@@ -49,6 +49,80 @@
<1 10 0x8>; /* Hypervisor PPI, active-low */
};
+ i2c0: i2c@2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 4>;
+ scl-gpio = <&gpio2 15 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2010000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2020000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@2030000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@2040000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2040000 0x0 0x10000>;
+ interrupts = <0 74 4>;
+ scl-gpio = <&gpio2 16 0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@2050000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2050000 0x0 0x10000>;
+ interrupts = <0 74 4>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@2060000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2060000 0x0 0x10000>;
+ interrupts = <0 75 4>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@2070000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2070000 0x0 0x10000>;
+ interrupts = <0 75 4>;
+ status = "disabled";
+ };
+
uart0: serial@21c0000 {
compatible = "arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
@@ -102,6 +176,17 @@
num-cs = <6>;
};
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 4>;
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
usb0: usb3@3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
In lx2160a soc, there are eight i2c controllers, this patch adds i2c nodes for lx2160a, and the gpio2 nodes on which the i2c4 controller depends. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> --- Changes in v3: - No change. Changes in v2: - Delete unnecessary clockgen related attributes in the i2c controller node arch/arm/dts/fsl-lx2160a.dtsi | 85 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 85 insertions(+), 0 deletions(-)