diff mbox series

[v1,05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)

Message ID 20200424165012.31915-6-s.nawrocki@samsung.com
State Superseded
Delegated to: Matthias Brugger
Headers show
Series USB host support for Raspberry Pi 4 board | expand

Commit Message

Sylwester Nawrocki April 24, 2020, 4:50 p.m. UTC 
From: Marek Szyprowski <m.szyprowski@samsung.com>

Create a non-cacheable mapping for the 0x600000000 physical memory region,
where MMIO registers for the PCIe XHCI controller are instantiated by the
PCIe bridge.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
Changes since RFC:
 - none.
---
 arch/arm/mach-bcm283x/init.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

Comments

Nicolas Saenz Julienne April 27, 2020, 10:20 a.m. UTC | #1 
On Fri, 2020-04-24 at 18:50 +0200, Sylwester Nawrocki wrote:
> From: Marek Szyprowski <m.szyprowski@samsung.com>
> 
> Create a non-cacheable mapping for the 0x600000000 physical memory region,
> where MMIO registers for the PCIe XHCI controller are instantiated by the
> PCIe bridge.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> Changes since RFC:
>  - none.

Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Regards,
Nicolas
diff mbox series

Patch

diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index 4295356..6a748da 100644
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -11,10 +11,15 @@ 
 #include <dm/device.h>
 #include <fdt_support.h>
 
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS	0x600000000UL
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE	0x800000UL
+
 #ifdef CONFIG_ARM64
 #include <asm/armv8/mmu.h>
 
-static struct mm_region bcm283x_mem_map[] = {
+#define MAX_MAP_MAX_ENTRIES (4)
+
+static struct mm_region bcm283x_mem_map[MAX_MAP_MAX_ENTRIES] = {
 	{
 		.virt = 0x00000000UL,
 		.phys = 0x00000000UL,
@@ -34,7 +39,7 @@  static struct mm_region bcm283x_mem_map[] = {
 	}
 };
 
-static struct mm_region bcm2711_mem_map[] = {
+static struct mm_region bcm2711_mem_map[MAX_MAP_MAX_ENTRIES] = {
 	{
 		.virt = 0x00000000UL,
 		.phys = 0x00000000UL,
@@ -49,6 +54,13 @@  static struct mm_region bcm2711_mem_map[] = {
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
+		.virt = BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+		.phys = BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+		.size = BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
 		/* List terminator */
 		0,
 	}
@@ -71,7 +83,7 @@  static void _rpi_update_mem_map(struct mm_region *pd)
 {
 	int i;
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < MAX_MAP_MAX_ENTRIES; i++) {
 		mem_map[i].virt = pd[i].virt;
 		mem_map[i].phys = pd[i].phys;
 		mem_map[i].size = pd[i].size;