@@ -581,6 +581,12 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
return 0;
}
+static void dwc3_gadget_run(struct dwc3 *dwc)
+{
+ dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_RUN_STOP);
+ mdelay(100);
+}
+
static void dwc3_core_exit_mode(struct dwc3 *dwc)
{
switch (dwc->dr_mode) {
@@ -598,6 +604,13 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
/* do nothing */
break;
}
+
+ /*
+ * switch back to peripheral mode
+ * This enables the phy to enter idle and then, if enabled, suspend.
+ */
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_gadget_run(dwc);
}
#define DWC3_ALIGN_MASK (16 - 1)
This allow the phy to enter idle and then suspend. the K2 platforms require the PHY to be suspended before the USB domain clock can be turned off. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> --- Changes in v3: None Changes in v2: None drivers/usb/dwc3/core.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)