diff mbox series

[v4,16/59] i2c: Add a generic driver to generate ACPI info

Message ID 20200922124521.v4.16.I12e1ee504597159411b44512d27bb8f81576605a@changeid
State Accepted
Commit fd42f263cef9fd6bba9ded76a82d4ac66450e156
Delegated to: Bin Meng
Headers show
Series dm: Add programatic generation of ACPI tables (part D) | expand

Commit Message

Simon Glass Sept. 22, 2020, 6:45 p.m. UTC
Many I2C devices produce roughly the same ACPI data with just things like
the GPIO/interrupt information being different.

This can be handled by a generic driver along with some information in the
device tree.

Add a generic i2c driver for this purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
---

(no changes since v2)

Changes in v2:
- Fix incorrect space in enable-off-delay-ms

Changes in v1:
- Adjust implementation to match new ACPI GPIO generation
- Capitalise ACPI_OPS_PTR
- Rename acpi-probed to linux,probed
- Support hid-over-i2c separately as well
- Use acpi,ddn instead of acpi,desc
- Use updated acpi_device_write_dsm_i2c_hid() function

 doc/device-tree-bindings/i2c/generic-acpi.txt |  42 ++++
 drivers/i2c/Makefile                          |   3 +
 drivers/i2c/acpi_i2c.c                        | 226 ++++++++++++++++++
 drivers/i2c/acpi_i2c.h                        |  15 ++
 drivers/i2c/i2c-uclass.c                      |  17 ++
 include/acpi/acpi_device.h                    |  55 +++++
 include/i2c.h                                 |  23 ++
 7 files changed, 381 insertions(+)
 create mode 100644 doc/device-tree-bindings/i2c/generic-acpi.txt
 create mode 100644 drivers/i2c/acpi_i2c.c
 create mode 100644 drivers/i2c/acpi_i2c.h
diff mbox series

Patch

diff --git a/doc/device-tree-bindings/i2c/generic-acpi.txt b/doc/device-tree-bindings/i2c/generic-acpi.txt
new file mode 100644
index 00000000000..3510a71b570
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/generic-acpi.txt
@@ -0,0 +1,42 @@ 
+I2C generic device
+==================
+
+This is used only to generate ACPI tables for an I2C device.
+
+Required properties :
+
+ - compatible : "i2c-chip";
+ - reg : I2C chip address
+ - acpi,hid : HID name for the device
+
+Optional properies in addition to device.txt:
+
+ - reset-gpios : GPIO used to assert reset to the device
+ - irq-gpios : GPIO used for interrupt (if Interrupt is not used)
+ - stop-gpios : GPIO used to stop the device
+ - interrupts-extended : Interrupt to use for the device
+ - reset-delay-ms : Delay after de-asserting reset, in ms
+ - reset-off-delay-ms : Delay after asserting reset (during power off)
+ - enable-delay-ms : Delay after asserting enable
+ - enable-off-delay-ms : Delay after de-asserting enable (during power off)
+ - stop-delay-ms : Delay after de-aserting stop
+ - stop-off-delay-ms : Delay after asserting stop (during power off)
+ - hid-descr-addr : HID register offset (for Human Interface Devices)
+
+Example
+-------
+
+	elan-touchscreen@10 {
+		compatible = "i2c-chip";
+		reg = <0x10>;
+		acpi,hid = "ELAN0001";
+		acpi,ddn = "ELAN Touchscreen";
+		interrupts-extended = <&acpi_gpe GPIO_21_IRQ
+			IRQ_TYPE_EDGE_FALLING>;
+		linux,probed;
+		reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>;
+		reset-delay-ms = <20>;
+		enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>;
+		enable-delay-ms = <1>;
+		acpi,has-power-resource;
+	};
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index f7b27864488..bd248cbf52b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -3,6 +3,9 @@ 
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 obj-$(CONFIG_DM_I2C) += i2c-uclass.o
+ifdef CONFIG_ACPIGEN
+obj-$(CONFIG_DM_I2C) += acpi_i2c.o
+endif
 obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o
 obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
 obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
diff --git a/drivers/i2c/acpi_i2c.c b/drivers/i2c/acpi_i2c.c
new file mode 100644
index 00000000000..57d29683cbf
--- /dev/null
+++ b/drivers/i2c/acpi_i2c.c
@@ -0,0 +1,226 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <log.h>
+#include <acpi/acpi_device.h>
+#include <acpi/acpigen.h>
+#include <acpi/acpi_dp.h>
+#ifdef CONFIG_X86
+#include <asm/intel_pinctrl_defs.h>
+#endif
+#include <asm-generic/gpio.h>
+#include <dm/acpi.h>
+
+static bool acpi_i2c_add_gpios_to_crs(struct acpi_i2c_priv *priv)
+{
+	/*
+	 * Return false if:
+	 * 1. Request to explicitly disable export of GPIOs in CRS, or
+	 * 2. Both reset and enable GPIOs are not provided.
+	 */
+	if (priv->disable_gpio_export_in_crs ||
+	    (!dm_gpio_is_valid(&priv->reset_gpio) &&
+	     !dm_gpio_is_valid(&priv->enable_gpio)))
+		return false;
+
+	return true;
+}
+
+static int acpi_i2c_write_gpio(struct acpi_ctx *ctx, struct gpio_desc *gpio,
+			       int *curindex)
+{
+	int ret;
+
+	if (!dm_gpio_is_valid(gpio))
+		return -ENOENT;
+
+	acpi_device_write_gpio_desc(ctx, gpio);
+	ret = *curindex;
+	(*curindex)++;
+
+	return ret;
+}
+
+int acpi_i2c_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
+{
+	int reset_gpio_index = -1, enable_gpio_index = -1, irq_gpio_index = -1;
+	enum i2c_device_t type = dev_get_driver_data(dev);
+	struct acpi_i2c_priv *priv = dev_get_priv(dev);
+	struct acpi_dp *dsd = NULL;
+	char scope[ACPI_PATH_MAX];
+	char name[ACPI_NAME_MAX];
+	int tx_state_val;
+	int curindex = 0;
+	int ret;
+
+#ifdef CONFIG_X86
+	tx_state_val = PAD_CFG0_TX_STATE;
+#elif defined(CONFIG_SANDBOX)
+	tx_state_val = BIT(7);  /* test value */
+#else
+#error "Not supported on this architecture"
+#endif
+	ret = acpi_get_name(dev, name);
+	if (ret)
+		return log_msg_ret("name", ret);
+	ret = acpi_device_scope(dev, scope, sizeof(scope));
+	if (ret)
+		return log_msg_ret("scope", ret);
+
+	/* Device */
+	acpigen_write_scope(ctx, scope);
+	acpigen_write_device(ctx, name);
+	acpigen_write_name_string(ctx, "_HID", priv->hid);
+	if (type == I2C_DEVICE_HID_OVER_I2C)
+		acpigen_write_name_string(ctx, "_CID", "PNP0C50");
+	acpigen_write_name_integer(ctx, "_UID", priv->uid);
+	acpigen_write_name_string(ctx, "_DDN", priv->desc);
+	acpigen_write_sta(ctx, acpi_device_status(dev));
+
+	/* Resources */
+	acpigen_write_name(ctx, "_CRS");
+	acpigen_write_resourcetemplate_header(ctx);
+	acpi_device_write_i2c_dev(ctx, dev);
+
+	/* Use either Interrupt() or GpioInt() */
+	if (dm_gpio_is_valid(&priv->irq_gpio)) {
+		irq_gpio_index = acpi_i2c_write_gpio(ctx, &priv->irq_gpio,
+						     &curindex);
+	} else {
+		ret = acpi_device_write_interrupt_irq(ctx, &priv->irq);
+		if (ret < 0)
+			return log_msg_ret("irq", ret);
+	}
+
+	if (acpi_i2c_add_gpios_to_crs(priv)) {
+		reset_gpio_index = acpi_i2c_write_gpio(ctx, &priv->reset_gpio,
+						       &curindex);
+		enable_gpio_index = acpi_i2c_write_gpio(ctx, &priv->enable_gpio,
+							&curindex);
+	}
+	acpigen_write_resourcetemplate_footer(ctx);
+
+	/* Wake capabilities */
+	if (priv->wake) {
+		acpigen_write_name_integer(ctx, "_S0W", 4);
+		acpigen_write_prw(ctx, priv->wake, 3);
+	}
+
+	/* DSD */
+	if (priv->probed || priv->property_count || priv->compat_string ||
+	    reset_gpio_index >= 0 || enable_gpio_index >= 0 ||
+	    irq_gpio_index >= 0) {
+		char path[ACPI_PATH_MAX];
+
+		ret = acpi_device_path(dev, path, sizeof(path));
+		if (ret)
+			return log_msg_ret("path", ret);
+
+		dsd = acpi_dp_new_table("_DSD");
+		if (priv->compat_string)
+			acpi_dp_add_string(dsd, "compatible",
+					   priv->compat_string);
+		if (priv->probed)
+			acpi_dp_add_integer(dsd, "linux,probed", 1);
+		if (irq_gpio_index >= 0)
+			acpi_dp_add_gpio(dsd, "irq-gpios", path,
+					 irq_gpio_index, 0,
+					 priv->irq_gpio.flags &
+					 GPIOD_ACTIVE_LOW ?
+					 ACPI_GPIO_ACTIVE_LOW : 0);
+		if (reset_gpio_index >= 0)
+			acpi_dp_add_gpio(dsd, "reset-gpios", path,
+					 reset_gpio_index, 0,
+					 priv->reset_gpio.flags &
+					 GPIOD_ACTIVE_LOW ?
+					 ACPI_GPIO_ACTIVE_LOW : 0);
+		if (enable_gpio_index >= 0)
+			acpi_dp_add_gpio(dsd, "enable-gpios", path,
+					 enable_gpio_index, 0,
+					 priv->enable_gpio.flags &
+					 GPIOD_ACTIVE_LOW ?
+					 ACPI_GPIO_ACTIVE_LOW : 0);
+		/* Generic property list is not supported */
+		acpi_dp_write(ctx, dsd);
+	}
+
+	/* Power Resource */
+	if (priv->has_power_resource) {
+		ret = acpi_device_add_power_res(ctx, tx_state_val,
+			"\\_SB.GPC0", "\\_SB.SPC0",
+			&priv->reset_gpio, priv->reset_delay_ms,
+			priv->reset_off_delay_ms, &priv->enable_gpio,
+			priv->enable_delay_ms, priv->enable_off_delay_ms,
+			&priv->stop_gpio, priv->stop_delay_ms,
+			priv->stop_off_delay_ms);
+		if (ret)
+			return log_msg_ret("power", ret);
+	}
+	if (priv->hid_desc_reg_offset) {
+		ret = acpi_device_write_dsm_i2c_hid(ctx,
+						    priv->hid_desc_reg_offset);
+		if (ret)
+			return log_msg_ret("dsm", ret);
+	}
+
+	acpigen_pop_len(ctx); /* Device */
+	acpigen_pop_len(ctx); /* Scope */
+
+	return 0;
+}
+
+int acpi_i2c_ofdata_to_platdata(struct udevice *dev)
+{
+	struct acpi_i2c_priv *priv = dev_get_priv(dev);
+
+	gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio,
+			     GPIOD_IS_OUT);
+	gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable_gpio,
+			     GPIOD_IS_OUT);
+	gpio_request_by_name(dev, "irq-gpios", 0, &priv->irq_gpio, GPIOD_IS_IN);
+	gpio_request_by_name(dev, "stop-gpios", 0, &priv->stop_gpio,
+			     GPIOD_IS_OUT);
+	irq_get_by_index(dev, 0, &priv->irq);
+	priv->hid = dev_read_string(dev, "acpi,hid");
+	if (!priv->hid)
+		return log_msg_ret("hid", -EINVAL);
+	dev_read_u32(dev, "acpi,uid", &priv->uid);
+	priv->desc = dev_read_string(dev, "acpi,ddn");
+	dev_read_u32(dev, "acpi,wake", &priv->wake);
+	priv->probed = dev_read_bool(dev, "linux,probed");
+	priv->compat_string = dev_read_string(dev, "acpi,compatible");
+	priv->has_power_resource = dev_read_bool(dev,
+						 "acpi,has-power-resource");
+	dev_read_u32(dev, "hid-descr-addr", &priv->hid_desc_reg_offset);
+	dev_read_u32(dev, "reset-delay-ms", &priv->reset_delay_ms);
+	dev_read_u32(dev, "reset-off-delay-ms", &priv->reset_off_delay_ms);
+	dev_read_u32(dev, "enable-delay-ms", &priv->enable_delay_ms);
+	dev_read_u32(dev, "enable-off-delay-ms", &priv->enable_off_delay_ms);
+	dev_read_u32(dev, "stop-delay-ms", &priv->stop_delay_ms);
+	dev_read_u32(dev, "stop-off-delay-ms", &priv->stop_off_delay_ms);
+
+	return 0;
+}
+
+/* Use name specified in priv or build one from I2C address */
+static int acpi_i2c_get_name(const struct udevice *dev, char *out_name)
+{
+	struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+	struct acpi_i2c_priv *priv = dev_get_priv(dev);
+
+	snprintf(out_name, ACPI_NAME_MAX,
+		 priv->hid_desc_reg_offset ? "H%03X" : "D%03X",
+		 chip->chip_addr);
+
+	return 0;
+}
+
+struct acpi_ops acpi_i2c_ops = {
+	.fill_ssdt	= acpi_i2c_fill_ssdt,
+	.get_name	= acpi_i2c_get_name,
+};
diff --git a/drivers/i2c/acpi_i2c.h b/drivers/i2c/acpi_i2c.h
new file mode 100644
index 00000000000..1f4be296016
--- /dev/null
+++ b/drivers/i2c/acpi_i2c.h
@@ -0,0 +1,15 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __ACPI_I2C_H
+#define __ACPI_I2C_H
+
+#include <dm/acpi.h>
+
+extern struct acpi_ops acpi_i2c_ops;
+
+int acpi_i2c_ofdata_to_platdata(struct udevice *dev);
+
+#endif
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 2373aa2ea4c..5c4626b0442 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -9,6 +9,8 @@ 
 #include <i2c.h>
 #include <log.h>
 #include <malloc.h>
+#include <acpi/acpi_device.h>
+#include <dm/acpi.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dm/pinctrl.h>
@@ -16,6 +18,7 @@ 
 #include <asm/gpio.h>
 #endif
 #include <linux/delay.h>
+#include "acpi_i2c.h"
 
 #define I2C_MAX_OFFSET_LEN	4
 
@@ -749,7 +752,21 @@  UCLASS_DRIVER(i2c_generic) = {
 	.name		= "i2c_generic",
 };
 
+static const struct udevice_id generic_chip_i2c_ids[] = {
+	{ .compatible = "i2c-chip", .data = I2C_DEVICE_GENERIC },
+#if CONFIG_IS_ENABLED(ACPIGEN)
+	{ .compatible = "hid-over-i2c", .data = I2C_DEVICE_HID_OVER_I2C },
+#endif
+	{ }
+};
+
 U_BOOT_DRIVER(i2c_generic_chip_drv) = {
 	.name		= "i2c_generic_chip_drv",
 	.id		= UCLASS_I2C_GENERIC,
+	.of_match	= generic_chip_i2c_ids,
+#if CONFIG_IS_ENABLED(ACPIGEN)
+	.ofdata_to_platdata	= acpi_i2c_ofdata_to_platdata,
+	.priv_auto_alloc_size	= sizeof(struct acpi_i2c_priv),
+#endif
+	ACPI_OPS_PTR(&acpi_i2c_ops)
 };
diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h
index a5b12217820..1b838fcb857 100644
--- a/include/acpi/acpi_device.h
+++ b/include/acpi/acpi_device.h
@@ -10,7 +10,9 @@ 
 #define __ACPI_DEVICE_H
 
 #include <i2c.h>
+#include <irq.h>
 #include <spi.h>
+#include <asm-generic/gpio.h>
 #include <linux/bitops.h>
 
 struct acpi_ctx;
@@ -235,6 +237,59 @@  struct acpi_spi {
 	const char *resource;
 };
 
+/**
+ * struct acpi_i2c_priv - Information read from device tree
+ *
+ * This is used by devices which want to specify various pieces of ACPI
+ * information, including power control. It allows a generic function to
+ * generate the information for ACPI, based on device-tree properties.
+ *
+ * @disable_gpio_export_in_crs: Don't export GPIOs in the CRS
+ * @reset_gpio: GPIO used to assert reset to the device
+ * @enable_gpio: GPIO used to enable the device
+ * @stop_gpio: GPIO used to stop the device
+ * @irq_gpio: GPIO used for interrupt (if @irq is not used)
+ * @irq: IRQ used for interrupt (if @irq_gpio is not used)
+ * @hid: _HID value for device (required)
+ * @uid: _UID value for device
+ * @desc: _DDN value for device
+ * @wake: Wake event, e.g. GPE0_DW1_15; 0 if none
+ * @property_count: Number of other DSD properties (currently always 0)
+ * @probed: true set set 'linux,probed' property
+ * @compat_string: Device tree compatible string to report through ACPI
+ * @has_power_resource: true if this device has a power resource
+ * @reset_delay_ms: Delay after de-asserting reset, in ms
+ * @reset_off_delay_ms: Delay after asserting reset (during power off)
+ * @enable_delay_ms: Delay after asserting enable
+ * @enable_off_delay_ms: Delay after de-asserting enable (during power off)
+ * @stop_delay_ms: Delay after de-aserting stop
+ * @stop_off_delay_ms: Delay after asserting stop (during power off)
+ * @hid_desc_reg_offset: HID register offset (for Human Interface Devices)
+ */
+struct acpi_i2c_priv {
+	bool disable_gpio_export_in_crs;
+	struct gpio_desc reset_gpio;
+	struct gpio_desc enable_gpio;
+	struct gpio_desc irq_gpio;
+	struct gpio_desc stop_gpio;
+	struct irq irq;
+	const char *hid;
+	u32 uid;
+	const char *desc;
+	u32 wake;
+	u32 property_count;
+	bool probed;
+	const char *compat_string;
+	bool has_power_resource;
+	u32 reset_delay_ms;
+	u32 reset_off_delay_ms;
+	u32 enable_delay_ms;
+	u32 enable_off_delay_ms;
+	u32 stop_delay_ms;
+	u32 stop_off_delay_ms;
+	u32 hid_desc_reg_offset;
+};
+
 /**
  * acpi_device_path() - Get the full path to an ACPI device
  *
diff --git a/include/i2c.h b/include/i2c.h
index 1d792db454a..880aa8032b7 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -58,6 +58,12 @@  enum i2c_address_mode {
 	I2C_MODE_10_BIT
 };
 
+/** enum i2c_device_t - Types of I2C devices, used for compatible strings */
+enum i2c_device_t {
+	I2C_DEVICE_GENERIC,
+	I2C_DEVICE_HID_OVER_I2C,
+};
+
 struct udevice;
 /**
  * struct dm_i2c_chip - information about an i2c chip
@@ -558,6 +564,23 @@  int i2c_emul_find(struct udevice *dev, struct udevice **emulp);
  */
 struct udevice *i2c_emul_get_device(struct udevice *emul);
 
+/* ACPI operations for generic I2C devices */
+extern struct acpi_ops i2c_acpi_ops;
+
+/**
+ * acpi_i2c_ofdata_to_platdata() - Read properties intended for ACPI
+ *
+ * This reads the generic I2C properties from the device tree, so that these
+ * can be used to create ACPI information for the device.
+ *
+ * See the i2c/generic-acpi.txt binding file for information about the
+ * properties.
+ *
+ * @dev: I2C device to process
+ * @return 0 if OK, -EINVAL if acpi,hid is not present
+ */
+int acpi_i2c_ofdata_to_platdata(struct udevice *dev);
+
 #ifndef CONFIG_DM_I2C
 
 /*