Message ID | 20190416042428.5007-4-takahiro.akashi@linaro.org |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | efi_loader: rework bootefi/bootmgr | expand |
On 4/16/19 6:24 AM, AKASHI Takahiro wrote: > This is a preparatory patch for reworking do_bootefi() in later patch. I would prefer a more informative commit message like: Carve out a function to handle the installation of the device tree as a configuration table. Otherwise Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > --- > cmd/bootefi.c | 53 ++++++++++++++++++++++++++++++++++++--------------- > 1 file changed, 38 insertions(+), 15 deletions(-) > > diff --git a/cmd/bootefi.c b/cmd/bootefi.c > index 3619a20e6433..8cd9644115eb 100644 > --- a/cmd/bootefi.c > +++ b/cmd/bootefi.c > @@ -198,6 +198,38 @@ static efi_status_t efi_install_fdt(ulong fdt_addr) > return ret; > } > > +/** > + * efi_process_fdt() - process fdt passed by a command argument > + * @fdt_opt: pointer to argument > + * Return: status code > + * > + * If specified, fdt will be installed as configuration table, > + * otherwise no fdt will be passed. > + */ > +static efi_status_t efi_process_fdt(const char *fdt_opt) > +{ > + unsigned long fdt_addr; > + efi_status_t ret; > + > + if (fdt_opt) { > + fdt_addr = simple_strtoul(fdt_opt, NULL, 16); > + if (!fdt_addr && *fdt_opt != '0') > + return EFI_INVALID_PARAMETER; > + > + /* Install device tree */ > + ret = efi_install_fdt(fdt_addr); > + if (ret != EFI_SUCCESS) { > + printf("ERROR: failed to install device tree\n"); > + return ret; > + } > + } else { > + /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > + efi_install_configuration_table(&efi_guid_fdt, NULL); > + } > + > + return EFI_SUCCESS; > +} > + > static efi_status_t bootefi_run_prepare(const char *load_options_path, > struct efi_device_path *device_path, > struct efi_device_path *image_path, > @@ -407,21 +439,12 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > if (argc < 2) > return CMD_RET_USAGE; > > - if (argc > 2) { > - fdt_addr = simple_strtoul(argv[2], NULL, 16); > - if (!fdt_addr && *argv[2] != '0') > - return CMD_RET_USAGE; > - /* Install device tree */ > - r = efi_install_fdt(fdt_addr); > - if (r != EFI_SUCCESS) { > - printf("ERROR: failed to install device tree\n"); > - return CMD_RET_FAILURE; > - } > - } else { > - /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > - efi_install_configuration_table(&efi_guid_fdt, NULL); > - printf("WARNING: booting without device tree\n"); > - } > + r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); > + if (r == EFI_INVALID_PARAMETER) > + return CMD_RET_USAGE; > + else if (r != EFI_SUCCESS) > + return CMD_RET_FAILURE; > + > #ifdef CONFIG_CMD_BOOTEFI_HELLO > if (!strcmp(argv[1], "hello")) { > ulong size = __efi_helloworld_end - __efi_helloworld_begin; >
On Tue, Apr 16, 2019 at 06:54:58AM +0200, Heinrich Schuchardt wrote: > On 4/16/19 6:24 AM, AKASHI Takahiro wrote: > >This is a preparatory patch for reworking do_bootefi() in later patch. > > I would prefer a more informative commit message like: > > Carve out a function to handle the installation of the device tree as a > configuration table. Okay, but it doesn't convey more than the subject. -Takahiro Akashi > Otherwise > Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > > > > >Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > >--- > > cmd/bootefi.c | 53 ++++++++++++++++++++++++++++++++++++--------------- > > 1 file changed, 38 insertions(+), 15 deletions(-) > > > >diff --git a/cmd/bootefi.c b/cmd/bootefi.c > >index 3619a20e6433..8cd9644115eb 100644 > >--- a/cmd/bootefi.c > >+++ b/cmd/bootefi.c > >@@ -198,6 +198,38 @@ static efi_status_t efi_install_fdt(ulong fdt_addr) > > return ret; > > } > > > >+/** > >+ * efi_process_fdt() - process fdt passed by a command argument > >+ * @fdt_opt: pointer to argument > >+ * Return: status code > >+ * > >+ * If specified, fdt will be installed as configuration table, > >+ * otherwise no fdt will be passed. > >+ */ > >+static efi_status_t efi_process_fdt(const char *fdt_opt) > >+{ > >+ unsigned long fdt_addr; > >+ efi_status_t ret; > >+ > >+ if (fdt_opt) { > >+ fdt_addr = simple_strtoul(fdt_opt, NULL, 16); > >+ if (!fdt_addr && *fdt_opt != '0') > >+ return EFI_INVALID_PARAMETER; > >+ > >+ /* Install device tree */ > >+ ret = efi_install_fdt(fdt_addr); > >+ if (ret != EFI_SUCCESS) { > >+ printf("ERROR: failed to install device tree\n"); > >+ return ret; > >+ } > >+ } else { > >+ /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > >+ efi_install_configuration_table(&efi_guid_fdt, NULL); > >+ } > >+ > >+ return EFI_SUCCESS; > >+} > >+ > > static efi_status_t bootefi_run_prepare(const char *load_options_path, > > struct efi_device_path *device_path, > > struct efi_device_path *image_path, > >@@ -407,21 +439,12 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > > if (argc < 2) > > return CMD_RET_USAGE; > > > >- if (argc > 2) { > >- fdt_addr = simple_strtoul(argv[2], NULL, 16); > >- if (!fdt_addr && *argv[2] != '0') > >- return CMD_RET_USAGE; > >- /* Install device tree */ > >- r = efi_install_fdt(fdt_addr); > >- if (r != EFI_SUCCESS) { > >- printf("ERROR: failed to install device tree\n"); > >- return CMD_RET_FAILURE; > >- } > >- } else { > >- /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > >- efi_install_configuration_table(&efi_guid_fdt, NULL); > >- printf("WARNING: booting without device tree\n"); > >- } > >+ r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); > >+ if (r == EFI_INVALID_PARAMETER) > >+ return CMD_RET_USAGE; > >+ else if (r != EFI_SUCCESS) > >+ return CMD_RET_FAILURE; > >+ > > #ifdef CONFIG_CMD_BOOTEFI_HELLO > > if (!strcmp(argv[1], "hello")) { > > ulong size = __efi_helloworld_end - __efi_helloworld_begin; > > >
On 4/17/19 9:01 AM, AKASHI Takahiro wrote: > On Tue, Apr 16, 2019 at 06:54:58AM +0200, Heinrich Schuchardt wrote: >> On 4/16/19 6:24 AM, AKASHI Takahiro wrote: >>> This is a preparatory patch for reworking do_bootefi() in later patch. >> >> I would prefer a more informative commit message like: >> >> Carve out a function to handle the installation of the device tree as a >> configuration table. > > Okay, but it doesn't convey more than the subject. > > -Takahiro Akashi > >> Otherwise >> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >> >>> >>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> >>> --- >>> cmd/bootefi.c | 53 ++++++++++++++++++++++++++++++++++++--------------- >>> 1 file changed, 38 insertions(+), 15 deletions(-) >>> >>> diff --git a/cmd/bootefi.c b/cmd/bootefi.c >>> index 3619a20e6433..8cd9644115eb 100644 >>> --- a/cmd/bootefi.c >>> +++ b/cmd/bootefi.c >>> @@ -198,6 +198,38 @@ static efi_status_t efi_install_fdt(ulong fdt_addr) >>> return ret; >>> } >>> >>> +/** >>> + * efi_process_fdt() - process fdt passed by a command argument >>> + * @fdt_opt: pointer to argument >>> + * Return: status code >>> + * >>> + * If specified, fdt will be installed as configuration table, >>> + * otherwise no fdt will be passed. >>> + */ >>> +static efi_status_t efi_process_fdt(const char *fdt_opt) >>> +{ >>> + unsigned long fdt_addr; >>> + efi_status_t ret; >>> + >>> + if (fdt_opt) { >>> + fdt_addr = simple_strtoul(fdt_opt, NULL, 16); >>> + if (!fdt_addr && *fdt_opt != '0') >>> + return EFI_INVALID_PARAMETER; >>> + >>> + /* Install device tree */ >>> + ret = efi_install_fdt(fdt_addr); >>> + if (ret != EFI_SUCCESS) { >>> + printf("ERROR: failed to install device tree\n"); >>> + return ret; >>> + } >>> + } else { >>> + /* Remove device tree. EFI_NOT_FOUND can be ignored here */ >>> + efi_install_configuration_table(&efi_guid_fdt, NULL); >>> + } >>> + >>> + return EFI_SUCCESS; >>> +} >>> + >>> static efi_status_t bootefi_run_prepare(const char *load_options_path, >>> struct efi_device_path *device_path, >>> struct efi_device_path *image_path, >>> @@ -407,21 +439,12 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) >>> if (argc < 2) >>> return CMD_RET_USAGE; >>> >>> - if (argc > 2) { >>> - fdt_addr = simple_strtoul(argv[2], NULL, 16); >>> - if (!fdt_addr && *argv[2] != '0') >>> - return CMD_RET_USAGE; >>> - /* Install device tree */ >>> - r = efi_install_fdt(fdt_addr); >>> - if (r != EFI_SUCCESS) { >>> - printf("ERROR: failed to install device tree\n"); >>> - return CMD_RET_FAILURE; >>> - } >>> - } else { >>> - /* Remove device tree. EFI_NOT_FOUND can be ignored here */ >>> - efi_install_configuration_table(&efi_guid_fdt, NULL); >>> - printf("WARNING: booting without device tree\n"); >>> - } >>> + r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); cmd/bootefi.c: In function ‘do_bootefi’: cmd/bootefi.c:442:6: warning: implicit declaration of function ‘fdt_process_fdt’; did you mean ‘efi_process_fdt’? [-Wimplicit-function-declaration] r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); ^~~~~~~~~~~~~~~ efi_process_fdt cmd/bootefi.c:424:16: warning: unused variable ‘fdt_addr’ [-Wunused-variable] unsigned long fdt_addr; ^~~~~~~~ At top level: CC drivers/virtio/virtio_pci_legacy.o cmd/bootefi.c:209:21: warning: ‘efi_process_fdt’ defined but not used [-Wunused-function] static efi_status_t efi_process_fdt(const char *fdt_opt) ^~~~~~~~~~~~~~~ Please, check. Best regards Heinrich >>> + if (r == EFI_INVALID_PARAMETER) >>> + return CMD_RET_USAGE; >>> + else if (r != EFI_SUCCESS) >>> + return CMD_RET_FAILURE; >>> + >>> #ifdef CONFIG_CMD_BOOTEFI_HELLO >>> if (!strcmp(argv[1], "hello")) { >>> ulong size = __efi_helloworld_end - __efi_helloworld_begin; >>> >> >
On Wed, Apr 17, 2019 at 06:35:57PM +0200, Heinrich Schuchardt wrote: > On 4/17/19 9:01 AM, AKASHI Takahiro wrote: > >On Tue, Apr 16, 2019 at 06:54:58AM +0200, Heinrich Schuchardt wrote: > >>On 4/16/19 6:24 AM, AKASHI Takahiro wrote: > >>>This is a preparatory patch for reworking do_bootefi() in later patch. > >> > >>I would prefer a more informative commit message like: > >> > >>Carve out a function to handle the installation of the device tree as a > >>configuration table. > > > >Okay, but it doesn't convey more than the subject. > > > >-Takahiro Akashi > > > >>Otherwise > >>Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > >> > >>> > >>>Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > >>>--- > >>> cmd/bootefi.c | 53 ++++++++++++++++++++++++++++++++++++--------------- > >>> 1 file changed, 38 insertions(+), 15 deletions(-) > >>> > >>>diff --git a/cmd/bootefi.c b/cmd/bootefi.c > >>>index 3619a20e6433..8cd9644115eb 100644 > >>>--- a/cmd/bootefi.c > >>>+++ b/cmd/bootefi.c > >>>@@ -198,6 +198,38 @@ static efi_status_t efi_install_fdt(ulong fdt_addr) > >>> return ret; > >>> } > >>> > >>>+/** > >>>+ * efi_process_fdt() - process fdt passed by a command argument > >>>+ * @fdt_opt: pointer to argument > >>>+ * Return: status code > >>>+ * > >>>+ * If specified, fdt will be installed as configuration table, > >>>+ * otherwise no fdt will be passed. > >>>+ */ > >>>+static efi_status_t efi_process_fdt(const char *fdt_opt) > >>>+{ > >>>+ unsigned long fdt_addr; > >>>+ efi_status_t ret; > >>>+ > >>>+ if (fdt_opt) { > >>>+ fdt_addr = simple_strtoul(fdt_opt, NULL, 16); > >>>+ if (!fdt_addr && *fdt_opt != '0') > >>>+ return EFI_INVALID_PARAMETER; > >>>+ > >>>+ /* Install device tree */ > >>>+ ret = efi_install_fdt(fdt_addr); > >>>+ if (ret != EFI_SUCCESS) { > >>>+ printf("ERROR: failed to install device tree\n"); > >>>+ return ret; > >>>+ } > >>>+ } else { > >>>+ /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > >>>+ efi_install_configuration_table(&efi_guid_fdt, NULL); > >>>+ } > >>>+ > >>>+ return EFI_SUCCESS; > >>>+} > >>>+ > >>> static efi_status_t bootefi_run_prepare(const char *load_options_path, > >>> struct efi_device_path *device_path, > >>> struct efi_device_path *image_path, > >>>@@ -407,21 +439,12 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > >>> if (argc < 2) > >>> return CMD_RET_USAGE; > >>> > >>>- if (argc > 2) { > >>>- fdt_addr = simple_strtoul(argv[2], NULL, 16); > >>>- if (!fdt_addr && *argv[2] != '0') > >>>- return CMD_RET_USAGE; > >>>- /* Install device tree */ > >>>- r = efi_install_fdt(fdt_addr); > >>>- if (r != EFI_SUCCESS) { > >>>- printf("ERROR: failed to install device tree\n"); > >>>- return CMD_RET_FAILURE; > >>>- } > >>>- } else { > >>>- /* Remove device tree. EFI_NOT_FOUND can be ignored here */ > >>>- efi_install_configuration_table(&efi_guid_fdt, NULL); > >>>- printf("WARNING: booting without device tree\n"); > >>>- } > >>>+ r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); > > cmd/bootefi.c: In function ‘do_bootefi’: > cmd/bootefi.c:442:6: warning: implicit declaration of function > ‘fdt_process_fdt’; did you mean ‘efi_process_fdt’? > [-Wimplicit-function-declaration] > r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); > ^~~~~~~~~~~~~~~ > efi_process_fdt Oops. I think that I fixed it before. Will fix along with patch#4. > cmd/bootefi.c:424:16: warning: unused variable ‘fdt_addr’ > [-Wunused-variable] > unsigned long fdt_addr; > ^~~~~~~~ Okay. Thanks, -Takahiro Akashi > At top level: > CC drivers/virtio/virtio_pci_legacy.o > cmd/bootefi.c:209:21: warning: ‘efi_process_fdt’ defined but not used > [-Wunused-function] > static efi_status_t efi_process_fdt(const char *fdt_opt) > ^~~~~~~~~~~~~~~ > > Please, check. > > Best regards > > Heinrich > > >>>+ if (r == EFI_INVALID_PARAMETER) > >>>+ return CMD_RET_USAGE; > >>>+ else if (r != EFI_SUCCESS) > >>>+ return CMD_RET_FAILURE; > >>>+ > >>> #ifdef CONFIG_CMD_BOOTEFI_HELLO > >>> if (!strcmp(argv[1], "hello")) { > >>> ulong size = __efi_helloworld_end - __efi_helloworld_begin; > >>> > >> > > >
diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 3619a20e6433..8cd9644115eb 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -198,6 +198,38 @@ static efi_status_t efi_install_fdt(ulong fdt_addr) return ret; } +/** + * efi_process_fdt() - process fdt passed by a command argument + * @fdt_opt: pointer to argument + * Return: status code + * + * If specified, fdt will be installed as configuration table, + * otherwise no fdt will be passed. + */ +static efi_status_t efi_process_fdt(const char *fdt_opt) +{ + unsigned long fdt_addr; + efi_status_t ret; + + if (fdt_opt) { + fdt_addr = simple_strtoul(fdt_opt, NULL, 16); + if (!fdt_addr && *fdt_opt != '0') + return EFI_INVALID_PARAMETER; + + /* Install device tree */ + ret = efi_install_fdt(fdt_addr); + if (ret != EFI_SUCCESS) { + printf("ERROR: failed to install device tree\n"); + return ret; + } + } else { + /* Remove device tree. EFI_NOT_FOUND can be ignored here */ + efi_install_configuration_table(&efi_guid_fdt, NULL); + } + + return EFI_SUCCESS; +} + static efi_status_t bootefi_run_prepare(const char *load_options_path, struct efi_device_path *device_path, struct efi_device_path *image_path, @@ -407,21 +439,12 @@ static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc < 2) return CMD_RET_USAGE; - if (argc > 2) { - fdt_addr = simple_strtoul(argv[2], NULL, 16); - if (!fdt_addr && *argv[2] != '0') - return CMD_RET_USAGE; - /* Install device tree */ - r = efi_install_fdt(fdt_addr); - if (r != EFI_SUCCESS) { - printf("ERROR: failed to install device tree\n"); - return CMD_RET_FAILURE; - } - } else { - /* Remove device tree. EFI_NOT_FOUND can be ignored here */ - efi_install_configuration_table(&efi_guid_fdt, NULL); - printf("WARNING: booting without device tree\n"); - } + r = fdt_process_fdt(argc > 2 ? argv[2] : NULL); + if (r == EFI_INVALID_PARAMETER) + return CMD_RET_USAGE; + else if (r != EFI_SUCCESS) + return CMD_RET_FAILURE; + #ifdef CONFIG_CMD_BOOTEFI_HELLO if (!strcmp(argv[1], "hello")) { ulong size = __efi_helloworld_end - __efi_helloworld_begin;
This is a preparatory patch for reworking do_bootefi() in later patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> --- cmd/bootefi.c | 53 ++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 38 insertions(+), 15 deletions(-)