diff mbox series

[U-Boot,13/14] configs: j721e_evm_r5: Add initial support

Message ID 20190522183707.19326-14-lokeshvutla@ti.com
State Superseded
Delegated to: Tom Rini
Headers show
Series arm: k3: arm64: Initial support Texas Instrument's J721E Platform | expand

Commit Message

Lokesh Vutla May 22, 2019, 6:37 p.m. UTC
Add initial defconfig support for J721e that runs on R5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 configs/j721e_evm_r5_defconfig | 85 ++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)
 create mode 100644 configs/j721e_evm_r5_defconfig
diff mbox series

Patch

diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
new file mode 100644
index 0000000000..3faef67047
--- /dev/null
+++ b/configs/j721e_evm_r5_defconfig
@@ -0,0 +1,85 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x55000
+CONFIG_SOC_K3_J721E=y
+CONFIG_TARGET_J721E_R5_EVM=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_USE_BOOTCOMMAND=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0x41c00000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_REMOTEPROC=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_DOS_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board"
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_GPIO=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_MISC=y
+CONFIG_FS_LOADER=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y