diff mbox series

[v1,08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services

Message ID 20200817043431.28718-9-chee.hong.ang@intel.com
State New
Delegated to: Simon Goldschmidt
Headers show
Series Enable ARM Trusted Firmware for U-Boot | expand

Commit Message

Ang, Chee Hong Aug. 17, 2020, 4:34 a.m. UTC
This header file defines the Secure Monitor Call (SMC) message
protocol for ATF (BL31) PSCI runtime services. It includes all
the PSCI SiP function identifiers for the secure runtime services
provided by ATF. The secure runtime services include System Manager's
registers access, 2nd phase bitstream FPGA reconfiguration, Remote
System Update (RSU) and etc.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
---
 include/linux/intel-smc.h | 573 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 573 insertions(+)
 create mode 100644 include/linux/intel-smc.h

Comments

Tan, Ley Foon Sept. 25, 2020, 9:16 a.m. UTC | #1
> -----Original Message-----
> From: Ang, Chee Hong <chee.hong.ang@intel.com>
> Sent: Monday, August 17, 2020 12:34 PM
> To: u-boot@lists.denx.de
> Cc: Marek Vasut <marex@denx.de>; Simon Goldschmidt
> <simon.k.r.goldschmidt@gmail.com>; Tom Rini <trini@konsulko.com>; See,
> Chin Liang <chin.liang.see@intel.com>; Tan, Ley Foon
> <ley.foon.tan@intel.com>; Ang, Chee Hong <chee.hong.ang@intel.com>;
> Chee, Tien Fong <tien.fong.chee@intel.com>; Lim, Elly Siew Chin
> <elly.siew.chin.lim@intel.com>
> Subject: [PATCH v1 08/16] arm: socfpga: soc64: Define SMC function
> identifiers for PSCI SiP services
> 
> This header file defines the Secure Monitor Call (SMC) message protocol for
> ATF (BL31) PSCI runtime services. It includes all the PSCI SiP function
> identifiers for the secure runtime services provided by ATF. The secure
> runtime services include System Manager's registers access, 2nd phase
> bitstream FPGA reconfiguration, Remote System Update (RSU) and etc.
> 
> Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
> ---
>  include/linux/intel-smc.h | 573
> ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 573 insertions(+)
>  create mode 100644 include/linux/intel-smc.h
> 
> diff --git a/include/linux/intel-smc.h b/include/linux/intel-smc.h new file
> mode 100644 index 0000000000..fa7d1dff56
> --- /dev/null
> +++ b/include/linux/intel-smc.h
Suggest to use intel-socfpga-smc.h

> @@ -0,0 +1,573 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2017-2018, Intel Corporation  */
> +
> +#ifndef __INTEL_SMC_H
> +#define __INTEL_SMC_H
> +
> +#include <linux/arm-smccc.h>
> +#include <linux/bitops.h>
> +
> +/*
> + * This file defines the Secure Monitor Call (SMC) message protocol
> +used for
> + * service layer driver in normal world (EL1) to communicate with
> +secure
> + * monitor software in Secure Monitor Exception Level 3 (EL3).
> + *
> + * This file is shared with secure firmware (FW) which is out of kernel tree.
Should be "u-boot tree"?
> + *
> + * An ARM SMC instruction takes a function identifier and up to 6
> +64-bit
> + * register values as arguments, and can return up to 4 64-bit register
> + * value. The operation of the secure monitor is determined by the
value -> values

> +parameter
> + * values passed in through registers.
> +
> + * EL1 and EL3 communicates pointer as physical address rather than the
> + * virtual address.
> + */
> +
> +/*
> + * Functions specified by ARM SMC Calling convention:
> + *
> + * FAST call executes atomic operations, returns when the requested
> +operation
> + * has completed.
> + * STD call starts a operation which can be preempted by a non-secure
> + * interrupt. The call can return before the requested operation has
> + * completed.
> + *
> + * a0..a7 is used as register names in the descriptions below, on arm32
> + * that translates to r0..r7 and on arm64 to w0..w7.
> + */
> +
> +#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
> +	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
> ARM_SMCCC_SMC_64, \
> +	ARM_SMCCC_OWNER_SIP, (func_num))
> +
> +#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
> +	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL,
> ARM_SMCCC_SMC_64, \
> +	ARM_SMCCC_OWNER_SIP, (func_num))
> +
> +/*
> + * Return values in INTEL_SIP_SMC_* call
> + *
> + * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
> + * Secure monitor software doesn't recognize the request.
> + *
> + * INTEL_SIP_SMC_STATUS_OK:
> + * FPGA configuration completed successfully,
> + * In case of FPGA configuration write operation, it means secure
> +monitor
> + * software can accept the next chunk of FPGA configuration data.
> + *
> + * INTEL_SIP_SMC_STATUS_BUSY:
> + * In case of FPGA configuration write operation, it means secure
> +monitor
> + * software is still processing previous data & can't accept the next
> +chunk
> + * of data. Service driver needs to issue
> + * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
> + * completed block(s).
> + *
> + * INTEL_SIP_SMC_STATUS_ERROR:
> + * There is error during the FPGA configuration process.
This error only for FPGA configuration?

[....]

Regards
Ley Foon
diff mbox series

Patch

diff --git a/include/linux/intel-smc.h b/include/linux/intel-smc.h
new file mode 100644
index 0000000000..fa7d1dff56
--- /dev/null
+++ b/include/linux/intel-smc.h
@@ -0,0 +1,573 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#ifndef __INTEL_SMC_H
+#define __INTEL_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+/*
+ * This file defines the Secure Monitor Call (SMC) message protocol used for
+ * service layer driver in normal world (EL1) to communicate with secure
+ * monitor software in Secure Monitor Exception Level 3 (EL3).
+ *
+ * This file is shared with secure firmware (FW) which is out of kernel tree.
+ *
+ * An ARM SMC instruction takes a function identifier and up to 6 64-bit
+ * register values as arguments, and can return up to 4 64-bit register
+ * value. The operation of the secure monitor is determined by the parameter
+ * values passed in through registers.
+
+ * EL1 and EL3 communicates pointer as physical address rather than the
+ * virtual address.
+ */
+
+/*
+ * Functions specified by ARM SMC Calling convention:
+ *
+ * FAST call executes atomic operations, returns when the requested operation
+ * has completed.
+ * STD call starts a operation which can be preempted by a non-secure
+ * interrupt. The call can return before the requested operation has
+ * completed.
+ *
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7.
+ */
+
+#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+/*
+ * Return values in INTEL_SIP_SMC_* call
+ *
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
+ * Secure monitor software doesn't recognize the request.
+ *
+ * INTEL_SIP_SMC_STATUS_OK:
+ * FPGA configuration completed successfully,
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software can accept the next chunk of FPGA configuration data.
+ *
+ * INTEL_SIP_SMC_STATUS_BUSY:
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software is still processing previous data & can't accept the next chunk
+ * of data. Service driver needs to issue
+ * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
+ * completed block(s).
+ *
+ * INTEL_SIP_SMC_STATUS_ERROR:
+ * There is error during the FPGA configuration process.
+ *
+ * INTEL_SIP_SMC_REG_ERROR:
+ * There is error during a read or write operation of the protected
+ * registers.
+ */
+#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
+#define INTEL_SIP_SMC_STATUS_OK				0x0
+#define INTEL_SIP_SMC_STATUS_BUSY			0x1
+#define INTEL_SIP_SMC_STATUS_REJECTED			0x2
+#define INTEL_SIP_SMC_STATUS_ERROR			0x4
+#define INTEL_SIP_SMC_REG_ERROR				0x5
+#define INTEL_SIP_SMC_RSU_ERROR				0x7
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_START
+ *
+ * Sync call used by service driver at EL1 to request the FPGA in EL3 to
+ * be prepare to receive a new configuration.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
+ * a1: flag for full or partial configuration
+ *    0 full reconfiguration.
+ *    1 partial reconfiguration.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
+#define INTEL_SIP_SMC_FPGA_CONFIG_START \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ *
+ * Async call used by service driver at EL1 to provide FPGA configuration data
+ * to secure world.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
+ * a1: 64bit physical address of the configuration data memory block
+ * a2: Size of configuration data block.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY,
+ * INTEL_SIP_SMC_STATUS_REJECTED or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block if any completed
+ * block, otherwise zero value.
+ * a2: 64bit physical address of 2nd completed memory block if any completed
+ * block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if any completed
+ * block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
+#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
+	INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
+ *
+ * Sync call used by service driver at EL1 to track the completed write
+ * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ * call returns INTEL_SIP_SMC_STATUS_BUSY.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
+ * INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block.
+ * a2: 64bit physical address of 2nd completed memory block if
+ * any completed block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if
+ * any completed block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
+#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
+INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
+ *
+ * Sync call used by service driver at EL1 to inform secure world that all
+ * data are sent, to check whether or not the secure world had completed
+ * the FPGA configuration process.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or
+ * INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
+#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
+ *
+ * Sync call used by service driver at EL1 to query the physical address of
+ * memory block reserved by secure monitor software.
+ *
+ * Call register usage:
+ * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1: start of physical address of reserved memory block.
+ * a2: size of reserved memory block.
+ * a3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
+#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
+ *
+ * For SMC loop-back mode only, used for internal integration, debugging
+ * or troubleshooting.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
+#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
+
+/*
+ * Request INTEL_SIP_SMC_REG_READ
+ *
+ * Read a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_READ.
+ * a1: register address.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1: Value in the register
+ * a2-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_READ 7
+#define INTEL_SIP_SMC_REG_READ \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
+
+/*
+ * Request INTEL_SIP_SMC_REG_WRITE
+ *
+ * Write a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_WRITE.
+ * a1: register address
+ * a2: value to program into register.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
+#define INTEL_SIP_SMC_REG_WRITE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
+ *
+ * Update one or more bits in a protected register using a
+ * read-modify-write operation.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_UPDATE.
+ * a1: register address
+ * a2: Write Mask.
+ * a3: Value to write.
+ * a4-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1-3: Not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
+#define INTEL_SIP_SMC_REG_UPDATE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
+
+/*
+* Request INTEL_SIP_SMC_RSU_STATUS
+*
+* Sync call used by service driver at EL1 to query the RSU status
+*
+* Call register usage:
+* a0 INTEL_SIP_SMC_RSU_STATUS
+* a1-7 not used
+*
+* Return status
+* a0: Current Image
+* a1: Last Failing Image
+* a2: Version [width 32 bit] | State [width 32 bit]
+* a3: Error details [width 32 bit] | Error location [width 32 bit]
+*
+* Or
+*
+* a0: INTEL_SIP_SMC_RSU_ERROR
+*/
+#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
+#define INTEL_SIP_SMC_RSU_STATUS \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
+
+/*
+* Request INTEL_SIP_SMC_RSU_UPDATE
+*
+* Sync call used by service driver at EL1 to tell you next reboot is RSU_UPDATE
+*
+* Call register usage:
+* a0 INTEL_SIP_SMC_RSU_UPDATE
+* a1 64bit physical address of the configuration data memory in flash
+* a2-7 not used
+*
+* Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+*/
+#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
+#define INTEL_SIP_SMC_RSU_UPDATE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
+
+/*
+ * Request INTEL_SIP_SMC_ECC_DBE
+ *
+ * Sync call used by service driver at EL1 alert EL3 that a Double Bit
+ * ECC error has occurred.
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_ECC_DBE
+ * a1 SysManager Double Bit Error value
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
+#define INTEL_SIP_SMC_ECC_DBE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
+
+/*
+* Request INTEL_SIP_SMC_RSU_NOTIFY
+*
+* Sync call used by service driver at EL1 to report HPS software execution stage
+*
+* Call register usage:
+* a0 INTEL_SIP_SMC_RSU_NOTIFY
+* a1 32bit HPS software execution stage
+* a2-7 not used
+*
+* Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+*/
+#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
+#define INTEL_SIP_SMC_RSU_NOTIFY \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ *
+ * Sync call used by service driver at EL1 to query the RSU retry counter
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_RSU_ERROR.
+ * a1 retry counter
+*/
+#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
+#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_DCMF_VERSION
+ *
+ * Sync call used by service driver at EL1 to query DCMF version
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_DCMF_VERSION
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 dcmf1 version | dcmf0 version
+ * a2 dcmf3 version | dcmf2 version
+ *
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16
+#define INTEL_SIP_SMC_RSU_DCMF_VERSION \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
+ *
+ * Sync call used by SSBL (EL2) to copy DCMF version to ATF memory
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION
+ * a1 dcmf1 version | dcmf0 version
+ * a2 dcmf3 version | dcmf2 version
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION 17
+#define INTEL_SIP_SMC_RSU_COPY_DCMF_VERSION \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_VERSION)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_MAX_RETRY
+ *
+ * Sync call used by service driver at EL1 to query max_retry parameter
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_MAX_RETRY
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 max_retry
+ *
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18
+#define INTEL_SIP_SMC_RSU_MAX_RETRY \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
+ *
+ * Sync call used by SSBL (EL2) to copy RSU 'max retry' to ATF memory
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_COPY_MAX_RETRY
+ * a1 max retry
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY 19
+#define INTEL_SIP_SMC_RSU_COPY_MAX_RETRY \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_MAX_RETRY)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_DCMF_STATUS
+ *
+ * Sync call used by service driver at EL1 to query DCMF status
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_DCMF_STATUS
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 dcmf3 status | dcmf2 status | dcmf1 status | dcmf0 status
+ *
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS 20
+#define INTEL_SIP_SMC_RSU_DCMF_STATUS \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS)
+
+/*
+ * Request INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
+ *
+ * Sync call used by SSBL (EL2) to copy RSU 'dcmf status' to ATF memory
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS
+ * a1 dcmf status
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS 21
+#define INTEL_SIP_SMC_RSU_COPY_DCMF_STATUS \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_COPY_DCMF_STATUS)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_BRIDGES
+ *
+ * Enable/disable the SoC FPGA bridges
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_BRIDGES
+ * a1 Set bridges status:
+ *      0 - Disable
+ *      1 - Enable
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES	50
+#define INTEL_SIP_SMC_HPS_SET_BRIDGES \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_BRIDGES)
+
+/*
+ * Request INTEL_SIP_SMC_MBOX_SEND_CMD
+ *
+ * Send mailbox command to SDM
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_MBOX_SEND_CMD
+ * a1 Mailbox command
+ * a2 64bit physical address pointer to command's arguments
+ * a3 Length of the argument
+ * a4 Urgent command:
+ *      0 - Disable
+ *      1 - Enable
+ * a5 64bit physical address pointer to a buffer for receiving responses
+ * a6 Length of the buffer
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
+ * a1 Status of mailbox response
+ * a2 Received length in the buffer
+ */
+#define INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD	60
+#define INTEL_SIP_SMC_MBOX_SEND_CMD \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_MBOX_SEND_CMD)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_PHYINTF
+ *
+ * Select EMACx PHY interface
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_PHYINTF
+ * a1 EMAC number:
+ *      0 - EMAC0
+ *      1 - EMAC1
+ *      2 - EMAC2
+ * a2 Type of PHY interface:
+ *      0 - GMII_MII
+ *      1 - RGMII
+ *      2 - RMII
+ *      3 - RESET
+ * a3-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_PHYINTF	61
+#define INTEL_SIP_SMC_HPS_SET_PHYINTF \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_PHYINTF)
+
+/*
+ * Request INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK
+ *
+ * Select which phase shift of the clocks (drvsel & smplsel) for SDMMC
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK
+ * a1 Select which phase shift of the clock for cclk_in_drv (drvsel):
+ *      0 - 0 degree
+ *      1 - 45 degrees
+ *      2 - 90 degrees
+ *      3 - 135 degrees
+ *      4 - 180 degrees
+ *      5 - 225 degrees
+ *      6 - 270 degrees
+ *      7 - 315 degrees
+ * a2 Select which phase shift of the clock for cclk_in_sample (smplsel):
+ *      (Same as above)
+ * a3-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_HPS_SET_SDMMC_CCLK	62
+#define INTEL_SIP_SMC_HPS_SET_SDMMC_CCLK \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HPS_SET_SDMMC_CCLK)
+
+#endif