diff mbox series

[v12,18/18] doc: sifive: fu540: Add description for OpenSBI generic platform

Message ID 20200525073333.14131-19-pragnesh.patel@sifive.com
State Superseded
Delegated to: Andes
Headers show
Series RISC-V SiFive FU540 support SPL | expand

Commit Message

Pragnesh Patel May 25, 2020, 7:33 a.m. UTC
OpenSBI generic platform support provides platform specific
functionality based on the FDT passed by previous booting stage.

Depends on OpenSBI commit:
platform: Add generic FDT based platform support
(sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
---
 doc/board/sifive/fu540.rst | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 5a37e0021d..4d7fded699 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -20,17 +20,6 @@  The support for following drivers are already enabled:
 4. SiFive SPI Driver.
 5. MMC SPI Driver for MMC/SD support.
 
-TODO:
-
-1. U-Boot expects the serial console device entry to be present under /chosen
-   DT node. Without a serial console U-Boot will panic. Example:
-
-.. code-block:: none
-
-   chosen {
-        stdout-path = "/soc/serial@10010000:115200";
-   };
-
 Booting from MMC using FSBL
 ---------------------------
 
@@ -61,7 +50,7 @@  firmware. We need to compile OpenSBI with below command:
 
 .. code-block:: none
 
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
+	make PLATFORM=generic FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
 
 More detailed description of steps required to build FW_PAYLOAD firmware
 is beyond the scope of this document. Please refer OpenSBI documenation.