@@ -236,6 +236,7 @@ static int efi_process_fdt(const char *fdt_opt)
* do_bootefi_exec() - execute EFI binary
*
* @efi: address of the binary
+ * @efi_size: size of the binary
* @device_path: path of the device from which the binary was loaded
* @image_path: device path of the binary
* Return: status code
@@ -243,15 +244,16 @@ static int efi_process_fdt(const char *fdt_opt)
* Load the EFI binary into a newly assigned memory unwinding the relocation
* information, install the loaded image protocol, and call the binary.
*/
-static efi_status_t do_bootefi_exec(void *efi,
+static efi_status_t do_bootefi_exec(void *efi, efi_uintn_t efi_size,
struct efi_device_path *device_path,
struct efi_device_path *image_path)
{
- efi_handle_t mem_handle = NULL;
+ efi_handle_t mem_handle = NULL, handle;
struct efi_device_path *memdp = NULL;
- efi_status_t ret;
+ struct efi_device_path *file_path = NULL;
struct efi_loaded_image_obj *image_obj = NULL;
struct efi_loaded_image *loaded_image_info = NULL;
+ efi_status_t ret;
/*
* Special case for efi payload not loaded from disk, such as
@@ -260,36 +262,42 @@ static efi_status_t do_bootefi_exec(void *efi,
*/
if (!device_path && !image_path) {
printf("WARNING: using memory device/image path, this may confuse some payloads!\n");
- /* actual addresses filled in after efi_load_pe() */
+ /* actual addresses filled in after efi_load_image() */
memdp = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, 0, 0);
- device_path = image_path = memdp;
+ file_path = memdp; /* append(memdp, NULL) */
/*
- * Grub expects that the device path of the loaded image is
- * installed on a handle.
+ * Make sure that device for device_path exist
+ * in load_image(). Otherwise, shell and grub will fail.
*/
ret = efi_create_handle(&mem_handle);
- if (ret != EFI_SUCCESS)
+ if (ret != EFI_SUCCESS) {
+ efi_free_pool(memdp);
return ret; /* TODO: leaks device_path */
+ }
ret = efi_add_protocol(mem_handle, &efi_guid_device_path,
- device_path);
+ memdp);
if (ret != EFI_SUCCESS)
goto err_add_protocol;
} else {
assert(device_path && image_path);
+ file_path = efi_dp_append(device_path, image_path);
}
- ret = efi_setup_loaded_image(device_path, image_path, &image_obj,
- &loaded_image_info);
- if (ret)
+ ret = EFI_CALL(efi_load_image(false, (void *)0x1 /* FIXME */, file_path,
+ efi, efi_size, &handle));
+ if (ret != EFI_SUCCESS)
goto err_prepare;
/* Transfer environment variable as load options */
- set_load_options(loaded_image_info, "bootargs");
-
- /* Load the EFI payload */
- ret = efi_load_pe(image_obj, efi, loaded_image_info);
+ ret = EFI_CALL(systab.boottime->open_protocol(
+ handle,
+ &efi_guid_loaded_image,
+ (void **)&loaded_image_info,
+ NULL, NULL,
+ EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL));
if (ret != EFI_SUCCESS)
goto err_prepare;
+ set_load_options(loaded_image_info, "bootargs");
if (memdp) {
struct efi_device_path_memory *mdp = (void *)memdp;
@@ -304,41 +312,154 @@ static efi_status_t do_bootefi_exec(void *efi,
"{ro,boot}(blob)0000000000000000");
/* Call our payload! */
+ image_obj = container_of(handle, struct efi_loaded_image_obj, header);
debug("%s: Jumping to 0x%p\n", __func__, image_obj->entry);
- ret = EFI_CALL(efi_start_image(&image_obj->header, NULL, NULL));
+ ret = EFI_CALL(efi_start_image(handle, NULL, NULL));
err_prepare:
- /* image has returned, loaded-image obj goes *poof*: */
efi_restore_gd();
free(loaded_image_info->load_options);
- efi_delete_handle(&image_obj->header);
+ ret = EFI_CALL(efi_unload_image(handle));
err_add_protocol:
if (mem_handle)
efi_delete_handle(mem_handle);
+ if (device_path)
+ efi_free_pool(file_path);
return ret;
}
-static int do_bootefi_bootmgr_exec(void)
+/**
+ * do_efibootmgr() - execute EFI Boot Manager
+ *
+ * @fdt_opt: string of fdt start address
+ * Return: status code
+ *
+ * Execute EFI Boot Manager
+ */
+static int do_efibootmgr(const char *fdt_opt)
+{
+ void *image_buf;
+ efi_uintn_t buf_size;
+ struct efi_device_path *device_path, *image_path;
+ unsigned long addr;
+ efi_status_t r;
+ int ret;
+
+ /* Allow unaligned memory access */
+ allow_unaligned();
+
+ switch_to_non_secure_mode();
+
+ /* Initialize EFI drivers */
+ r = efi_init_obj_list();
+ if (r != EFI_SUCCESS) {
+ printf("Error: Cannot set up EFI drivers, r = %lu\n",
+ r & ~EFI_ERROR_MASK);
+ return CMD_RET_FAILURE;
+ }
+
+ ret = efi_process_fdt(fdt_opt);
+ if (ret != EFI_SUCCESS)
+ return ret;
+
+ r = efi_bootmgr_load(&device_path, &image_path, &image_buf, &buf_size);
+ if (r != EFI_SUCCESS)
+ return CMD_RET_FAILURE;
+
+ addr = map_to_sysmem(image_buf);
+
+ printf("## Starting EFI application at %08lx ...\n", addr);
+ r = do_bootefi_exec(image_buf, buf_size, device_path, image_path);
+ printf("## Application terminated, r = %lu\n", r & ~EFI_ERROR_MASK);
+
+ if (r != EFI_SUCCESS)
+ return CMD_RET_FAILURE;
+
+ return CMD_RET_SUCCESS;
+}
+
+/*
+ * do_boot_efi() - execute EFI binary from command line
+ *
+ * @image_opt: string of image start address
+ * @fdt_opt: string of fdt start address
+ * Return: status code
+ *
+ * Set up memory image for the binary to be loaded, prepare
+ * device path and then call do_bootefi_exec() to execute it.
+ */
+static int do_boot_efi(const char *image_opt, const char *fdt_opt)
{
- struct efi_device_path *device_path, *file_path;
- void *addr;
+ void *image_buf;
+ struct efi_device_path *device_path, *image_path;
+ const char *saddr;
+ unsigned long addr, size;
+ const char *size_str;
efi_status_t r;
- addr = efi_bootmgr_load(&device_path, &file_path);
- if (!addr)
- return 1;
+ /* Allow unaligned memory access */
+ allow_unaligned();
- printf("## Starting EFI application at %p ...\n", addr);
- r = do_bootefi_exec(addr, device_path, file_path);
- printf("## Application terminated, r = %lu\n",
- r & ~EFI_ERROR_MASK);
+ switch_to_non_secure_mode();
+ /* Initialize EFI drivers */
+ r = efi_init_obj_list();
+ if (r != EFI_SUCCESS) {
+ printf("Error: Cannot set up EFI drivers, r = %lu\n",
+ r & ~EFI_ERROR_MASK);
+ return CMD_RET_FAILURE;
+ }
+
+ r = efi_process_fdt(fdt_opt);
if (r != EFI_SUCCESS)
- return 1;
+ return r;
- return 0;
+#ifdef CONFIG_CMD_BOOTEFI_HELLO
+ if (!strcmp(image_opt, "hello")) {
+ saddr = env_get("loadaddr");
+ size = __efi_helloworld_end - __efi_helloworld_begin;
+
+ if (saddr)
+ addr = simple_strtoul(saddr, NULL, 16);
+ else
+ addr = CONFIG_SYS_LOAD_ADDR;
+
+ image_buf = map_sysmem(addr, size);
+ memcpy(image_buf, __efi_helloworld_begin, size);
+
+ device_path = NULL;
+ image_path = NULL;
+ } else
+#endif
+ {
+ saddr = image_opt;
+ size_str = env_get("filesize");
+ if (size_str)
+ size = simple_strtoul(size_str, NULL, 16);
+ else
+ size = 0;
+
+ addr = simple_strtoul(saddr, NULL, 16);
+ /* Check that a numeric value was passed */
+ if (!addr && *saddr != '0')
+ return CMD_RET_USAGE;
+
+ image_buf = map_sysmem(addr, size);
+
+ device_path = bootefi_device_path;
+ image_path = bootefi_image_path;
+ }
+
+ printf("## Starting EFI application at %08lx ...\n", addr);
+ r = do_bootefi_exec(image_buf, size, device_path, image_path);
+ printf("## Application terminated, r = %lu\n", r & ~EFI_ERROR_MASK);
+
+ if (r != EFI_SUCCESS)
+ return CMD_RET_FAILURE;
+
+ return CMD_RET_SUCCESS;
}
#ifdef CONFIG_CMD_BOOTEFI_SELFTEST
@@ -468,69 +589,17 @@ static int do_efi_selftest(const char *fdt_opt)
/* Interpreter command to boot an arbitrary EFI image from memory */
static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned long addr;
- char *saddr;
- efi_status_t r;
- unsigned long fdt_addr;
-
if (argc < 2)
return CMD_RET_USAGE;
+
+ if (!strcmp(argv[1], "bootmgr"))
+ return do_efibootmgr(argc > 2 ? argv[2] : NULL);
#ifdef CONFIG_CMD_BOOTEFI_SELFTEST
else if (!strcmp(argv[1], "selftest"))
return do_efi_selftest(argc > 2 ? argv[2] : NULL);
#endif
- /* Allow unaligned memory access */
- allow_unaligned();
-
- switch_to_non_secure_mode();
-
- /* Initialize EFI drivers */
- r = efi_init_obj_list();
- if (r != EFI_SUCCESS) {
- printf("Error: Cannot set up EFI drivers, r = %lu\n",
- r & ~EFI_ERROR_MASK);
- return CMD_RET_FAILURE;
- }
-
- ret = fdt_process_fdt(argc > 2 ? argv[2] : NULL);
- if (ret != EFI_SUCCESS)
- return ret;
-
-#ifdef CONFIG_CMD_BOOTEFI_HELLO
- if (!strcmp(argv[1], "hello")) {
- ulong size = __efi_helloworld_end - __efi_helloworld_begin;
-
- saddr = env_get("loadaddr");
- if (saddr)
- addr = simple_strtoul(saddr, NULL, 16);
- else
- addr = CONFIG_SYS_LOAD_ADDR;
- memcpy(map_sysmem(addr, size), __efi_helloworld_begin, size);
- } else
-#endif
- if (!strcmp(argv[1], "bootmgr")) {
- return do_bootefi_bootmgr_exec();
- } else {
- saddr = argv[1];
-
- addr = simple_strtoul(saddr, NULL, 16);
- /* Check that a numeric value was passed */
- if (!addr && *saddr != '0')
- return CMD_RET_USAGE;
-
- }
-
- printf("## Starting EFI application at %08lx ...\n", addr);
- r = do_bootefi_exec(map_sysmem(addr, 0), bootefi_device_path,
- bootefi_image_path);
- printf("## Application terminated, r = %lu\n",
- r & ~EFI_ERROR_MASK);
-
- if (r != EFI_SUCCESS)
- return 1;
- else
- return 0;
+ return do_boot_efi(argv[1], argc > 2 ? argv[2] : NULL);
}
#ifdef CONFIG_SYS_LONGHELP
@@ -549,7 +618,7 @@ static char bootefi_help_text[] =
" Use environment variable efi_selftest to select a single test.\n"
" Use 'setenv efi_selftest list' to enumerate all tests.\n"
#endif
- "bootefi bootmgr [fdt addr]\n"
+ "bootefi bootmgr [fdt address]\n"
" - load and boot EFI payload based on BootOrder/BootXXXX variables.\n"
"\n"
" If specified, the device tree located at <fdt address> gets\n"
@@ -574,6 +643,13 @@ void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
ret = efi_dp_from_name(dev, devnr, path, &device, &image);
if (ret == EFI_SUCCESS) {
bootefi_device_path = device;
+ if (image) {
+ /* FIXME: image should not contain device */
+ struct efi_device_path *image_tmp = image;
+
+ efi_dp_split_file_path(image, &device, &image);
+ efi_free_pool(image_tmp);
+ }
bootefi_image_path = image;
} else {
bootefi_device_path = NULL;
@@ -1703,11 +1703,6 @@ efi_status_t EFIAPI efi_load_image(bool boot_policy,
&source_size);
if (ret != EFI_SUCCESS)
goto error;
- /*
- * split file_path which contains both the device and
- * file parts:
- */
- efi_dp_split_file_path(file_path, &dp, &fp);
} else {
/* In this case, file_path is the "device" path, i.e.
* something like a HARDWARE_DEVICE:MEMORY_MAPPED
@@ -1723,10 +1718,13 @@ efi_status_t EFIAPI efi_load_image(bool boot_policy,
dest_buffer = (void *)(uintptr_t)addr;
memcpy(dest_buffer, source_buffer, source_size);
source_buffer = dest_buffer;
-
- dp = file_path;
- fp = NULL;
}
+ /*
+ * split file_path which contains both the device and
+ * file parts:
+ */
+ efi_dp_split_file_path(file_path, &dp, &fp);
+
ret = efi_setup_loaded_image(dp, fp, image_obj, &info);
if (ret != EFI_SUCCESS)
goto error_invalid_image;
In this patch, do_bootefi() and do_bootefi_exec() will be reworked, without any functional change so that load_image() API as well as start_image() are used in the implementation. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> --- cmd/bootefi.c | 252 ++++++++++++++++++++++------------ lib/efi_loader/efi_boottime.c | 14 +- 2 files changed, 170 insertions(+), 96 deletions(-)