@@ -576,6 +576,8 @@ ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
dtb-y += \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
+ imx6dl-aristainetos2b_4.dtb \
+ imx6dl-aristainetos2b_7.dtb \
imx6dl-brppt2.dtb \
imx6dl-dhcom-pdk2.dtb \
imx6dl-icore.dtb \
new file mode 100644
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2b-u-boot.dtsi>
+
+&lcd_panel {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp>;
+ enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+};
new file mode 100644
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2b board
+ * parts for 4.3 inch LG display on spi1 port1
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "imx6dl-aristainetos2_4.dtsi"
+#include "imx6qdl-aristainetos2b.dtsi"
+
+/ {
+ model = "aristainetos2b i.MX6 Dual Lite Board 4";
+ compatible = "fsl,imx6dl";
+
+};
+
+&ecspi1 {
+ lcd_panel: display@0 {
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <1>;
+ power-on-delay = <10>;
+
+ display-timings {
+ 480x800p57 {
+ native-mode;
+ clock-frequency = <27000027>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <10>;
+ hback-porch = <59>;
+ hsync-len = <10>;
+ vback-porch = <15>;
+ vfront-porch = <15>;
+ vsync-len = <15>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2b-u-boot.dtsi>
+/ {
+ vdd_panel_reg: regulator-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "panel_regulator";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&panel0 {
+ power-supply = <&vdd_panel_reg>;
+};
new file mode 100644
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include "imx6dl-aristainetos2_7.dtsi"
+#include "imx6qdl-aristainetos2b.dtsi"
+
+/ {
+ model = "aristainetos2b i.MX6 Dual Lite Board 7";
+ compatible = "fsl,imx6dl";
+};
new file mode 100644
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &uart2;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ };
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+ u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+ u-boot,dm-pre-reloc;
+};
+
+&backlight {
+ pwms = <&pwm1 0 300000>;
+ default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect / reset pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+ u-boot,dm-pre-reloc;
+
+ wp_spi_nor {
+ gpio-hog;
+ output-high;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset_spi_nor {
+ gpio-hog;
+ output-high;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpio4 {
+ u-boot,dm-pre-reloc;
+};
+
+&ecspi1 {
+ u-boot,dm-pre-reloc;
+};
+
+&flash {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+ u-boot,dm-pre-reloc;
+};
new file mode 100644
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2b board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "imx6qdl-aristainetos2-common.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio>;
+
+ LED_blue {
+ label = "led_blue";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_green {
+ label = "led_green";
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_red {
+ label = "led_red";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_yellow {
+ label = "led_yellow";
+ gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ LED_ena {
+ label = "led_ena";
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio4 10 GPIO_ACTIVE_HIGH
+ &gpio4 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+ pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&ecspi4 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ status = "okay";
+};
+
+&i2c1 {
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+};
+
+&gpio7 {
+ sd2_driver_ena {
+ gpio-hog;
+ output-high;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ /*
+ * comment out this line to make the WiFi Eval-Module work in
+ * SD-Slot2, and add line:
+ * broken-cd;
+ * causes 6% CPU load if no WiFi module installed (polling)
+ */
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* SS0# */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+ /* SS1# */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+ /* SS2# */
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
+ /* WP pin NOR Flash */
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
+ /* Flash nReset */
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ /* led enable */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
+ /* LCD power enable */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
+ /* led yellow */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
+ /* led red */
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
+ /* led green */
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
+ /* led blue */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
+ /* Profibus IRQ */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ /* FPGA IRQ currently unused*/
+ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
+ /* Display reset because of clock failure */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
+ /* spi bus #2 SS driver enable */
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
+ /* RST_LOC# PHY reset input (has pull-down!)*/
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
+ /* Touchscreen IRQ */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+ /* PCIe reset */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
+ /* make sure pin is GPIO and not ENET_REF_CLK */
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
+ /* SD2 level shifter output enable / SD2 Reset# */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ /* SD1 card detect input */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ /* SD1 write protect input */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
+ /* SD2 card detect input */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ /* SD2 write protect input */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ >;
+ };
+};
@@ -136,6 +136,17 @@ config TARGET_ARISTAINETOS2
imply CMD_SATA
imply CMD_DM
+config TARGET_ARISTAINETOS2B
+ bool "Support aristainetos2-revB"
+ select BOARD_LATE_INIT
+ select MX6DL
+ select SYS_I2C_MXC
+ select MXC_UART
+ select FEC_MXC
+ select DM
+ imply CMD_SATA
+ imply CMD_DM
+
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
select BOARD_LATE_INIT
@@ -9,3 +9,15 @@ config SYS_BOARD_VERSION
default 2
endif
+
+if TARGET_ARISTAINETOS2B
+
+source "board/aristainetos/common/Kconfig"
+
+config SYS_BOARD
+ default "aristainetos"
+
+config SYS_BOARD_VERSION
+ default 3
+
+endif
@@ -4,6 +4,7 @@ S: Maintained
F: board/aristainetos/
F: include/configs/aristainetos2.h
F: configs/aristainetos2_defconfig
+F: configs/aristainetos2b_defconfig
F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
@@ -13,3 +14,9 @@ F: arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_4.dts
F: arch/arm/dts/imx6dl-aristainetos2_4.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2b_4.dts
+F: arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi
+F: arch/arm/dts/imx6dl-aristainetos2b_7.dts
+F: arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi
+F: arch/arm/dts/imx6qdl-aristainetos2b.dtsi
@@ -3,6 +3,7 @@ config SYS_BOARD_VERSION
help
version of aristainetos board version
2 version 2
+ 3 version 2b
config SYS_I2C_MXC_I2C1
default y
new file mode 100644
@@ -0,0 +1,115 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0xe000
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xD0000
+CONFIG_TARGET_ARISTAINETOS2B=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_IMX_HAB=y
+# CONFIG_CMD_DEKBLOB is not set
+# CONFIG_CMD_NANDBCB is not set
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ari_boot"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_TYPES=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_ENCRYPTION=y
+CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb"
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_PINMUX is not set
+# CONFIG_CMD_SATA is not set
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_HASH is not set
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2b_4"
+CONFIG_OF_LIST="imx6dl-aristainetos2b_4 imx6dl-aristainetos2b_7"
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_EARLY=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_OFFSET_REDUND=0xE0000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_IMX_WATCHDOG=y
+# CONFIG_EFI_LOADER is not set
@@ -86,6 +86,28 @@
"enable_hab_check=0\0"
#endif
+#if (CONFIG_SYS_BOARD_VERSION == 3)
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "dead=led led_red on\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
+ "mainboot=echo Booting from SD-card ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0"
+#else
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"dead=led led_red on\0" \
"mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
@@ -106,6 +128,7 @@
"${fit_file}\0" \
"rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
"${fit_addr_r} ${rescue_fit_file}\0"
+#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"disable_giga=yes\0" \
readd aristainetos 2b board. Signed-off-by: Heiko Schocher <hs@denx.de> --- arch/arm/dts/Makefile | 2 + .../dts/imx6dl-aristainetos2b_4-u-boot.dtsi | 13 + arch/arm/dts/imx6dl-aristainetos2b_4.dts | 50 ++++ .../dts/imx6dl-aristainetos2b_7-u-boot.dtsi | 19 ++ arch/arm/dts/imx6dl-aristainetos2b_7.dts | 16 ++ .../dts/imx6qdl-aristainetos2b-u-boot.dtsi | 77 +++++ arch/arm/dts/imx6qdl-aristainetos2b.dtsi | 266 ++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 11 + board/aristainetos/Kconfig | 12 + board/aristainetos/MAINTAINERS | 7 + board/aristainetos/common/Kconfig | 1 + configs/aristainetos2b_defconfig | 115 ++++++++ include/configs/aristainetos2.h | 23 ++ 13 files changed, 612 insertions(+) create mode 100644 arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-aristainetos2b_4.dts create mode 100644 arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi create mode 100644 arch/arm/dts/imx6dl-aristainetos2b_7.dts create mode 100644 arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi create mode 100644 arch/arm/dts/imx6qdl-aristainetos2b.dtsi create mode 100644 configs/aristainetos2b_defconfig