diff mbox series

[v2,10/10] drivers/video/rockchip/rk_vop.c: Add reset support

Message ID 20201027132236.187863854@rtp-net.org
State Superseded
Delegated to: Kever Yang
Headers show
Series rk3399 (Pinebook pro) EDP support | expand

Commit Message

Arnaud Patard (Rtp) Oct. 27, 2020, 1:21 p.m. UTC 
In order to ensure that the VOP registers are in correct state,
add missing support for the VOP reset lines found in the device-tree

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>

Comments

Alper Nebi Yasak Oct. 27, 2020, 10:37 p.m. UTC | #1 
On 27/10/2020 16:21, Arnaud Patard (Rtp) wrote:
> In order to ensure that the VOP registers are in correct state,
> add missing support for the VOP reset lines found in the device-tree
> 
> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>

On a rk3399-gru-kevin, (see comment in patch 1):

Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
diff mbox series

Patch

Index: u-boot/drivers/video/rockchip/rk_vop.c
===================================================================
--- u-boot.orig/drivers/video/rockchip/rk_vop.c
+++ u-boot/drivers/video/rockchip/rk_vop.c
@@ -8,9 +8,11 @@ 
 #include <clk.h>
 #include <display.h>
 #include <dm.h>
+#include <dm/device_compat.h>
 #include <edid.h>
 #include <log.h>
 #include <regmap.h>
+#include <reset.h>
 #include <syscon.h>
 #include <video.h>
 #include <asm/gpio.h>
@@ -36,14 +38,16 @@  enum vop_pol {
 	DCLK_INVERT    = 3
 };
 
-static void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
+static void rkvop_enable(struct udevice *dev, struct rk3288_vop *regs, ulong fbbase,
 			 int fb_bits_per_pixel,
-			 const struct display_timing *edid)
+			 const struct display_timing *edid,
+			 struct reset_ctl *dclk_rst)
 {
 	u32 lb_mode;
 	u32 rgb_mode;
 	u32 hactive = edid->hactive.typ;
 	u32 vactive = edid->vactive.typ;
+	int ret;
 
 	writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1),
 	       &regs->win0_act_info);
@@ -91,6 +95,18 @@  static void rkvop_enable(struct rk3288_v
 
 	writel(fbbase, &regs->win0_yrgb_mst);
 	writel(0x01, &regs->reg_cfg_done); /* enable reg config */
+
+	ret = reset_assert(dclk_rst);
+	if (ret) {
+		dev_warn(dev, "failed to assert dclk reset (ret=%d)\n", ret);
+		return;
+	}
+	udelay(20);
+
+	ret = reset_deassert(dclk_rst);
+	if (ret)
+		dev_warn(dev, "failed to deassert dclk reset (ret=%d)\n", ret);
+
 }
 
 static void rkvop_set_pin_polarity(struct udevice *dev,
@@ -238,6 +254,7 @@  static int rk_display_init(struct udevic
 	enum video_log2_bpp l2bpp;
 	ofnode remote;
 	const char *compat;
+	struct reset_ctl dclk_rst;
 
 	debug("%s(%s, %lx, %s)\n", __func__,
 	      dev_read_name(dev), fbbase, ofnode_get_name(ep_node));
@@ -354,7 +371,14 @@  static int rk_display_init(struct udevic
 	}
 
 	rkvop_mode_set(dev, &timing, vop_id);
-	rkvop_enable(regs, fbbase, 1 << l2bpp, &timing);
+
+	ret = reset_get_by_name(dev, "dclk", &dclk_rst);
+	if (ret) {
+		dev_err(dev, "failed to get dclk reset (ret=%d)\n", ret);
+		return ret;
+	}
+
+	rkvop_enable(dev, regs, fbbase, 1 << l2bpp, &timing, &dclk_rst);
 
 	ret = display_enable(disp, 1 << l2bpp, &timing);
 	if (ret)
@@ -391,11 +415,31 @@  int rk_vop_probe(struct udevice *dev)
 	struct rk_vop_priv *priv = dev_get_priv(dev);
 	int ret = 0;
 	ofnode port, node;
+	struct reset_ctl ahb_rst;
 
 	/* Before relocation we don't need to do anything */
 	if (!(gd->flags & GD_FLG_RELOC))
 		return 0;
 
+	ret = reset_get_by_name(dev, "ahb", &ahb_rst);
+	if (ret) {
+		dev_err(dev, "failed to get ahb reset (ret=%d)\n", ret);
+		return ret;
+	}
+
+	ret = reset_assert(&ahb_rst);
+	if (ret) {
+		dev_err(dev, "failed to assert ahb reset (ret=%d)\n", ret);
+	return ret;
+	}
+	udelay(20);
+
+	ret = reset_deassert(&ahb_rst);
+	if (ret) {
+		dev_err(dev, "failed to deassert ahb reset (ret=%d)\n", ret);
+		return ret;
+	}
+
 	plat->base = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - plat->size;
 
 #if defined(CONFIG_EFI_LOADER)