diff mbox series

[U-Boot,5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support

Message ID 20190710080613.24025-5-peng.fan@nxp.com
State Superseded
Delegated to: Peng Fan
Headers show
Series [U-Boot,1/7] mmc: support hs400 enhanced strobe mode | expand

Commit Message

Peng Fan July 10, 2019, 7:51 a.m. UTC 
Implement set_enhanced_strobe hook for fsl_esdhc_imx,
,in esdhc_set_timing and esdhc_change_pinstate, also handle HS400_ES.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/mmc/fsl_esdhc_imx.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 32d34ccf7c..c496780f2c 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -703,6 +703,7 @@  static int esdhc_change_pinstate(struct udevice *dev)
 	case UHS_SDR104:
 	case MMC_HS_200:
 	case MMC_HS_400:
+	case MMC_HS_400_ES:
 		ret = pinctrl_select_state(dev, "state_200mhz");
 		break;
 	default:
@@ -773,6 +774,7 @@  static int esdhc_set_timing(struct mmc *mmc)
 		writel(mixctrl, &regs->mixctrl);
 		break;
 	case MMC_HS_400:
+	case MMC_HS_400_ES:
 		mixctrl |= MIX_CTRL_DDREN | MIX_CTRL_HS400_EN;
 		writel(mixctrl, &regs->mixctrl);
 		esdhc_set_strobe_dll(mmc);
@@ -1594,6 +1596,19 @@  static int fsl_esdhc_set_ios(struct udevice *dev)
 	return esdhc_set_ios_common(priv, &plat->mmc);
 }
 
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+static void fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
+{
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+	u32 m;
+
+	m = readl(&regs->mixctrl);
+	m |= MIX_CTRL_HS400_ES;
+	writel(m, &regs->mixctrl);
+}
+#endif
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -1601,6 +1616,9 @@  static const struct dm_mmc_ops fsl_esdhc_ops = {
 #ifdef MMC_SUPPORTS_TUNING
 	.execute_tuning	= fsl_esdhc_execute_tuning,
 #endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+	.set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
+#endif
 };
 #endif