diff mbox series

[6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF

Message ID 20200724105119.13123-7-jagan@amarulasolutions.com
State Changes Requested
Delegated to: Kever Yang
Headers show
Series rockchip: Add Engicam PX30.Core support | expand

Commit Message

Jagan Teki July 24, 2020, 10:51 a.m. UTC
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 10.1" Open Frame is a Carrier board with Capacitive
touch 10.1" open frame from Engicam.

PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Note:
- Linux ML link:
  https://lkml.org/lkml/2020/7/23/523

 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/px30-px30-core-ctouch2-of10.dts  |  21 ++++
 arch/arm/mach-rockchip/px30/Kconfig           |   7 ++
 board/rockchip/evb_px30/MAINTAINERS           |   6 +
 configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/dts/px30-px30-core-ctouch2-of10.dts
 create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig

Comments

Kever Yang Aug. 8, 2020, 9:58 a.m. UTC | #1
在 2020/7/24 下午6:51, Jagan Teki 写道:
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> C.TOUCH 2.0 10.1" Open Frame is a Carrier board with Capacitive
> touch 10.1" open frame from Engicam.
>
> PX30.Core needs to mount on top of this Carrier board for creating
> complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
> Note:
> - Linux ML link:
>    https://lkml.org/lkml/2020/7/23/523
>
>   arch/arm/dts/Makefile                         |   1 +
>   arch/arm/dts/px30-px30-core-ctouch2-of10.dts  |  21 ++++
>   arch/arm/mach-rockchip/px30/Kconfig           |   7 ++
>   board/rockchip/evb_px30/MAINTAINERS           |   6 +
>   configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
>   5 files changed, 143 insertions(+)
>   create mode 100644 arch/arm/dts/px30-px30-core-ctouch2-of10.dts
>   create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 8198808ba5..270de39823 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_MACH_S700) += \
>   dtb-$(CONFIG_ROCKCHIP_PX30) += \
>   	px30-evb.dtb \
>   	px30-firefly.dtb \
> +	px30-px30-core-ctouch2-of10.dtb \
>   	px30-px30-core-edimm2.2.dtb
>   
>   dtb-$(CONFIG_ROCKCHIP_RK3036) += \
> diff --git a/arch/arm/dts/px30-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-px30-core-ctouch2-of10.dts
> new file mode 100644
> index 0000000000..9c957a21e3
> --- /dev/null
> +++ b/arch/arm/dts/px30-px30-core-ctouch2-of10.dts
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
> + * Copyright (c) 2020 Engicam srl
> + * Copyright (c) 2020 Amarula Solutions(India)
> + */
> +
> +/dts-v1/;
> +#include "px30.dtsi"
> +#include "px30-engicam-ctouch2-of10.dtsi"
> +#include "px30-px30-core.dtsi"
> +
> +/ {
> +	model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
> +	compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-px30-core",
> +		     "rockchip,px30";
> +
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +};
> diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
> index f1fa225251..21e7bbcd7f 100644
> --- a/arch/arm/mach-rockchip/px30/Kconfig
> +++ b/arch/arm/mach-rockchip/px30/Kconfig
> @@ -14,6 +14,13 @@ config TARGET_EVB_PX30
>   	  * PX30.Core needs to mount on top of EDIMM2.2 for creating complete
>   	    PX30.Core EDIMM2.2 Starter Kit.
>   
> +	  PX30.Core CTOUCH2 OF10:
> +	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> +	  * CTOUCH2 OF 10 is a Carrier board with Capacitive touch 10.1"
> +	    Open frame from Engicam.
> +	  * PX30.Core needs to mount on top of CTOUCH2 OF10 for creating complete
> +	    PX30.Core C.TOUCH 2.0 10.1\" Open Frame.
> +
>   config ROCKCHIP_BOOT_MODE_REG
>   	default 0xff010200
>   
> diff --git a/board/rockchip/evb_px30/MAINTAINERS b/board/rockchip/evb_px30/MAINTAINERS
> index 48fba4e046..459626e679 100644
> --- a/board/rockchip/evb_px30/MAINTAINERS
> +++ b/board/rockchip/evb_px30/MAINTAINERS
> @@ -11,3 +11,9 @@ M:	Jagan Teki <jagan@amarulasolutions.com>
>   M:	Suniel Mahesh <sunil@amarulasolutions.com>
>   S:	Maintained
>   F:	configs/px30-core-edimm2.2-px30_defconfig
> +
> +PX30-Core-CTOUCH2-OF10
> +M:	Jagan Teki <jagan@amarulasolutions.com>
> +M:	Suniel Mahesh <sunil@amarulasolutions.com>
> +S:	Maintained
> +F:	configs/px30-core-ctouch2-of10-px30_defconfig
> diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
> new file mode 100644
> index 0000000000..b87b61f740
> --- /dev/null
> +++ b/configs/px30-core-ctouch2-of10-px30_defconfig
> @@ -0,0 +1,108 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_TEXT_BASE=0x00000000
> +CONFIG_ROCKCHIP_PX30=y
> +CONFIG_TARGET_EVB_PX30=y
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xFF160000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +# CONFIG_CONSOLE_MUX is not set
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2-of10.dtb"
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_BOOTROM_SUPPORT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +# CONFIG_TPL_BANNER_PRINT is not set
> +CONFIG_SPL_CRC32_SUPPORT=y
> +CONFIG_SPL_ATF=y
> +# CONFIG_TPL_FRAMEWORK is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_LZMADEC is not set
> +# CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_GPT=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_CMD_MISC is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2-of10"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_BUF_SIZE=0x04000000
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_OTP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_ROCKCHIP_SDRAM_COMMON=y
> +CONFIG_DM_RESET=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> +# CONFIG_SPECIFY_CONSOLE_INDEX is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_SOUND=y
> +CONFIG_SYSRESET=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_LCD=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
> +CONFIG_LZO=y
> +CONFIG_ERRNO_STR=y
> +# CONFIG_EFI_LOADER is not set
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8198808ba5..270de39823 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -72,6 +72,7 @@  dtb-$(CONFIG_MACH_S700) += \
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
 	px30-firefly.dtb \
+	px30-px30-core-ctouch2-of10.dtb \
 	px30-px30-core-edimm2.2.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3036) += \
diff --git a/arch/arm/dts/px30-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-px30-core-ctouch2-of10.dts
new file mode 100644
index 0000000000..9c957a21e3
--- /dev/null
+++ b/arch/arm/dts/px30-px30-core-ctouch2-of10.dts
@@ -0,0 +1,21 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2-of10.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index f1fa225251..21e7bbcd7f 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -14,6 +14,13 @@  config TARGET_EVB_PX30
 	  * PX30.Core needs to mount on top of EDIMM2.2 for creating complete
 	    PX30.Core EDIMM2.2 Starter Kit.
 
+	  PX30.Core CTOUCH2 OF10:
+	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+	  * CTOUCH2 OF 10 is a Carrier board with Capacitive touch 10.1"
+	    Open frame from Engicam.
+	  * PX30.Core needs to mount on top of CTOUCH2 OF10 for creating complete
+	    PX30.Core C.TOUCH 2.0 10.1\" Open Frame.
+
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff010200
 
diff --git a/board/rockchip/evb_px30/MAINTAINERS b/board/rockchip/evb_px30/MAINTAINERS
index 48fba4e046..459626e679 100644
--- a/board/rockchip/evb_px30/MAINTAINERS
+++ b/board/rockchip/evb_px30/MAINTAINERS
@@ -11,3 +11,9 @@  M:	Jagan Teki <jagan@amarulasolutions.com>
 M:	Suniel Mahesh <sunil@amarulasolutions.com>
 S:	Maintained
 F:	configs/px30-core-edimm2.2-px30_defconfig
+
+PX30-Core-CTOUCH2-OF10
+M:	Jagan Teki <jagan@amarulasolutions.com>
+M:	Suniel Mahesh <sunil@amarulasolutions.com>
+S:	Maintained
+F:	configs/px30-core-ctouch2-of10-px30_defconfig
diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
new file mode 100644
index 0000000000..b87b61f740
--- /dev/null
+++ b/configs/px30-core-ctouch2-of10-px30_defconfig
@@ -0,0 +1,108 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_EVB_PX30=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2-of10.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MISC is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2-of10"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
+# CONFIG_EFI_LOADER is not set