diff mbox series

[03/11] imx8m: add sdhc/nand/ecspi clk api

Message ID 20200709084042.8234-4-peng.fan@nxp.com
State Accepted
Commit 3c1c28d4e032d33697b95fc88152df8a679f44be
Headers show
Series imx8m: soc/clk update | expand

Commit Message

Peng Fan July 9, 2020, 8:40 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Current DM CLK is a bit complicated, for simplity, let DM clk only
support enable/disable/get_rate. For the expected rate settings,
we use non-DM clk to do that. Then we could have simple DM clk for
i.MX and could also share between SPL/U-Boot proper.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm/mach-imx/imx8m/clock_imx8mm.c | 66 ++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 0a8208606d..68effbd54f 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -317,6 +317,72 @@  void init_wdog_clk(void)
 	clock_enable(CCGR_WDOG3, 1);
 }
 
+void init_clk_usdhc(u32 index)
+{
+	/*
+	 * set usdhc clock root
+	 * sys pll1 400M
+	 */
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_USDHC1, 0);
+		clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_USDHC2, 0);
+		clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC2, 1);
+		return;
+	case 2:
+		clock_enable(CCGR_USDHC3, 0);
+		clock_set_target_val(USDHC3_CLK_ROOT, CLK_ROOT_ON |
+				     CLK_ROOT_SOURCE_SEL(1));
+		clock_enable(CCGR_USDHC3, 1);
+		return;
+	default:
+		printf("Invalid usdhc index\n");
+		return;
+	}
+}
+
+void init_clk_ecspi(u32 index)
+{
+	switch (index) {
+	case 0:
+		clock_enable(CCGR_ECSPI1, 0);
+		clock_set_target_val(ECSPI1_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI1, 1);
+		return;
+	case 1:
+		clock_enable(CCGR_ECSPI2, 0);
+		clock_set_target_val(ECSPI2_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI2, 1);
+	case 2:
+		clock_enable(CCGR_ECSPI3, 0);
+		clock_set_target_val(ECSPI3_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(0));
+		clock_enable(CCGR_ECSPI3, 1);
+		return;
+	default:
+		printf("Invalid ecspi index\n");
+		return;
+	}
+}
+
+void init_nand_clk(void)
+{
+	/*
+	 * set rawnand root
+	 * sys pll1 400M
+	 */
+	clock_enable(CCGR_RAWNAND, 0);
+	clock_set_target_val(NAND_CLK_ROOT, CLK_ROOT_ON |
+		CLK_ROOT_SOURCE_SEL(3) | CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4)); /* 100M */
+	clock_enable(CCGR_RAWNAND, 1);
+}
+
 int clock_init(void)
 {
 	u32 val_cfg0;