diff mbox series

[v2,02/21] mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of ios_post()

Message ID 20201016110855.26078-3-faiz_abbas@ti.com
State Changes Requested
Delegated to: Lokesh Vutla
Headers show
Series Add support for MMC higher speed modes for TI's am65x, j721e and j7200 platforms | expand

Commit Message

Faiz Abbas Oct. 16, 2020, 11:08 a.m. UTC 
There are some speed modes that work without switching the dll on.
Unconditionally switch off the DLL before setting clock frequency to
support this case. The software will automatically enable DLL for speed
modes that require it. This also means the dll_on priv data member is no
longer required.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/mmc/am654_sdhci.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index 82abf484e4..15a47f1e71 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -84,7 +84,6 @@  struct am654_sdhci_plat {
 #define IOMUX_PRESENT	(1 << 1)
 #define FREQSEL_2_BIT	(1 << 2)
 #define STRBSEL_4_BIT	(1 << 3)
-	bool dll_on;
 };
 
 struct timing_data {
@@ -141,12 +140,7 @@  static int am654_sdhci_set_ios_post(struct sdhci_host *host)
 	val &= ~SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, val, SDHCI_CLOCK_CONTROL);
 
-	/* power off phy */
-	if (plat->dll_on) {
-		regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0);
-
-		plat->dll_on = false;
-	}
+	regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0);
 
 	/* restart clock */
 	sdhci_set_clock(host->mmc, speed);
@@ -212,8 +206,6 @@  static int am654_sdhci_set_ios_post(struct sdhci_host *host)
 					 val & DLLRDY_MASK, 1000, 1000000);
 		if (ret)
 			return ret;
-
-		plat->dll_on = true;
 	}
 
 	return 0;