diff mbox series

[1/3] env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200

Message ID 20200818190945.8966-2-s-anna@ti.com
State Accepted
Commit 615d10f736e850c073a17b2f64fd08c7f5b32fe2
Delegated to: Lokesh Vutla
Headers show
Series MCU R5F branch-only boot on J7200 SoCs | expand

Commit Message

Suman Anna Aug. 18, 2020, 7:09 p.m. UTC 
The R5 SPL on J7200 SoCs will be limited to booting just the
MCU R5FSS0 R5F core in LockStep-mode at present, so add the
two required environment variables 'addr_mcur5f0_0load' and
'name_mcur5f0_0fw' that are needed by the R5 SPL early-boot
logic. The firmware name used is also different from that on
J721E SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 include/configs/j721e_evm.h | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index dc06de234154..5e6e6f81694b 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -82,11 +82,17 @@ 
 	"name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
 
 #ifdef CONFIG_SYS_K3_SPL_ATF
+#if defined(CONFIG_TARGET_J721E_R5_EVM)
 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
 	"addr_mainr5f0_0load=0x88000000\0"				\
 	"name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0"		\
 	"addr_mcur5f0_0load=0x89000000\0"				\
 	"name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
+#elif defined(CONFIG_TARGET_J7200_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
+	"addr_mcur5f0_0load=0x89000000\0"				\
+	"name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
+#endif /* CONFIG_TARGET_J721E_R5_EVM */
 #else
 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
 #endif /* CONFIG_SYS_K3_SPL_ATF */