@@ -888,6 +888,71 @@ int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys)
#endif
#if CONFIG_IS_ENABLED(DM_USB)
+void dwc3_of_parse(struct dwc3 *dwc)
+{
+ const u8 *tmp;
+ struct udevice *dev = dwc->dev;
+ u8 lpm_nyet_threshold;
+ u8 tx_de_emphasis;
+ u8 hird_threshold;
+
+ /* default to highest possible threshold */
+ lpm_nyet_threshold = 0xff;
+
+ /* default to -3.5dB de-emphasis */
+ tx_de_emphasis = 1;
+
+ /*
+ * default to assert utmi_sleep_n and use maximum allowed HIRD
+ * threshold value of 0b1100
+ */
+ hird_threshold = 12;
+
+ dwc->has_lpm_erratum = dev_read_bool(dev,
+ "snps,has-lpm-erratum");
+ tmp = dev_read_u8_array_ptr(dev, "snps,lpm-nyet-threshold", 1);
+ if (tmp)
+ lpm_nyet_threshold = *tmp;
+
+ dwc->is_utmi_l1_suspend = dev_read_bool(dev,
+ "snps,is-utmi-l1-suspend");
+ tmp = dev_read_u8_array_ptr(dev, "snps,hird-threshold", 1);
+ if (tmp)
+ hird_threshold = *tmp;
+
+ dwc->disable_scramble_quirk = dev_read_bool(dev,
+ "snps,disable_scramble_quirk");
+ dwc->u2exit_lfps_quirk = dev_read_bool(dev,
+ "snps,u2exit_lfps_quirk");
+ dwc->u2ss_inp3_quirk = dev_read_bool(dev,
+ "snps,u2ss_inp3_quirk");
+ dwc->req_p1p2p3_quirk = dev_read_bool(dev,
+ "snps,req_p1p2p3_quirk");
+ dwc->del_p1p2p3_quirk = dev_read_bool(dev,
+ "snps,del_p1p2p3_quirk");
+ dwc->del_phy_power_chg_quirk = dev_read_bool(dev,
+ "snps,del_phy_power_chg_quirk");
+ dwc->lfps_filter_quirk = dev_read_bool(dev,
+ "snps,lfps_filter_quirk");
+ dwc->rx_detect_poll_quirk = dev_read_bool(dev,
+ "snps,rx_detect_poll_quirk");
+ dwc->dis_u3_susphy_quirk = dev_read_bool(dev,
+ "snps,dis_u3_susphy_quirk");
+ dwc->dis_u2_susphy_quirk = dev_read_bool(dev,
+ "snps,dis_u2_susphy_quirk");
+ dwc->tx_de_emphasis_quirk = dev_read_bool(dev,
+ "snps,tx_de_emphasis_quirk");
+ tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1);
+ if (tmp)
+ tx_de_emphasis = *tmp;
+
+ dwc->lpm_nyet_threshold = lpm_nyet_threshold;
+ dwc->tx_de_emphasis = tx_de_emphasis;
+
+ dwc->hird_threshold = hird_threshold
+ | (dwc->is_utmi_l1_suspend << 4);
+}
+
int dwc3_init(struct dwc3 *dwc)
{
int ret;
@@ -991,6 +991,7 @@ struct dwc3_gadget_ep_cmd_params {
/* prototypes */
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+void dwc3_of_parse(struct dwc3 *dwc);
int dwc3_init(struct dwc3 *dwc);
void dwc3_remove(struct dwc3 *dwc);
@@ -48,8 +48,12 @@ static int dwc3_generic_probe(struct udevice *dev,
struct dwc3_generic_plat *plat = dev_get_platdata(dev);
struct dwc3 *dwc3 = &priv->dwc3;
+ dwc3->dev = dev;
dwc3->maximum_speed = plat->maximum_speed;
dwc3->dr_mode = plat->dr_mode;
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ dwc3_of_parse(dwc3);
+#endif
rc = dwc3_setup_phy(dev, &priv->phys, &priv->num_phys);
if (rc)
@@ -57,7 +61,7 @@ static int dwc3_generic_probe(struct udevice *dev,
priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START;
- dwc3->dev = dev;
+
rc = dwc3_init(dwc3);
if (rc) {
Add a new function that read quirk and configuration information from the DT. The goal is to allow platforms using their own version of DWC3 driver to migrate to the generic DWC3 driver. The function is adapted from the function dwc3_get_properties() in the linux dwc3 driver introduced in commit c5ac6116db35d. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> --- Changes in v3: None Changes in v2: Update commit log drivers/usb/dwc3/core.c | 65 +++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/dwc3-generic.c | 6 ++- 3 files changed, 71 insertions(+), 1 deletion(-)