Message ID | 20201024152156.25578-9-samuel@sholland.org |
---|---|
State | Changes Requested |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | PinePhone automatic device tree selection | expand |
On Sat, Oct 24, 2020 at 8:52 PM Samuel Holland <samuel@sholland.org> wrote: > > The PinePhone is a smartphone produced by Pine64, with an A64 SoC, > 2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel, > and Quectel EG25-G modem. > > There are two main board revisions: 1.1 for early adopters, and 1.2 > for mass production. Since there is code to detect the board revision > at boot, one config/image can support both boards. > > Acked-by: Maxime Ripard <mripard@kernel.org> > Signed-off-by: Samuel Holland <samuel@sholland.org> > --- > configs/pinephone_defconfig | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > create mode 100644 configs/pinephone_defconfig Can you update sunxi board maintainers file and send this patch alone. Except this, all Applied to u-boot-sunxi/master
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig new file mode 100644 index 00000000000..64ecef59c90 --- /dev/null +++ b/configs/pinephone_defconfig @@ -0,0 +1,12 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=3881949 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_PINEPHONE_DT_SELECTION=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"