diff mbox series

sunxi: Add support for using UART4 as console on A64

Message ID 20200707092937.26725-1-gediz.aydindogmus@genemek.com
State Changes Requested
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series sunxi: Add support for using UART4 as console on A64 | expand

Commit Message

Nazım Gediz AYDINDOĞMUŞ July 7, 2020, 9:29 a.m. UTC
Add some additional tests and definitions to be able to use UART4 of A64 and do not let it get in conflict with R_UART of some other SoCs (e.g. A23).

Signed-off-by: Nazım Gediz Aydındoğmuş <gediz.aydindogmus@genemek.com>
---

 arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
 arch/arm/mach-sunxi/board.c            | 4 ++++
 arch/arm/mach-sunxi/clock_sun6i.c      | 3 ++-
 include/configs/sunxi-common.h         | 4 ++++
 4 files changed, 11 insertions(+), 1 deletion(-)

Comments

Maxime Ripard July 7, 2020, 1:35 p.m. UTC | #1
Hi,

On Tue, Jul 07, 2020 at 12:29:37PM +0300, Nazım Gediz Aydındoğmuş wrote:
> Add some additional tests and definitions to be able to use UART4 of A64 and do not let it get in conflict with R_UART of some other SoCs (e.g. A23).

The commit log should be wrapped at 80 characters, and you should
provide a version number (using the -v option of git send-email) and a
change log from the previous version.

Maxime
diff mbox series

Patch

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index a646ea6a3c..1407aff25f 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -176,6 +176,7 @@  enum sunxi_gpio_number {
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
 #define SUNXI_GPD_PWM		2
+#define SUN50I_GPD_UART4	3
 
 #define SUN5I_GPE_SDC2		3
 #define SUN8I_GPE_TWI2		3
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index f40fccd8f8..7d95b7dd29 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -140,6 +140,10 @@  static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
 	sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN50I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(2), SUN50I_GPD_UART4);
+	sunxi_gpio_set_cfgpin(SUNXI_GPD(3), SUN50I_GPD_UART4);
+	sunxi_gpio_set_pull(SUNXI_GPD(3), SUNXI_GPIO_PULL_UP);
 #else
 #error Unsupported console port number. Please fix pin mux settings in board.c
 #endif
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index 8e84062bd7..1f13b96be3 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -83,7 +83,8 @@  void clock_init_sec(void)
 
 void clock_init_uart(void)
 {
-#if CONFIG_CONS_INDEX < 5
+#if CONFIG_CONS_INDEX < 5 || \
+    defined(CONFIG_MACH_SUN50I) && CONFIG_CONS_INDEX < 6
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 5b0bec0561..1324d60f60 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -45,8 +45,12 @@ 
 # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
 # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
 # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
+#if defined(CONFIG_MACH_SUN50I)
+# define CONFIG_SYS_NS16550_COM5		SUNXI_UART4_BASE
+#else
 # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
 #endif
+#endif
 
 /* CPU */
 #define COUNTER_FREQUENCY		24000000