diff mbox series

[2/3] rockchip: px30: sync Odroid Go Advance devicetree from Linux

Message ID 20200701092842.84121-2-heiko@sntech.de
State Accepted
Delegated to: Kever Yang
Headers show
Series [1/3] rockchip: px30: sync the main rk3326 dtsi from mainline | expand

Commit Message

Heiko Stübner July 1, 2020, 9:28 a.m. UTC
From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

Get the devicetree from mainline Linux and include it for U-Boot uses.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/rk3326-odroid-go2.dts | 716 +++++++++++++++++++++++++++++
 2 files changed, 718 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/rk3326-odroid-go2.dts

Comments

Kever Yang July 8, 2020, 10:02 a.m. UTC | #1
On 2020/7/1 下午5:28, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
>
> Get the devicetree from mainline Linux and include it for U-Boot uses.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

Thanks,
- Kever

> ---
>   arch/arm/dts/Makefile              |   3 +-
>   arch/arm/dts/rk3326-odroid-go2.dts | 716 +++++++++++++++++++++++++++++
>   2 files changed, 718 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/dts/rk3326-odroid-go2.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index db7859cd6c..f274c1232a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -71,7 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \
>   
>   dtb-$(CONFIG_ROCKCHIP_PX30) += \
>   	px30-evb.dtb \
> -	px30-firefly.dtb
> +	px30-firefly.dtb \
> +	rk3326-odroid-go2.dtb
>   
>   dtb-$(CONFIG_ROCKCHIP_RK3036) += \
>   	rk3036-sdk.dtb
> diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts
> new file mode 100644
> index 0000000000..8cd4688c49
> --- /dev/null
> +++ b/arch/arm/dts/rk3326-odroid-go2.dts
> @@ -0,0 +1,716 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Hardkernel Co., Ltd
> + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3326.dtsi"
> +
> +/ {
> +	model = "ODROID-GO Advance";
> +	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
> +
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		power-supply = <&vcc_bl>;
> +		pwms = <&pwm1 0 25000 0>;
> +	};
> +
> +	adc-joystick {
> +		compatible = "adc-joystick";
> +		io-channels = <&saradc 1>,
> +			      <&saradc 2>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		axis@0 {
> +			reg = <0>;
> +			abs-range = <172 772>;
> +			abs-fuzz = <10>;
> +			abs-flat = <10>;
> +			linux,code = <ABS_X>;
> +		};
> +
> +		axis@1 {
> +			reg = <1>;
> +			abs-range = <278 815>;
> +			abs-fuzz = <10>;
> +			abs-flat = <10>;
> +			linux,code = <ABS_Y>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&btn_pins>;
> +
> +		/*
> +		 *      *** ODROIDGO2-Advance Switch layout ***
> +		 * |------------------------------------------------|
> +		 * | sw15                                      sw16 |
> +		 * |------------------------------------------------|
> +		 * |     sw1      |-------------------|      sw8    |
> +		 * |  sw3   sw4   |                   |   sw7   sw5 |
> +		 * |     sw2      |    LCD Display    |      sw6    |
> +		 * |              |                   |             |
> +		 * |              |-------------------|             |
> +		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
> +		 * |------------------------------------------------|
> +		 */
> +
> +		sw1 {
> +			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
> +			label = "DPAD-UP";
> +			linux,code = <BTN_DPAD_UP>;
> +		};
> +		sw2 {
> +			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
> +			label = "DPAD-DOWN";
> +			linux,code = <BTN_DPAD_DOWN>;
> +		};
> +		sw3 {
> +			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
> +			label = "DPAD-LEFT";
> +			linux,code = <BTN_DPAD_LEFT>;
> +		};
> +		sw4 {
> +			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
> +			label = "DPAD-RIGHT";
> +			linux,code = <BTN_DPAD_RIGHT>;
> +		};
> +		sw5 {
> +			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
> +			label = "BTN-A";
> +			linux,code = <BTN_EAST>;
> +		};
> +		sw6 {
> +			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
> +			label = "BTN-B";
> +			linux,code = <BTN_SOUTH>;
> +		};
> +		sw7 {
> +			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
> +			label = "BTN-Y";
> +			linux,code = <BTN_WEST>;
> +		};
> +		sw8 {
> +			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
> +			label = "BTN-X";
> +			linux,code = <BTN_NORTH>;
> +		};
> +		sw9 {
> +			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
> +			label = "F1";
> +			linux,code = <BTN_TRIGGER_HAPPY1>;
> +		};
> +		sw10 {
> +			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
> +			label = "F2";
> +			linux,code = <BTN_TRIGGER_HAPPY2>;
> +		};
> +		sw11 {
> +			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
> +			label = "F3";
> +			linux,code = <BTN_TRIGGER_HAPPY3>;
> +		};
> +		sw12 {
> +			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
> +			label = "F4";
> +			linux,code = <BTN_TRIGGER_HAPPY4>;
> +		};
> +		sw13 {
> +			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
> +			label = "F5";
> +			linux,code = <BTN_TRIGGER_HAPPY5>;
> +		};
> +		sw14 {
> +			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
> +			label = "F6";
> +			linux,code = <BTN_TRIGGER_HAPPY6>;
> +		};
> +		sw15 {
> +			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
> +			label = "TOP-LEFT";
> +			linux,code = <BTN_TL>;
> +		};
> +		sw16 {
> +			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
> +			label = "TOP-RIGHT";
> +			linux,code = <BTN_TR>;
> +		};
> +	};
> +
> +	leds: gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&blue_led_pin>;
> +
> +		blue_led: led-0 {
> +			label = "blue:heartbeat";
> +			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	rk817-sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,name = "rockchip,rk817-codec";
> +		simple-audio-card,mclk-fs = <256>;
> +		simple-audio-card,widgets =
> +			"Microphone", "Mic Jack",
> +			"Headphone", "Headphone Jack";
> +		simple-audio-card,routing =
> +			"MIC_IN", "Mic Jack",
> +			"Headphone Jack", "HPOL",
> +			"Headphone Jack", "HPOR";
> +		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
> +		simple-audio-card,codec-hp-det = <1>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s1_2ch>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&rk817_codec>;
> +		};
> +	};
> +
> +	vccsys: vccsys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v8_sys";
> +		regulator-always-on;
> +		regulator-min-microvolt = <3800000>;
> +		regulator-max-microvolt = <3800000>;
> +	};
> +
> +	vcc_host: vcc_host {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_host";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +
> +		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +		vin-supply = <&vccsys>;
> +	};
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cru {
> +	assigned-clocks = <&cru PLL_NPLL>,
> +		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> +		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
> +		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
> +		<&cru PLL_CPLL>;
> +
> +	assigned-clock-rates = <1188000000>,
> +		<200000000>, <200000000>,
> +		<150000000>, <150000000>,
> +		<100000000>, <200000000>,
> +		<17000000>;
> +};
> +
> +&display_subsystem {
> +	status = "okay";
> +};
> +
> +&dsi {
> +	status = "okay";
> +
> +	ports {
> +		mipi_out: port@1 {
> +			reg = <1>;
> +
> +			mipi_out_panel: endpoint {
> +				remote-endpoint = <&mipi_in_panel>;
> +			};
> +		};
> +	};
> +
> +	panel@0 {
> +		compatible = "elida,kd35t133";
> +		reg = <0>;
> +		backlight = <&backlight>;
> +		iovcc-supply = <&vcc_lcd>;
> +		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> +		vdd-supply = <&vcc_lcd>;
> +
> +		port {
> +			mipi_in_panel: endpoint {
> +				remote-endpoint = <&mipi_out_panel>;
> +			};
> +		};
> +	};
> +};
> +
> +&dsi_dphy {
> +	status = "okay";
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_logic>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	i2c-scl-falling-time-ns = <16>;
> +	i2c-scl-rising-time-ns = <280>;
> +	status = "okay";
> +
> +	rk817: pmic@20 {
> +		compatible = "rockchip,rk817";
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default", "pmic-sleep",
> +				"pmic-power-off", "pmic-reset";
> +		pinctrl-0 = <&pmic_int>;
> +		pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
> +		pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
> +		pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +		#clock-cells = <1>;
> +		clock-output-names = "rk808-clkout1", "xin32k";
> +
> +		vcc1-supply = <&vccsys>;
> +		vcc2-supply = <&vccsys>;
> +		vcc3-supply = <&vccsys>;
> +		vcc4-supply = <&vccsys>;
> +		vcc5-supply = <&vccsys>;
> +		vcc6-supply = <&vccsys>;
> +		vcc7-supply = <&vccsys>;
> +
> +		pinctrl_rk8xx: pinctrl_rk8xx {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			rk817_ts_gpio1: rk817_ts_gpio1 {
> +				pins = "gpio_ts";
> +				function = "pin_fun1";
> +				/* output-low; */
> +				/* input-enable; */
> +			};
> +
> +			rk817_gt_gpio2: rk817_gt_gpio2 {
> +				pins = "gpio_gt";
> +				function = "pin_fun1";
> +			};
> +
> +			rk817_pin_ts: rk817_pin_ts {
> +				pins = "gpio_ts";
> +				function = "pin_fun0";
> +			};
> +
> +			rk817_pin_gt: rk817_pin_gt {
> +				pins = "gpio_gt";
> +				function = "pin_fun0";
> +			};
> +
> +			rk817_slppin_null: rk817_slppin_null {
> +				pins = "gpio_slp";
> +				function = "pin_fun0";
> +			};
> +
> +			rk817_slppin_slp: rk817_slppin_slp {
> +				pins = "gpio_slp";
> +				function = "pin_fun1";
> +			};
> +
> +			rk817_slppin_pwrdn: rk817_slppin_pwrdn {
> +				pins = "gpio_slp";
> +				function = "pin_fun2";
> +			};
> +
> +			rk817_slppin_rst: rk817_slppin_rst {
> +				pins = "gpio_slp";
> +				function = "pin_fun3";
> +			};
> +		};
> +
> +		regulators {
> +			vdd_logic: DCDC_REG1 {
> +				regulator-name = "vdd_logic";
> +				regulator-min-microvolt = <950000>;
> +				regulator-max-microvolt = <1150000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <950000>;
> +				};
> +			};
> +
> +			vdd_arm: DCDC_REG2 {
> +				regulator-name = "vdd_arm";
> +				regulator-min-microvolt = <950000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <950000>;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3: DCDC_REG4 {
> +				regulator-name = "vcc_3v3";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_1v8: LDO_REG2 {
> +				regulator-name = "vcc_1v8";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vdd_1v0: LDO_REG3 {
> +				regulator-name = "vdd_1v0";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1000000>;
> +				};
> +			};
> +
> +			vcc3v3_pmu: LDO_REG4 {
> +				regulator-name = "vcc3v3_pmu";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vccio_sd: LDO_REG5 {
> +				regulator-name = "vccio_sd";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_sd: LDO_REG6 {
> +				regulator-name = "vcc_sd";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_bl: LDO_REG7 {
> +				regulator-name = "vcc_bl";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_lcd: LDO_REG8 {
> +				regulator-name = "vcc_lcd";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <2800000>;
> +				};
> +			};
> +
> +			vcc_cam: LDO_REG9 {
> +				regulator-name = "vcc_cam";
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <3000000>;
> +				};
> +			};
> +		};
> +
> +		battery {
> +			compatible = "rk817,battery";
> +			ocv_table = <3500 3625 3685 3697 3718 3735 3748
> +			3760 3774 3788 3802 3816 3834 3853
> +			3877 3908 3946 3975 4018 4071 4106>;
> +
> +			/* KPL605475 Battery Spec */
> +			/*
> +				Capacity : 3.7V 3000mA
> +				Normal Voltage = 3.7V
> +				Cut-Off Voltage : 3.1V
> +				Internal Impedance : 180 mOhm
> +				Charging Voltage : 4.2V
> +				Charging Voltage Max : 4.25V
> +				Sample resister : 10 mohm
> +			*/
> +			design_capacity = <3000>;
> +			design_qmax = <3000>;
> +			bat_res = <180>;
> +			sleep_enter_current = <300>;
> +			sleep_exit_current = <300>;
> +			sleep_filter_current = <100>;
> +			power_off_thresd = <3500>;
> +			zero_algorithm_vol = <3700>;
> +			max_soc_offset = <60>;
> +			monitor_sec = <5>;
> +			virtual_power = <0>;
> +			sample_res = <10>;
> +		};
> +
> +		charger {
> +			compatible = "rk817,charger";
> +			min_input_voltage = <4500>;
> +			max_input_current = <1500>;
> +			max_chrg_current = <2000>;
> +			max_chrg_voltage = <4200>;
> +			chrg_term_mode = <0>;
> +			chrg_finish_cur = <300>;
> +			virtual_power = <0>;
> +			sample_res = <10>;
> +
> +			/* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
> +			dc_det_gpio  = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> +			chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> +
> +			extcon = <&u2phy>;
> +		};
> +
> +		rk817_codec: codec {
> +			#sound-dai-cells = <0>;
> +			compatible = "rockchip,rk817-codec";
> +			clocks = <&cru SCLK_I2S1_OUT>;
> +			clock-names = "mclk";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2s1_2ch_mclk>;
> +			hp-volume = <20>;
> +			spk-volume = <3>;
> +			status = "okay";
> +		};
> +	};
> +};
> +
> +/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +/* I2S 1 Channel Used */
> +&i2s1_2ch {
> +	status = "okay";
> +};
> +
> +&io_domains {
> +	vccio1-supply = <&vcc_3v3>;
> +	vccio2-supply = <&vccio_sd>;
> +	vccio3-supply = <&vcc_3v3>;
> +	vccio4-supply = <&vcc_3v3>;
> +	vccio5-supply = <&vcc_3v3>;
> +	vccio6-supply = <&vcc_3v3>;
> +	status = "okay";
> +};
> +
> +&pmu_io_domains {
> +	pmuio1-supply = <&vcc3v3_pmu>;
> +	pmuio2-supply = <&vcc3v3_pmu>;
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&vcc_1v8>;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	card-detect-delay = <200>;
> +	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	status = "okay";
> +};
> +
> +&u2phy {
> +	status = "okay";
> +
> +	u2phy_host: host-port {
> +		status = "okay";
> +	};
> +
> +	u2phy_otg: otg-port {
> +		status = "disabled";
> +	};
> +};
> +
> +&usb20_otg {
> +	status = "okay";
> +};
> +
> +/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_xfer &uart1_cts>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2m1_xfer>;
> +	status = "okay";
> +};
> +
> +&vopb {
> +	status = "okay";
> +};
> +
> +&vopb_mmu {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	btns {
> +		btn_pins: btn-pins {
> +			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> +					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	headphone {
> +		hp_det: hp-det {
> +			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	leds {
> +		blue_led_pin: blue-led-pin {
> +			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		dc_det: dc-det {
> +			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pmic_int: pmic-int {
> +			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		soc_slppin_gpio: soc_slppin_gpio {
> +			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
> +		};
> +
> +		soc_slppin_rst: soc_slppin_rst {
> +			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
> +		};
> +
> +		soc_slppin_slp: soc_slppin_slp {
> +			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
> +		};
> +	};
> +};
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index db7859cd6c..f274c1232a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -71,7 +71,8 @@  dtb-$(CONFIG_MACH_S700) += \
 
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
-	px30-firefly.dtb
+	px30-firefly.dtb \
+	rk3326-odroid-go2.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3036) += \
 	rk3036-sdk.dtb
diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts
new file mode 100644
index 0000000000..8cd4688c49
--- /dev/null
+++ b/arch/arm/dts/rk3326-odroid-go2.dts
@@ -0,0 +1,716 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-range = <172 772>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-range = <278 815>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		/*
+		 *      *** ODROIDGO2-Advance Switch layout ***
+		 * |------------------------------------------------|
+		 * | sw15                                      sw16 |
+		 * |------------------------------------------------|
+		 * |     sw1      |-------------------|      sw8    |
+		 * |  sw3   sw4   |                   |   sw7   sw5 |
+		 * |     sw2      |    LCD Display    |      sw6    |
+		 * |              |                   |             |
+		 * |              |-------------------|             |
+		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
+		 * |------------------------------------------------|
+		 */
+
+		sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rk817-codec";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,codec-hp-det = <1>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817_codec>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vccsys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "elida,kd35t133";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
+		pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
+		pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		pinctrl_rk8xx: pinctrl_rk8xx {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			rk817_ts_gpio1: rk817_ts_gpio1 {
+				pins = "gpio_ts";
+				function = "pin_fun1";
+				/* output-low; */
+				/* input-enable; */
+			};
+
+			rk817_gt_gpio2: rk817_gt_gpio2 {
+				pins = "gpio_gt";
+				function = "pin_fun1";
+			};
+
+			rk817_pin_ts: rk817_pin_ts {
+				pins = "gpio_ts";
+				function = "pin_fun0";
+			};
+
+			rk817_pin_gt: rk817_pin_gt {
+				pins = "gpio_gt";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_null: rk817_slppin_null {
+				pins = "gpio_slp";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_slp: rk817_slppin_slp {
+				pins = "gpio_slp";
+				function = "pin_fun1";
+			};
+
+			rk817_slppin_pwrdn: rk817_slppin_pwrdn {
+				pins = "gpio_slp";
+				function = "pin_fun2";
+			};
+
+			rk817_slppin_rst: rk817_slppin_rst {
+				pins = "gpio_slp";
+				function = "pin_fun3";
+			};
+		};
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+
+		battery {
+			compatible = "rk817,battery";
+			ocv_table = <3500 3625 3685 3697 3718 3735 3748
+			3760 3774 3788 3802 3816 3834 3853
+			3877 3908 3946 3975 4018 4071 4106>;
+
+			/* KPL605475 Battery Spec */
+			/*
+				Capacity : 3.7V 3000mA
+				Normal Voltage = 3.7V
+				Cut-Off Voltage : 3.1V
+				Internal Impedance : 180 mOhm
+				Charging Voltage : 4.2V
+				Charging Voltage Max : 4.25V
+				Sample resister : 10 mohm
+			*/
+			design_capacity = <3000>;
+			design_qmax = <3000>;
+			bat_res = <180>;
+			sleep_enter_current = <300>;
+			sleep_exit_current = <300>;
+			sleep_filter_current = <100>;
+			power_off_thresd = <3500>;
+			zero_algorithm_vol = <3700>;
+			max_soc_offset = <60>;
+			monitor_sec = <5>;
+			virtual_power = <0>;
+			sample_res = <10>;
+		};
+
+		charger {
+			compatible = "rk817,charger";
+			min_input_voltage = <4500>;
+			max_input_current = <1500>;
+			max_chrg_current = <2000>;
+			max_chrg_voltage = <4200>;
+			chrg_term_mode = <0>;
+			chrg_finish_cur = <300>;
+			virtual_power = <0>;
+			sample_res = <10>;
+
+			/* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
+			dc_det_gpio  = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+
+			extcon = <&u2phy>;
+		};
+
+		rk817_codec: codec {
+			#sound-dai-cells = <0>;
+			compatible = "rockchip,rk817-codec";
+			clocks = <&cru SCLK_I2S1_OUT>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_2ch_mclk>;
+			hp-volume = <20>;
+			spk-volume = <3>;
+			status = "okay";
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};