Message ID | 20191105153228.17176-1-manivannan.sadhasivam@linaro.org |
---|---|
State | Superseded |
Delegated to: | Stefano Babic |
Headers | show |
Series | [U-Boot] board: Add support for iMX8QXP AI_ML board | expand |
Hi, On Tue, Nov 05, 2019 at 09:02:28PM +0530, Manivannan Sadhasivam wrote: > This commit adds initial board support for iMX8QXP AI_ML board from > Einfochips. This board is one of the 96Boards Consumer Edition and AI > boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. > > This initial supports contains following peripherals which are tested and > known to work: > > 1. Debug serial via UART2 > 2. SD card > 3. Ethernet > > More information about this board can be found in arrow website: > https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Reviewed-by: Peng Fan <peng.fan@nxp.com> Looks like this patch has fallen through the cracks! Let me know if I have to resend it (again). Thanks, Mani > --- > arch/arm/mach-imx/imx8/Kconfig | 6 ++ > board/einfochips/imx8qxp_ai_ml/Kconfig | 21 ++++ > board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 ++ > board/einfochips/imx8qxp_ai_ml/Makefile | 8 ++ > board/einfochips/imx8qxp_ai_ml/README | 49 ++++++++++ > .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 78 +++++++++++++++ > board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 +++++ > board/einfochips/imx8qxp_ai_ml/spl.c | 39 ++++++++ > configs/imx8qxp_ai_ml_defconfig | 83 ++++++++++++++++ > include/configs/imx8qxp_ai_ml.h | 95 +++++++++++++++++++ > 10 files changed, 409 insertions(+) > create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig > create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS > create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile > create mode 100644 board/einfochips/imx8qxp_ai_ml/README > create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c > create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg > create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c > create mode 100644 configs/imx8qxp_ai_ml_defconfig > create mode 100644 include/configs/imx8qxp_ai_ml.h > > diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig > index cdb78afacf..25fe4e2be0 100644 > --- a/arch/arm/mach-imx/imx8/Kconfig > +++ b/arch/arm/mach-imx/imx8/Kconfig > @@ -55,6 +55,11 @@ config TARGET_COLIBRI_IMX8X > select BOARD_LATE_INIT > select IMX8QXP > > +config TARGET_IMX8QXP_AI_ML > + bool "Support i.MX8QXP AI_ML board" > + select BOARD_EARLY_INIT_F > + select IMX8QXP > + > config TARGET_IMX8QM_MEK > bool "Support i.MX8QM MEK board" > select BOARD_LATE_INIT > @@ -73,6 +78,7 @@ config TARGET_IMX8QXP_MEK > > endchoice > > +source "board/einfochips/imx8qxp_ai_ml/Kconfig" > source "board/freescale/imx8qm_mek/Kconfig" > source "board/freescale/imx8qxp_mek/Kconfig" > source "board/advantech/imx8qm_rom7720_a1/Kconfig" > diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig > new file mode 100644 > index 0000000000..b6806b8859 > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig > @@ -0,0 +1,21 @@ > +if TARGET_IMX8QXP_AI_ML > + > +config SYS_BOARD > + default "imx8qxp_ai_ml" > + > +config SYS_VENDOR > + default "einfochips" > + > +config SYS_CONFIG_NAME > + default "imx8qxp_ai_ml" > + > +config SYS_MALLOC_LEN > + default 0x2400000 > + > +config ENV_SIZE > + default 0x1000 > + > +config ENV_OFFSET > + default 0x400000 > + > +endif > diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS > new file mode 100644 > index 0000000000..add0bd9431 > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS > @@ -0,0 +1,6 @@ > +i.MX8QXP AI_ML BOARD > +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > +S: Maintained > +F: board/einfochips/imx8qxp_ai_ml/ > +F: include/configs/imx8qxp_ai_ml.h > +F: configs/imx8qxp_ai_ml_defconfig > diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile > new file mode 100644 > index 0000000000..e08774dc6e > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/Makefile > @@ -0,0 +1,8 @@ > +# > +# Copyright 2019 Linaro Ltd. > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +obj-y += imx8qxp_ai_ml.o > +obj-$(CONFIG_SPL_BUILD) += spl.o > diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README > new file mode 100644 > index 0000000000..488920580f > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/README > @@ -0,0 +1,49 @@ > +U-Boot for the Einfochips i.MX8QXP AI_ML board > + > +Quick Start > +=========== > + > +- Get and Build the ARM Trusted firmware > +- Get scfw_tcm.bin and ahab-container.img > +- Build U-Boot > +- Flash the binary into the SD card > +- Boot > + > +Get and Build the ARM Trusted firmware > +====================================== > + > +$ git clone https://source.codeaurora.org/external/imx/imx-atf > +$ cd imx-atf/ > +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 > +$ make PLAT=imx8qxp bl31 > + > +Get scfw_tcm.bin and ahab-container.img > +======================================= > + > +$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin > +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin > +$ chmod +x firmware-imx-8.1.bin > +$ ./firmware-imx-8.1.bin > + > +Copy the following binaries to U-Boot folder: > + > +$ cp imx-atf/build/imx8qxp/release/bl31.bin . > +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img . > + > +Build U-Boot > +============ > + > +$ make imx8qxp_ai_ml_defconfig > +$ make u-boot-dtb.imx > + > +Flash the binary into the SD card > +================================= > + > +Burn the u-boot-dtb.imx binary to SD card offset 32KB: > + > +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32 > + > +Boot > +==== > + > +Set Boot switch SW2: 1100. > diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c > new file mode 100644 > index 0000000000..465fea65f8 > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c > @@ -0,0 +1,78 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2018 NXP > + * Copyright 2019 Linaro Ltd. > + */ > + > +#include <common.h> > +#include <errno.h> > +#include <linux/libfdt.h> > +#include <fsl_esdhc.h> > +#include <asm/io.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/sci/sci.h> > +#include <asm/arch/imx8-pins.h> > +#include <asm/arch/iomux.h> > +#include <asm/arch/sys_proto.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +int board_early_init_f(void) > +{ > + sc_pm_clock_rate_t rate = SC_80MHZ; > + int ret; > + > + /* Set UART2 clock root to 80 MHz */ > + ret = sc_pm_setup_uart(SC_R_UART_2, rate); > + if (ret) > + return ret; > + > + return 0; > +} > + > +#if IS_ENABLED(CONFIG_FEC_MXC) > +#include <miiphy.h> > + > +int board_phy_config(struct phy_device *phydev) > +{ > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); > + > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); > + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); > + > + if (phydev->drv->config) > + phydev->drv->config(phydev); > + > + return 0; > +} > +#endif > + > +int checkboard(void) > +{ > + puts("Board: iMX8QXP AI_ML\n"); > + > + build_info(); > + print_bootinfo(); > + > + return 0; > +} > + > +int board_init(void) > +{ > + return 0; > +} > + > +/* Board specific reset that is system reset */ > + > +void reset_cpu(ulong addr) > +{ > + /* TODO */ > +} > + > +#ifdef CONFIG_OF_BOARD_SETUP > +int ft_board_setup(void *blob, bd_t *bd) > +{ > + return 0; > +} > +#endif > diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg > new file mode 100644 > index 0000000000..4fc5ade313 > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg > @@ -0,0 +1,24 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright 2018 NXP > + * > + * Refer doc/README.imx8image for more details about how-to configure > + * and create imx8image boot image > + */ > + > +#define __ASSEMBLY__ > + > +/* Boot from SD, sector size 0x400 */ > +BOOT_FROM SD 0x400 > +/* SoC type IMX8QX */ > +SOC_TYPE IMX8QX > +/* Append seco container image */ > +APPEND mx8qx-ahab-container.img > +/* Create the 2nd container */ > +CONTAINER > +/* Add scfw image with exec attribute */ > +IMAGE SCU mx8qx-aiml-scfw-tcm.bin > +/* Add ATF image with exec attribute */ > +IMAGE A35 bl31.bin 0x80000000 > +/* Add U-Boot image with load attribute */ > +DATA A35 u-boot-dtb.bin 0x80020000 > diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c > new file mode 100644 > index 0000000000..2e6e0741e5 > --- /dev/null > +++ b/board/einfochips/imx8qxp_ai_ml/spl.c > @@ -0,0 +1,39 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2018 NXP > + * Copyright 2019 Linaro Ltd. > + * > + */ > + > +#include <common.h> > +#include <dm.h> > +#include <spl.h> > +#include <dm/uclass.h> > +#include <dm/device.h> > +#include <dm/uclass-internal.h> > +#include <dm/device-internal.h> > +#include <dm/lists.h> > + > +DECLARE_GLOBAL_DATA_PTR; > + > +void spl_board_init(void) > +{ > + arch_cpu_init(); > + > + timer_init(); > + > + preloader_console_init(); > + > + puts("Normal Boot\n"); > +} > + > +void board_init_f(ulong dummy) > +{ > + /* Clear global data */ > + memset((void *)gd, 0, sizeof(gd_t)); > + > + /* Clear the BSS. */ > + memset(__bss_start, 0, __bss_end - __bss_start); > + > + board_init_r(NULL, 0); > +} > diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig > new file mode 100644 > index 0000000000..e20a0c783e > --- /dev/null > +++ b/configs/imx8qxp_ai_ml_defconfig > @@ -0,0 +1,83 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_IMX8=y > +CONFIG_SYS_TEXT_BASE=0x80020000 > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_SPL_GPIO_SUPPORT=y > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > +CONFIG_TARGET_IMX8QXP_AI_ML=y > +CONFIG_SPL_MMC_SUPPORT=y > +CONFIG_SPL_SERIAL_SUPPORT=y > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > +CONFIG_NR_DRAM_BANKS=4 > +CONFIG_SPL=y > +CONFIG_FIT=y > +CONFIG_SPL_LOAD_FIT=y > +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" > +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg" > +CONFIG_BOOTDELAY=3 > +CONFIG_LOG=y > +CONFIG_SPL_BOARD_INIT=y > +CONFIG_SPL_SYS_MALLOC_SIMPLE=y > +CONFIG_SPL_SEPARATE_BSS=y > +CONFIG_SPL_POWER_SUPPORT=y > +CONFIG_SPL_POWER_DOMAIN=y > +CONFIG_SPL_WATCHDOG_SUPPORT=y > +CONFIG_HUSH_PARSER=y > +CONFIG_CMD_CPU=y > +# CONFIG_CMD_IMPORTENV is not set > +CONFIG_CMD_CLK=y > +CONFIG_CMD_DM=y > +CONFIG_CMD_FUSE=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_DHCP=y > +CONFIG_CMD_MII=y > +CONFIG_CMD_PING=y > +CONFIG_CMD_CACHE=y > +CONFIG_CMD_EXT4=y > +CONFIG_CMD_EXT4_WRITE=y > +CONFIG_CMD_FAT=y > +CONFIG_FAT_WRITE=y > +CONFIG_CMD_FS_GENERIC=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_SPL_DM=y > +CONFIG_SPL_CLK=y > +CONFIG_CLK_IMX8=y > +CONFIG_CPU=y > +CONFIG_DM_GPIO=y > +CONFIG_MXC_GPIO=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_IMX_LPI2C=y > +CONFIG_MISC=y > +CONFIG_DM_MMC=y > +CONFIG_FSL_ESDHC=y > +CONFIG_PHYLIB=y > +CONFIG_PHY_ADDR_ENABLE=y > +CONFIG_PHY_ATHEROS=y > +CONFIG_DM_ETH=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_PHY_GIGE=y > +CONFIG_FEC_MXC_SHARE_MDIO=y > +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 > +CONFIG_FEC_MXC=y > +CONFIG_MII=y > +CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PINCTRL_IMX8=y > +CONFIG_POWER_DOMAIN=y > +CONFIG_IMX8_POWER_DOMAIN=y > +CONFIG_DM_REGULATOR=y > +CONFIG_SPL_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_GPIO=y > +CONFIG_SPL_DM_REGULATOR_GPIO=y > +CONFIG_DM_SERIAL=y > +CONFIG_FSL_LPUART=y > +CONFIG_SPL_TINY_MEMSET=y > +# CONFIG_EFI_LOADER is not set > diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h > new file mode 100644 > index 0000000000..bdac710103 > --- /dev/null > +++ b/include/configs/imx8qxp_ai_ml.h > @@ -0,0 +1,95 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright 2018 NXP > + * Copyright 2019 Linaro Ltd. > + */ > + > +#ifndef __IMX8QXP_AI_ML_H > +#define __IMX8QXP_AI_ML_H > + > +#include <linux/sizes.h> > +#include <asm/arch/imx-regs.h> > + > +#ifdef CONFIG_SPL_BUILD > +#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) > +#define CONFIG_SYS_MONITOR_LEN (SZ_1K * SZ_1K) > +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR > +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250 > +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 > + > +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" > +#define CONFIG_SPL_STACK 0x013E000 > +#define CONFIG_SPL_BSS_START_ADDR 0x00128000 > +#define CONFIG_SPL_BSS_MAX_SIZE SZ_4K /* 4 KB */ > +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 > +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ > +#define CONFIG_SERIAL_LPUART_BASE 0x5a080000 > +#define CONFIG_MALLOC_F_ADDR 0x00120000 > + > +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE > + > +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE > + > +#define CONFIG_OF_SEPARATE > +#endif > + > +#define CONFIG_REMAKE_ELF > + > +/* Flat Device Tree Definitions */ > +#define CONFIG_OF_BOARD_SETUP > + > +#define CONFIG_FSL_USDHC > + > +#define CONFIG_ENV_OVERWRITE > + > +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > + > +#define BOOT_TARGET_DEVICES(func) \ > + func(MMC, mmc, 1) \ > + func(DHCP, dhcp, na) > + > +#include <config_distro_bootcmd.h> > +/* Initial environment variables */ > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + "console=ttyLP2 earlycon\0" \ > + "fdt_addr_r=0x83000000\0" \ > + "kernel_addr_r=0x81000000\0" \ > + "ramdisk_addr_r=0x94400000\0" \ > + "scriptaddr=0x89000000\0" \ > + "fdtfile=imx8qxp-ai_ml.dtb\0" \ > + "fdt_high=0xffffffffffffffff\0" \ > + "image=Image\0" \ > + "initrd_addr=0x83800000\0" \ > + "initrd_high=0xffffffffffffffff\0" \ > + "netargs=setenv bootargs console=${console},${baudrate} " \ > + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ > + "\0" \ > + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ > + "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \ > + BOOTENV > + > +/* Link Definitions */ > +#define CONFIG_LOADADDR 0x80280000 > + > +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR > + > +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 > + > +/* USDHC2 is the SD card interface */ > +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ > +#define CONFIG_SYS_FSL_USDHC_NUM 2 > + > +#define CONFIG_SYS_SDRAM_BASE 0x80000000 > +#define PHYS_SDRAM_1 0x80000000 > +#define PHYS_SDRAM_2 0x880000000 > +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ > +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ > + > +/* Generic Timer Definitions */ > +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ > + > +/* Networking */ > +#define CONFIG_FEC_XCV_TYPE RGMII > +#define FEC_QUIRK_ENET_MAC > + > +#endif /* __IMX8QXP_AI_ML_H */ > -- > 2.17.1 >
Hi Manivannan, On Fri, Jul 10, 2020 at 11:00 AM Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote: > > Hi, > > On Tue, Nov 05, 2019 at 09:02:28PM +0530, Manivannan Sadhasivam wrote: > > This commit adds initial board support for iMX8QXP AI_ML board from > > Einfochips. This board is one of the 96Boards Consumer Edition and AI > > boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. > > > > This initial supports contains following peripherals which are tested and > > known to work: > > > > 1. Debug serial via UART2 > > 2. SD card > > 3. Ethernet > > > > More information about this board can be found in arrow website: > > https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Reviewed-by: Peng Fan <peng.fan@nxp.com> > > Looks like this patch has fallen through the cracks! Let me know if I have > to resend it (again). Sorry for the delay. Your patch looks great: Reviewed-by: Fabio Estevam <festevam@gmail.com>
Hi Mani, On 10.07.20 15:59, Manivannan Sadhasivam wrote: > Hi, > > On Tue, Nov 05, 2019 at 09:02:28PM +0530, Manivannan Sadhasivam wrote: >> This commit adds initial board support for iMX8QXP AI_ML board from >> Einfochips. This board is one of the 96Boards Consumer Edition and AI >> boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. >> >> This initial supports contains following peripherals which are tested and >> known to work: >> >> 1. Debug serial via UART2 >> 2. SD card >> 3. Ethernet >> >> More information about this board can be found in arrow website: >> https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools >> >> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> >> Reviewed-by: Peng Fan <peng.fan@nxp.com> > > Looks like this patch has fallen through the cracks! Let me know if I have > to resend it (again). > Your board cannot be built clean - can you rebase and repost ? Thanks ! You can check the reason here: https://travis-ci.org/github/sbabic/u-boot-imx/jobs/712217118 Best regards, Stefano > Thanks, > Mani > >> --- >> arch/arm/mach-imx/imx8/Kconfig | 6 ++ >> board/einfochips/imx8qxp_ai_ml/Kconfig | 21 ++++ >> board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 ++ >> board/einfochips/imx8qxp_ai_ml/Makefile | 8 ++ >> board/einfochips/imx8qxp_ai_ml/README | 49 ++++++++++ >> .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 78 +++++++++++++++ >> board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 +++++ >> board/einfochips/imx8qxp_ai_ml/spl.c | 39 ++++++++ >> configs/imx8qxp_ai_ml_defconfig | 83 ++++++++++++++++ >> include/configs/imx8qxp_ai_ml.h | 95 +++++++++++++++++++ >> 10 files changed, 409 insertions(+) >> create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig >> create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS >> create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile >> create mode 100644 board/einfochips/imx8qxp_ai_ml/README >> create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c >> create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg >> create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c >> create mode 100644 configs/imx8qxp_ai_ml_defconfig >> create mode 100644 include/configs/imx8qxp_ai_ml.h >> >> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig >> index cdb78afacf..25fe4e2be0 100644 >> --- a/arch/arm/mach-imx/imx8/Kconfig >> +++ b/arch/arm/mach-imx/imx8/Kconfig >> @@ -55,6 +55,11 @@ config TARGET_COLIBRI_IMX8X >> select BOARD_LATE_INIT >> select IMX8QXP >> >> +config TARGET_IMX8QXP_AI_ML >> + bool "Support i.MX8QXP AI_ML board" >> + select BOARD_EARLY_INIT_F >> + select IMX8QXP >> + >> config TARGET_IMX8QM_MEK >> bool "Support i.MX8QM MEK board" >> select BOARD_LATE_INIT >> @@ -73,6 +78,7 @@ config TARGET_IMX8QXP_MEK >> >> endchoice >> >> +source "board/einfochips/imx8qxp_ai_ml/Kconfig" >> source "board/freescale/imx8qm_mek/Kconfig" >> source "board/freescale/imx8qxp_mek/Kconfig" >> source "board/advantech/imx8qm_rom7720_a1/Kconfig" >> diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig >> new file mode 100644 >> index 0000000000..b6806b8859 >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig >> @@ -0,0 +1,21 @@ >> +if TARGET_IMX8QXP_AI_ML >> + >> +config SYS_BOARD >> + default "imx8qxp_ai_ml" >> + >> +config SYS_VENDOR >> + default "einfochips" >> + >> +config SYS_CONFIG_NAME >> + default "imx8qxp_ai_ml" >> + >> +config SYS_MALLOC_LEN >> + default 0x2400000 >> + >> +config ENV_SIZE >> + default 0x1000 >> + >> +config ENV_OFFSET >> + default 0x400000 >> + >> +endif >> diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS >> new file mode 100644 >> index 0000000000..add0bd9431 >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS >> @@ -0,0 +1,6 @@ >> +i.MX8QXP AI_ML BOARD >> +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> >> +S: Maintained >> +F: board/einfochips/imx8qxp_ai_ml/ >> +F: include/configs/imx8qxp_ai_ml.h >> +F: configs/imx8qxp_ai_ml_defconfig >> diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile >> new file mode 100644 >> index 0000000000..e08774dc6e >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/Makefile >> @@ -0,0 +1,8 @@ >> +# >> +# Copyright 2019 Linaro Ltd. >> +# >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> + >> +obj-y += imx8qxp_ai_ml.o >> +obj-$(CONFIG_SPL_BUILD) += spl.o >> diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README >> new file mode 100644 >> index 0000000000..488920580f >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/README >> @@ -0,0 +1,49 @@ >> +U-Boot for the Einfochips i.MX8QXP AI_ML board >> + >> +Quick Start >> +=========== >> + >> +- Get and Build the ARM Trusted firmware >> +- Get scfw_tcm.bin and ahab-container.img >> +- Build U-Boot >> +- Flash the binary into the SD card >> +- Boot >> + >> +Get and Build the ARM Trusted firmware >> +====================================== >> + >> +$ git clone https://source.codeaurora.org/external/imx/imx-atf >> +$ cd imx-atf/ >> +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 >> +$ make PLAT=imx8qxp bl31 >> + >> +Get scfw_tcm.bin and ahab-container.img >> +======================================= >> + >> +$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin >> +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin >> +$ chmod +x firmware-imx-8.1.bin >> +$ ./firmware-imx-8.1.bin >> + >> +Copy the following binaries to U-Boot folder: >> + >> +$ cp imx-atf/build/imx8qxp/release/bl31.bin . >> +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img . >> + >> +Build U-Boot >> +============ >> + >> +$ make imx8qxp_ai_ml_defconfig >> +$ make u-boot-dtb.imx >> + >> +Flash the binary into the SD card >> +================================= >> + >> +Burn the u-boot-dtb.imx binary to SD card offset 32KB: >> + >> +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32 >> + >> +Boot >> +==== >> + >> +Set Boot switch SW2: 1100. >> diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c >> new file mode 100644 >> index 0000000000..465fea65f8 >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c >> @@ -0,0 +1,78 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright 2018 NXP >> + * Copyright 2019 Linaro Ltd. >> + */ >> + >> +#include <common.h> >> +#include <errno.h> >> +#include <linux/libfdt.h> >> +#include <fsl_esdhc.h> >> +#include <asm/io.h> >> +#include <asm/arch/clock.h> >> +#include <asm/arch/sci/sci.h> >> +#include <asm/arch/imx8-pins.h> >> +#include <asm/arch/iomux.h> >> +#include <asm/arch/sys_proto.h> >> + >> +DECLARE_GLOBAL_DATA_PTR; >> + >> +int board_early_init_f(void) >> +{ >> + sc_pm_clock_rate_t rate = SC_80MHZ; >> + int ret; >> + >> + /* Set UART2 clock root to 80 MHz */ >> + ret = sc_pm_setup_uart(SC_R_UART_2, rate); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +#if IS_ENABLED(CONFIG_FEC_MXC) >> +#include <miiphy.h> >> + >> +int board_phy_config(struct phy_device *phydev) >> +{ >> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); >> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); >> + >> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); >> + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); >> + >> + if (phydev->drv->config) >> + phydev->drv->config(phydev); >> + >> + return 0; >> +} >> +#endif >> + >> +int checkboard(void) >> +{ >> + puts("Board: iMX8QXP AI_ML\n"); >> + >> + build_info(); >> + print_bootinfo(); >> + >> + return 0; >> +} >> + >> +int board_init(void) >> +{ >> + return 0; >> +} >> + >> +/* Board specific reset that is system reset */ >> + >> +void reset_cpu(ulong addr) >> +{ >> + /* TODO */ >> +} >> + >> +#ifdef CONFIG_OF_BOARD_SETUP >> +int ft_board_setup(void *blob, bd_t *bd) >> +{ >> + return 0; >> +} >> +#endif >> diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg >> new file mode 100644 >> index 0000000000..4fc5ade313 >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg >> @@ -0,0 +1,24 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright 2018 NXP >> + * >> + * Refer doc/README.imx8image for more details about how-to configure >> + * and create imx8image boot image >> + */ >> + >> +#define __ASSEMBLY__ >> + >> +/* Boot from SD, sector size 0x400 */ >> +BOOT_FROM SD 0x400 >> +/* SoC type IMX8QX */ >> +SOC_TYPE IMX8QX >> +/* Append seco container image */ >> +APPEND mx8qx-ahab-container.img >> +/* Create the 2nd container */ >> +CONTAINER >> +/* Add scfw image with exec attribute */ >> +IMAGE SCU mx8qx-aiml-scfw-tcm.bin >> +/* Add ATF image with exec attribute */ >> +IMAGE A35 bl31.bin 0x80000000 >> +/* Add U-Boot image with load attribute */ >> +DATA A35 u-boot-dtb.bin 0x80020000 >> diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c >> new file mode 100644 >> index 0000000000..2e6e0741e5 >> --- /dev/null >> +++ b/board/einfochips/imx8qxp_ai_ml/spl.c >> @@ -0,0 +1,39 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright 2018 NXP >> + * Copyright 2019 Linaro Ltd. >> + * >> + */ >> + >> +#include <common.h> >> +#include <dm.h> >> +#include <spl.h> >> +#include <dm/uclass.h> >> +#include <dm/device.h> >> +#include <dm/uclass-internal.h> >> +#include <dm/device-internal.h> >> +#include <dm/lists.h> >> + >> +DECLARE_GLOBAL_DATA_PTR; >> + >> +void spl_board_init(void) >> +{ >> + arch_cpu_init(); >> + >> + timer_init(); >> + >> + preloader_console_init(); >> + >> + puts("Normal Boot\n"); >> +} >> + >> +void board_init_f(ulong dummy) >> +{ >> + /* Clear global data */ >> + memset((void *)gd, 0, sizeof(gd_t)); >> + >> + /* Clear the BSS. */ >> + memset(__bss_start, 0, __bss_end - __bss_start); >> + >> + board_init_r(NULL, 0); >> +} >> diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig >> new file mode 100644 >> index 0000000000..e20a0c783e >> --- /dev/null >> +++ b/configs/imx8qxp_ai_ml_defconfig >> @@ -0,0 +1,83 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_IMX8=y >> +CONFIG_SYS_TEXT_BASE=0x80020000 >> +CONFIG_DISTRO_DEFAULTS=y >> +CONFIG_SPL_GPIO_SUPPORT=y >> +CONFIG_SPL_LIBCOMMON_SUPPORT=y >> +CONFIG_SPL_LIBGENERIC_SUPPORT=y >> +CONFIG_SYS_MALLOC_F_LEN=0x4000 >> +CONFIG_TARGET_IMX8QXP_AI_ML=y >> +CONFIG_SPL_MMC_SUPPORT=y >> +CONFIG_SPL_SERIAL_SUPPORT=y >> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y >> +CONFIG_NR_DRAM_BANKS=4 >> +CONFIG_SPL=y >> +CONFIG_FIT=y >> +CONFIG_SPL_LOAD_FIT=y >> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" >> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg" >> +CONFIG_BOOTDELAY=3 >> +CONFIG_LOG=y >> +CONFIG_SPL_BOARD_INIT=y >> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y >> +CONFIG_SPL_SEPARATE_BSS=y >> +CONFIG_SPL_POWER_SUPPORT=y >> +CONFIG_SPL_POWER_DOMAIN=y >> +CONFIG_SPL_WATCHDOG_SUPPORT=y >> +CONFIG_HUSH_PARSER=y >> +CONFIG_CMD_CPU=y >> +# CONFIG_CMD_IMPORTENV is not set >> +CONFIG_CMD_CLK=y >> +CONFIG_CMD_DM=y >> +CONFIG_CMD_FUSE=y >> +CONFIG_CMD_GPIO=y >> +CONFIG_CMD_GPT=y >> +CONFIG_CMD_I2C=y >> +CONFIG_CMD_MMC=y >> +CONFIG_CMD_DHCP=y >> +CONFIG_CMD_MII=y >> +CONFIG_CMD_PING=y >> +CONFIG_CMD_CACHE=y >> +CONFIG_CMD_EXT4=y >> +CONFIG_CMD_EXT4_WRITE=y >> +CONFIG_CMD_FAT=y >> +CONFIG_FAT_WRITE=y >> +CONFIG_CMD_FS_GENERIC=y >> +CONFIG_SPL_OF_CONTROL=y >> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml" >> +CONFIG_ENV_IS_IN_MMC=y >> +CONFIG_SPL_DM=y >> +CONFIG_SPL_CLK=y >> +CONFIG_CLK_IMX8=y >> +CONFIG_CPU=y >> +CONFIG_DM_GPIO=y >> +CONFIG_MXC_GPIO=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_IMX_LPI2C=y >> +CONFIG_MISC=y >> +CONFIG_DM_MMC=y >> +CONFIG_FSL_ESDHC=y >> +CONFIG_PHYLIB=y >> +CONFIG_PHY_ADDR_ENABLE=y >> +CONFIG_PHY_ATHEROS=y >> +CONFIG_DM_ETH=y >> +CONFIG_NET_RANDOM_ETHADDR=y >> +CONFIG_PHY_GIGE=y >> +CONFIG_FEC_MXC_SHARE_MDIO=y >> +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 >> +CONFIG_FEC_MXC=y >> +CONFIG_MII=y >> +CONFIG_PINCTRL=y >> +CONFIG_SPL_PINCTRL=y >> +CONFIG_PINCTRL_IMX8=y >> +CONFIG_POWER_DOMAIN=y >> +CONFIG_IMX8_POWER_DOMAIN=y >> +CONFIG_DM_REGULATOR=y >> +CONFIG_SPL_DM_REGULATOR=y >> +CONFIG_DM_REGULATOR_FIXED=y >> +CONFIG_DM_REGULATOR_GPIO=y >> +CONFIG_SPL_DM_REGULATOR_GPIO=y >> +CONFIG_DM_SERIAL=y >> +CONFIG_FSL_LPUART=y >> +CONFIG_SPL_TINY_MEMSET=y >> +# CONFIG_EFI_LOADER is not set >> diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h >> new file mode 100644 >> index 0000000000..bdac710103 >> --- /dev/null >> +++ b/include/configs/imx8qxp_ai_ml.h >> @@ -0,0 +1,95 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright 2018 NXP >> + * Copyright 2019 Linaro Ltd. >> + */ >> + >> +#ifndef __IMX8QXP_AI_ML_H >> +#define __IMX8QXP_AI_ML_H >> + >> +#include <linux/sizes.h> >> +#include <asm/arch/imx-regs.h> >> + >> +#ifdef CONFIG_SPL_BUILD >> +#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) >> +#define CONFIG_SYS_MONITOR_LEN (SZ_1K * SZ_1K) >> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR >> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250 >> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 >> + >> +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" >> +#define CONFIG_SPL_STACK 0x013E000 >> +#define CONFIG_SPL_BSS_START_ADDR 0x00128000 >> +#define CONFIG_SPL_BSS_MAX_SIZE SZ_4K /* 4 KB */ >> +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 >> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ >> +#define CONFIG_SERIAL_LPUART_BASE 0x5a080000 >> +#define CONFIG_MALLOC_F_ADDR 0x00120000 >> + >> +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE >> + >> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE >> + >> +#define CONFIG_OF_SEPARATE >> +#endif >> + >> +#define CONFIG_REMAKE_ELF >> + >> +/* Flat Device Tree Definitions */ >> +#define CONFIG_OF_BOARD_SETUP >> + >> +#define CONFIG_FSL_USDHC >> + >> +#define CONFIG_ENV_OVERWRITE >> + >> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG >> + >> +#define BOOT_TARGET_DEVICES(func) \ >> + func(MMC, mmc, 1) \ >> + func(DHCP, dhcp, na) >> + >> +#include <config_distro_bootcmd.h> >> +/* Initial environment variables */ >> +#define CONFIG_EXTRA_ENV_SETTINGS \ >> + "console=ttyLP2 earlycon\0" \ >> + "fdt_addr_r=0x83000000\0" \ >> + "kernel_addr_r=0x81000000\0" \ >> + "ramdisk_addr_r=0x94400000\0" \ >> + "scriptaddr=0x89000000\0" \ >> + "fdtfile=imx8qxp-ai_ml.dtb\0" \ >> + "fdt_high=0xffffffffffffffff\0" \ >> + "image=Image\0" \ >> + "initrd_addr=0x83800000\0" \ >> + "initrd_high=0xffffffffffffffff\0" \ >> + "netargs=setenv bootargs console=${console},${baudrate} " \ >> + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ >> + "\0" \ >> + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ >> + "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \ >> + BOOTENV >> + >> +/* Link Definitions */ >> +#define CONFIG_LOADADDR 0x80280000 >> + >> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR >> + >> +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 >> + >> +/* USDHC2 is the SD card interface */ >> +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ >> +#define CONFIG_SYS_FSL_USDHC_NUM 2 >> + >> +#define CONFIG_SYS_SDRAM_BASE 0x80000000 >> +#define PHYS_SDRAM_1 0x80000000 >> +#define PHYS_SDRAM_2 0x880000000 >> +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ >> +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ >> + >> +/* Generic Timer Definitions */ >> +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ >> + >> +/* Networking */ >> +#define CONFIG_FEC_XCV_TYPE RGMII >> +#define FEC_QUIRK_ENET_MAC >> + >> +#endif /* __IMX8QXP_AI_ML_H */ >> -- >> 2.17.1 >>
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index cdb78afacf..25fe4e2be0 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -55,6 +55,11 @@ config TARGET_COLIBRI_IMX8X select BOARD_LATE_INIT select IMX8QXP +config TARGET_IMX8QXP_AI_ML + bool "Support i.MX8QXP AI_ML board" + select BOARD_EARLY_INIT_F + select IMX8QXP + config TARGET_IMX8QM_MEK bool "Support i.MX8QM MEK board" select BOARD_LATE_INIT @@ -73,6 +78,7 @@ config TARGET_IMX8QXP_MEK endchoice +source "board/einfochips/imx8qxp_ai_ml/Kconfig" source "board/freescale/imx8qm_mek/Kconfig" source "board/freescale/imx8qxp_mek/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig new file mode 100644 index 0000000000..b6806b8859 --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig @@ -0,0 +1,21 @@ +if TARGET_IMX8QXP_AI_ML + +config SYS_BOARD + default "imx8qxp_ai_ml" + +config SYS_VENDOR + default "einfochips" + +config SYS_CONFIG_NAME + default "imx8qxp_ai_ml" + +config SYS_MALLOC_LEN + default 0x2400000 + +config ENV_SIZE + default 0x1000 + +config ENV_OFFSET + default 0x400000 + +endif diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS new file mode 100644 index 0000000000..add0bd9431 --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS @@ -0,0 +1,6 @@ +i.MX8QXP AI_ML BOARD +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> +S: Maintained +F: board/einfochips/imx8qxp_ai_ml/ +F: include/configs/imx8qxp_ai_ml.h +F: configs/imx8qxp_ai_ml_defconfig diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile new file mode 100644 index 0000000000..e08774dc6e --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2019 Linaro Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8qxp_ai_ml.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README new file mode 100644 index 0000000000..488920580f --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/README @@ -0,0 +1,49 @@ +U-Boot for the Einfochips i.MX8QXP AI_ML board + +Quick Start +=========== + +- Get and Build the ARM Trusted firmware +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Flash the binary into the SD card +- Boot + +Get and Build the ARM Trusted firmware +====================================== + +$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ cd imx-atf/ +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 +$ make PLAT=imx8qxp bl31 + +Get scfw_tcm.bin and ahab-container.img +======================================= + +$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin +$ chmod +x firmware-imx-8.1.bin +$ ./firmware-imx-8.1.bin + +Copy the following binaries to U-Boot folder: + +$ cp imx-atf/build/imx8qxp/release/bl31.bin . +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img . + +Build U-Boot +============ + +$ make imx8qxp_ai_ml_defconfig +$ make u-boot-dtb.imx + +Flash the binary into the SD card +================================= + +Burn the u-boot-dtb.imx binary to SD card offset 32KB: + +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32 + +Boot +==== + +Set Boot switch SW2: 1100. diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c new file mode 100644 index 0000000000..465fea65f8 --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright 2019 Linaro Ltd. + */ + +#include <common.h> +#include <errno.h> +#include <linux/libfdt.h> +#include <fsl_esdhc.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + sc_pm_clock_rate_t rate = SC_80MHZ; + int ret; + + /* Set UART2 clock root to 80 MHz */ + ret = sc_pm_setup_uart(SC_R_UART_2, rate); + if (ret) + return ret; + + return 0; +} + +#if IS_ENABLED(CONFIG_FEC_MXC) +#include <miiphy.h> + +int board_phy_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + +int checkboard(void) +{ + puts("Board: iMX8QXP AI_ML\n"); + + build_info(); + print_bootinfo(); + + return 0; +} + +int board_init(void) +{ + return 0; +} + +/* Board specific reset that is system reset */ + +void reset_cpu(ulong addr) +{ + /* TODO */ +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + return 0; +} +#endif diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg new file mode 100644 index 0000000000..4fc5ade313 --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + * + * Refer doc/README.imx8image for more details about how-to configure + * and create imx8image boot image + */ + +#define __ASSEMBLY__ + +/* Boot from SD, sector size 0x400 */ +BOOT_FROM SD 0x400 +/* SoC type IMX8QX */ +SOC_TYPE IMX8QX +/* Append seco container image */ +APPEND mx8qx-ahab-container.img +/* Create the 2nd container */ +CONTAINER +/* Add scfw image with exec attribute */ +IMAGE SCU mx8qx-aiml-scfw-tcm.bin +/* Add ATF image with exec attribute */ +IMAGE A35 bl31.bin 0x80000000 +/* Add U-Boot image with load attribute */ +DATA A35 u-boot-dtb.bin 0x80020000 diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c new file mode 100644 index 0000000000..2e6e0741e5 --- /dev/null +++ b/board/einfochips/imx8qxp_ai_ml/spl.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * Copyright 2019 Linaro Ltd. + * + */ + +#include <common.h> +#include <dm.h> +#include <spl.h> +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> +#include <dm/lists.h> + +DECLARE_GLOBAL_DATA_PTR; + +void spl_board_init(void) +{ + arch_cpu_init(); + + timer_init(); + + preloader_console_init(); + + puts("Normal Boot\n"); +} + +void board_init_f(ulong dummy) +{ + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + board_init_r(NULL, 0); +} diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig new file mode 100644 index 0000000000..e20a0c783e --- /dev/null +++ b/configs/imx8qxp_ai_ml_defconfig @@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_TARGET_IMX8QXP_AI_ML=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=4 +CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_LOG=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CPU=y +# CONFIG_CMD_IMPORTENV is not set +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_FAT_WRITE=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SPL_DM=y +CONFIG_SPL_CLK=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_DM_GPIO=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC_SHARE_MDIO=y +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_SPL_TINY_MEMSET=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h new file mode 100644 index 0000000000..bdac710103 --- /dev/null +++ b/include/configs/imx8qxp_ai_ml.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + * Copyright 2019 Linaro Ltd. + */ + +#ifndef __IMX8QXP_AI_ML_H +#define __IMX8QXP_AI_ML_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) +#define CONFIG_SYS_MONITOR_LEN (SZ_1K * SZ_1K) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x013E000 +#define CONFIG_SPL_BSS_START_ADDR 0x00128000 +#define CONFIG_SPL_BSS_MAX_SIZE SZ_4K /* 4 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ +#define CONFIG_SERIAL_LPUART_BASE 0x5a080000 +#define CONFIG_MALLOC_F_ADDR 0x00120000 + +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#define CONFIG_OF_SEPARATE +#endif + +#define CONFIG_REMAKE_ELF + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_BOARD_SETUP + +#define CONFIG_FSL_USDHC + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttyLP2 earlycon\0" \ + "fdt_addr_r=0x83000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "ramdisk_addr_r=0x94400000\0" \ + "scriptaddr=0x89000000\0" \ + "fdtfile=imx8qxp-ai_ml.dtb\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "image=Image\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ + "\0" \ + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \ + "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \ + BOOTENV + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80280000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +/* USDHC2 is the SD card interface */ +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +/* Networking */ +#define CONFIG_FEC_XCV_TYPE RGMII +#define FEC_QUIRK_ENET_MAC + +#endif /* __IMX8QXP_AI_ML_H */