk/at91/ and not the custom older
at91 clock.c driver. Remove it from the compilation list and adapt cpu.c
arch_cpu_init() to avoid calling at91_clock_init() which is wrong
anyway.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/armv7/Makefile | 7 +++----
 arch/arm/mach-at91/armv7/cpu.c    | 4 ++++
 2 files changed, 7 insertions(+), 4 deletions(-)

Comments

Eugen Hristev Nov. 26, 2020, 8:19 a.m. UTC | #1 
On 11.11.2020 13:15, Eugen Hristev wrote:
> From: Nicolas Ferre <nicolas.ferre@microchip.com>
> 
> SAMA7G5 uses CCF driver under drivers/clk/at91/ and not the custom older
> at91 clock.c driver. Remove it from the compilation list and adapt cpu.c
> arch_cpu_init() to avoid calling at91_clock_init() which is wrong
> anyway.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---

Applied to u-boot-atmel/master, thanks !
diff mbox series

Patch

diff --git a/arch/arm/mach-at91/armv7/Makefile b/arch/arm/mach-at91/armv7/Makefile
index 55477560a8..b46b90b28e 100644
--- a/arch/arm/mach-at91/armv7/Makefile
+++ b/arch/arm/mach-at91/armv7/Makefile
@@ -6,11 +6,10 @@ 
 # (C) Copyright 2013
 # Bo Shen <voice.shen@atmel.com>
 
-obj-$(CONFIG_SAMA5D2)	+= sama5d2_devices.o
-obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o
-obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o
+obj-$(CONFIG_SAMA5D2)	+= sama5d2_devices.o clock.o
+obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o clock.o
+obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o clock.o
 obj-$(CONFIG_SAMA7G5)	+= sama7g5_devices.o
-obj-y += clock.o
 obj-y += cpu.o
 obj-y += reset.o
 ifeq ($(CONFIG_ATMEL_PIT_TIMER),)
diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c
index 8b7355042b..9b3753491e 100644
--- a/arch/arm/mach-at91/armv7/cpu.c
+++ b/arch/arm/mach-at91/armv7/cpu.c
@@ -24,7 +24,11 @@ 
 
 int arch_cpu_init(void)
 {
+#if defined(CONFIG_CLK_CCF)
+	return 0;
+#else
 	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+#endif
 }
 
 void arch_preboot_os(void)